[ECOS] How to?Loading Application using Network HUB

[Gary Thomas]

AbdullahKhateeb Khan wrote:
> im using a Windows based environment with a Pentium
> CPU as both Host and Target. Im trying to download the
> '.exe' file through the network hub but i havent been
> succesful with that 
>
> Can anyone help me out with the exact command sequence
> using 'load' command in RedBoot
>
> my HOST ip-address is 192.168.0.10 and my TARGET
> ip-address is 192.168.0.10
>
> 1- load -r -v -h 192.168.0.10 -m HTTP -c 1 -b
> 0x000a0000 hello.exe  
> 2- load -r -v -h 192.168.0.10 -m HTTP -c 1 -b
> 0x000a0000 hello.exe 
>
> On Boot Up RedBoot gives the following command on my
> Hyper Terminal console/display
>
> ----------------------------------------------------
> Ethernet eth0: MAC address 00:50:8b:0f:e8:34
> IP: 192.168.0.10/255.255.255.0, Gateway: 0.0.0.0
> Default server: 0.0.0.0, DNS server IP: 0.0.0.0
>
> RedBoot(tm) bootstrap and debug environment [FLOPPY]
> Non-certified release, version UNKNOWN - built
> 23:49:26, May 28 2006
>
> Platform: PC (I386)
> eCos based Embedded System.
>
> RAM: 0x00000000-0x000a0000, 0x0008ac10-0x000a0000
> available
> RedBoot>
> ----------------------------------------------------
> Can anyone help me out with the load command sequence
> using network load in RedBoot
>   
You've got the commands right - you just need to find the address of 
your TFTP server.  It
can't be the same as your target board's IP.

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss