[ECOS] Problem with redboot load commande

Andrew Lunn andrew@lunn.ch
Fri Jun 2 12:24:00 GMT 2006


On Fri, Jun 02, 2006 at 06:19:19AM -0600, Gary Thomas wrote:
> On Fri, 2006-06-02 at 14:12 +0200, Philippe-Antoine DAVID wrote:
> > Hello everyone,
> > 
> > I am encountering a strange problem while trying to load a linux kernel 
> > bzImage with redboot, or any other file.
> > 
> > I always get the following message:
> > 
> > I/O error: No such file
> > 
> > I type as following:
> > 
> > Redboot> load -v -r -m http -b 0x00090000 -h xxx.xxx.xxx.xxx /src/bzImage
> > 
> > My network connection is working, the ping to my host (working with Linux 
> > CentOS) is fine, the http server is activated.
> > I tried to change the order of the command parameters, nd also to load a 
> > file from a local disk; and checked thousand times my path.
> > I need your help, I must be missing something elementary.
> 
> This very much depends on your TFTP server.  Most are restricted
> to a particular directory [tree] for security reasons, so you aren't
> allowed to use a whole path name.  For example, on Red Hat (Fedora)
> systems, TFTP can only serve from the /tftpboot directory and that
> is implied in the path name, so the RedBoot command:
>   RedBoot> lo dir/file.test
> would come from /tftpboot/dir/file.test
> 
> You'll need to check the documentation on your TFTP server setup
> for the exact details.

Hi Gary

-m http

So there is no tftp server involved.

Philippe. Look at the logs of your web server. Is there any error?
Any such error might give you a clue as to what is wrong with the
path.

        Andrew

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss



More information about the Ecos-discuss mailing list