[ECOS] change default RedBoot "fis load" and "exec" - how?

Tomasz Chmielewski mangoo@wpkg.org
Mon Jul 10 12:12:00 GMT 2006

Gary Thomas wrote:

>> I compiled my own kernel, saved it to /dev/mtd2 (kern2), and boot it 
>> as follows:
>> RedBoot> fis load -b 0x00020000 kern2
>> RedBoot> exec
>> To do this, I have to ctrl+C when device boots, and type the 
>> appropriate "fis load..." and "exec" commands.
>> Is there an easy way to make these new "fis load..." and "exec" 
>> commands the default ones for RedBoot?
>> I don't have a JTAG pinout for this device, so I wouldn't like to 
>> compile RedBoot from scratch, then flash it, and possibly brick the 
>> device.
>> I checked RedBoot documentation, but didn't find any commands to just 
>> update the default startup commands.
> These commands are modified using the 'fconfig' command.

Thanks a lot, that was it!

Tomasz Chmielewski

Software deployment with Samba

Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

More information about the Ecos-discuss mailing list