[ECOS] problem in making ethernet up on ecos ported on AT91RM9200
Fri Nov 17 12:04:00 GMT 2006
I m facing one problem on ecos. I am new to this ecos stuff. I am not able
to up the network on the ecos.
Even ping call is not working. Every time I try to ping the hardware its
saying “Request timed Out”.
When I am running the client program on other PC n server on other then
there is no problem. When my client program is running on H/w and server on
the PC then on connect system call it shows “Request timed out”. There is no
problem with the hardware as when I am loading redboot at that time the ping
is working fine but as soon as I load the application program( i.e my
client) at that time I am not able to ping. It says “operation timed out”. I
have also used init_all_network_interfaces();
When this function runs then it displays
cyg_Scheduler::start();BOOTP[eth0] op: REPLY
client IP: 220.127.116.11
my IP: 18.104.22.168
server IP: 22.214.171.124
gateway IP: 0.0.0.0
subnet mask: 255.255.255.0
IP broadcast: 126.96.36.199
here I am not able to understand why it calls at91rm9200_eth_stop().
Hardware v r using it is AT91rm9200.Kindly suggest me the way. A quick
response will be appreciated.
Thanks in advance
View this message in context: http://www.nabble.com/problem-in-making-ethernet-up-on-ecos-ported-on-AT91RM9200-tf2651154.html#a7398260
Sent from the Sourceware - ecos-discuss mailing list archive at Nabble.com.
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
More information about the Ecos-discuss