[ECOS] Problem with accept() on i386 pc.
Gary Thomas
gary@mlbassoc.com
Thu Apr 20 23:27:00 GMT 2006
On Thu, 2006-04-20 at 16:24 -0700, Patrick O'Grady wrote:
> server_test seems to have the same behavior--telnetting to 7734 doesn't
> connect. Interestingly though, tcp_lo_test passes.
You say you can ping it - is that *after* the application (yours or
'server_test') runs? or are you pinging RedBoot?
Perhaps there is a firewall or some other connectivity issue between
your host (where you are trying to telnet from) and the target.
>
> ----- Original Message -----
> From: "Gary Thomas" <gary@mlbassoc.com>
> To: "Patrick O'Grady" <patrick@baymotion.com>
> Cc: "eCos Discussion" <ecos-discuss@ecos.sourceware.org>
> Sent: Thursday, April 20, 2006 4:02 PM
> Subject: Re: [ECOS] Problem with accept() on i386 pc.
>
>
> > On Thu, 2006-04-20 at 15:30 -0700, Patrick O'Grady wrote:
> >> Hi, all--
> >>
> >> Curious if anyone else has seen this problem, or if I'm just doing
> >> something
> >> wrong. If I compile the following program on cygwin, then it works as
> >> expected: I can 'telnet localhost 7227' and see my server there.
> >> However,
> >> if I compile this program and run it on my i386 pc with an i82559
> >> ethernet
> >> adapter, it doesn't work. My target system is at IP address 10.4.0.73,
> >> and
> >> I can ping that with no problems. But if I 'telnet 10.4.0.73 7227', I
> >> get
> >> response SYN response packets with RST--implying that the port isn't
> >> listening. My target is configured using 'ecosconfig new pc net' with
> >> eCos
> >> from CVS as of today (4/20). I've not tried this program on eCos before;
> >> but if I undefine ECOS_MODE, then it compiles and works under Cygwin as
> >> expected. Thanks for your input!
> >
> > This looks very similar to the standard test "server_test". Have you
> > tried running it on your hardware?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
More information about the Ecos-discuss
mailing list