[ECOS] Re: Fwd: [ECOS] Re: install ecos on debian 1.3.3.5

mirko massignani mirko.massignani@gmail.com
Thu Sep 14 06:41:00 GMT 2006


Yes there is, but i use only:

eth0 ethertap

isn't it sufficient?

On 9/13/06, Andrew Lunn <andrew@lunn.ch> wrote:
> > I have an application composed from two modules, transmitter on ecos e
> > receiver on linux, the receiver connect to the socket and transmitter makes
> > the accept, but when application arrives to this point of execution the two
> > modules do not comunicate and errors do not return, only connect :
> > Connection timed out.
> >
> > I use ethertap and my /etc/network/interfaces  is:
> >
> > # The loopback network interface
> > auto lo
> > iface lo inet loopback
> > address 127.0.0.1
> > netmask 255.0.0.0
> >
> > # The primary network interface
> > auto eth0
> > iface eth0 inet dhcp
> >
> > auto tap0
> > iface tap0 inet static
> > address 192.168.1.1
> > netmask 255.255.255.0
> > broadcast 192.168.1.255
> > network 192.168.1.0
> >
> > and in my file.ecc
> >
> > ip address for eth0 192.168.1.2
> > networkmask 255.255.255.0
> > broadcast address 192.168.1.255
> > gateway/router ip address 192.168.1.1
> > server ip address 192.168.1.101
>
> What do you have in the ethernet.tdf file? You need something like:
>
> eth0 ethertap tap0 00:FE:42:63:84:A5
>
>      Andrew
>

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss



More information about the Ecos-discuss mailing list