[ECOS] How to start tests with Cygwin

Marcin Chrusciel Marcin.chrusciel@cit.be
Wed Jun 21 13:04:00 GMT 2006


Igor,
Where can I find this port for lpc2294????

Marcin

-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Igor Ivanov
Sent: 21 June 2006 14:18
To: ecos-discuss@sourceware.org
Subject: [ECOS] How to start tests with Cygwin

Hello!
There is a port for Olimex LPC-E2294.
Redboot it is loaded in flash and allows to load an example through 
com-port.
Operational system Windows XP, Cygwin.
How to start tests?
How to connection through Insight-5.3?

At attempt of connection with parameters Remote/Serial, 115200, com1 I 
receive message "Inappropriate ioctl for device".

At attempt of connection with console of Insight receive:
******
(gdb)set remotebaud 115200
(gdb)set debug remote 1
(gdb) target remote /dev/com1
Remote debugging using /dev/com1
Sending packet: $Hc-1#09...putpkt: Junk: Ethernet ethO: HOC address 
08:88:12:34:56:78
IP: 192.168.10.198/255.255.255.0, Gateway: 0.0.0.0
Default seruer: 0.0.0.0
RedBoot(tm) bootstrap and debug enuironment [ROM]
Non
Nak
Sending packet: $Hc-1#09__putpkt: Junk: certified release, version 1.1
Nak
Sending packet: $Hc-1#09...putpkt: Junk: built 17:53:14, Jun 20 2006
Platform: Philips LPC2XXX/01imex LPC
Nak
Sending packet: $Hc-1#9...putpkt: Junk: E2294 (ARM7TDMI
Nak
Timed out.
Timed out.
Timed out.
Ignoring packet error, continuing__
Sending packet: $qC#b4...Nak
Sending packet: $qC#b4...putpkt: Junk: Ethernet ethO: HOC address 
08:88:12:34:56:78
IP: 192.168.10.198/255.255.255.0, Gateway: 0.0.0.0
Default seruer: 0.0.0.0
RedBoot(tm) bootstrap and debug enuironment [ROM]
Non
Nak
Sending packet: $qC#b4__putpkt: Junk: certified release, uersion 1.1
Nak
Sending packet: $qC#b4...putpkt: Junk: built 17:53:14, Jun 20 2006
Platform: Philips LPC2XXX/01imex LPC
Nak
Timed out.
Timed out.
Timed out.
Ignoring packet error, continuing__
Sending packet: $q0ffsets#4b...Nak
Sending packet: $q0ffsets#4b...putpkt: Junk: Ethernet ethO: HOC address 
08:88:12:34:56:78
IP: 192.168.10.198/255.255.255.0, Gateway: 0.0.0.0
Default seruer: 0.0.0.0
RedBoot(tm) bootstrap and debug enuironment [ROM]
Non
Nak
Sending packet: $q0ffsets#4b__putpkt: Junk: certified release, uersion
1.1
Nak
Sending packet: $q0ffsets#4b...putpkt: Junk: built 17:53:14, Jun 20 2006
Platform: Philips LPC2XXX/01imex LPC
Nak
Timed out.
Timed out.
Timed out.
Ignoring packet error, continuing__
Error: Couldn't establish connection to remote target
Malformed response to offset query, timeout
*********
Thanks ahead,

Igor.



-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss



More information about the Ecos-discuss mailing list