[ECOS] At input of a symbol $ restart redboot

Igor Ivanov aristotelevich@oaoesp.ru
Thu Jun 29 15:28:00 GMT 2006


Hello

At input of a symbol $ restart redboot.

I add debugging messages in 
ecos-trunk-full-060604\ecos\packages\redboot\current\src\main.c(383)
============
#ifdef CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
            if (res == _GETS_GDB) {
  int dbgchan;
                hal_virtual_comm_table_t *__chan;
                int i;
                // Special case of '$' - need to start GDB protocol
                gdb_active = true;
                // Mask interrupts on all channels
diag_printf("CYGNUM_HAL_VIRTUAL_VECTOR_NUM_CHANNELS = 
%d\n",CYGNUM_HAL_VIRTUAL_VECTOR_NUM_CHANNELS);
diag_printf("Mask interrupts on all channels:\n");
                for (i = 0;  i < CYGNUM_HAL_VIRTUAL_VECTOR_NUM_CHANNELS; 
i++) {
//
diag_printf("- channel %d\n",i);
//
                   CYGACC_CALL_IF_SET_CONSOLE_COMM(i);
                    __chan = CYGACC_CALL_IF_CONSOLE_PROCS();
                    CYGACC_COMM_IF_CONTROL( *__chan, 
__COMMCTL_IRQ_DISABLE );
                }
==============

At input of a symbol $ I receive:

CYGNUM_HAL_VIRTUAL_VECTOR_NUM_CHANNELS = 3
Mask interrupts on all channels:
- channel 0
- channel 1
+Ethernet eth0: MAC address 08:88:12:34:56:78
IP: 192.168.10.198/255.255.255.0, Gateway: 0.0.0.0
Default server: 0.0.0.0
RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version 1.1 - built 19:10:38, Jun 29 2006
Platform: Philips LPC2XXX/Olimex LPC-E2294 (ARM7TDMI-S)
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
RAM: 0x81000000-0x81100000, [0x8100ca60-0x810ed000] available
FLASH: 0x80000000 - 0x80400000, 64 blocks of 0x00010000 bytes each.
RedBoot>

What can it mean?

Igor 



-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss



More information about the Ecos-discuss mailing list