[ECOS] Rooki needing help: upgrading Meraki Outdoor
Gary Thomas
gary@mlbassoc.com
Thu Dec 20 07:29:00 GMT 2007
Xavier Martinez wrote:
> Hi,
>
> We are trying to flash a "Meraki Outdoor" router with the openwrt
> kamikaze 7.09 firmware via Redboot. Unfortunately, the unit reboots
> after a few minutes of entering the redboot and we are not able to
> finish writing the linux and rootfs partitions. It seems like the
> redboot of this unit (unreleased version 1.3) has some kind of bug and
> we would like to load a newer version of the redboot. The board is
> identified as AP61 and we suspect that its athero chipset is based on
> MIPS 4kc architecture. We would like to gain ethernet and serial
> access in order to flash the firmware.
>
> However we haven't tried to update the redboot before and we wouldn't
> like to end with a plastic brick in our hands. We would be very
> pleased if someone could give advice on how to update the redboot on
> this unit.
This device is not in the public CVS, so help on this list
may be quite limited.
I would expect that you could build a RAM startup version
of RedBoot, load that and then work from there. If this
works, you should be able to verify the proper operation
of the unit & RedBoot before committing any new ROM code.
I presume that you have the sources for the RedBoot in question?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
More information about the Ecos-discuss
mailing list