[ECOS] Port eCos Redboot Olimex LPC2294 to Embest LPCEB2000 (lpc2292)
Miklos.Pflancer@dBResearch.co.uk
Miklos.Pflancer@dBResearch.co.uk
Wed Sep 20 14:52:00 GMT 2006
Hi Andrew
I still thinks there is a problem with the gdb stubs in redboot. I
can load and run a standalone application which uses interrupts into
external ram using gdb, however If I set breakpoints or try to
single step the application stops and gdb becomes unresponsive.
I can burn the same application into flash and load with Redboot and
this works fine.
I was wondering if there are options in the configtool which should
be selected but are'nt. I am not familiar with many of these
settings.
Best Regards
Miklos
> On Tue, Sep 19, 2006 at 03:29:56PM +0100,
Miklos.Pflancer@dBResearch.co.uk wrote:
> > Hi Andrew
> >
> > Ive been looking in the hal_platform_setup and it seems as though
> > Redboot copies the first 64 bytes of vectors to internal SRAM. An
> > then remaps the vectors to internal SRAM.
> >
> > What then happens if an interrupt occurs in my code, How is it
> > handled by Redboot.
> >
> > Should I copy by vectors to this location?
> >
> > I am a bit confused
>
> Is you application an eCos application? If so eCos will do this
> itself.
>
> However if you are writing a standalone application which does not
use
> eCos, you have to look after interrupts yourself.
>
> Andrew
>
Miklos Pflancer
Electronics Engineer
--------------------------------------------------
email : miklos@dbresearch.co.uk
--------------------------------------------------
dB Research Ltd
Concept House
Merton Road
Bootle
Liverpool L20 3BG
UK
Tel (+44)(0)151 330 0800
Fax (+44)(0)151 330 0808
--------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
More information about the Ecos-discuss
mailing list