[ECOS] There is a way to change a 'fconfig' redboot value froma linux program

thierry langlais thierry.langlais@efixo.com
Fri Apr 21 16:31:00 GMT 2006


It seems to be also the case when FIS and fconfig are not combined!

Here are traces from linux at boot
...
0x00fe0000-0x00fff000 : "FIS directory"
mtd: partition "FIS directory" doesn't end on an erase block -- force
read-only
0x00fff000-0x01000000 : "RedBoot config"
mtd: partition "RedBoot config" doesn't start on an erase block boundary
-- force read-only
...

Does someone know a way to use mdt-utils tools like fcp, unlock and
erase on a RedBoot config partition ?

Thanks,

Thierry.

Le mercredi 19 avril 2006 à 10:07 +0100, David Vrabel a écrit :
> Gary Thomas wrote:
> > 
> > In Linux, you could use MTD to access the 'fconfig' data.
> 
> Note that by default if you're using a combined FIS/fconfig block then
> both FIS and fconfig will be read-only from Linux.
> 
> David Vrabel


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss



More information about the Ecos-discuss mailing list