[ECOS] Redboot rebuild problem

[David Brennan]

I think you are asking for trouble using a path name with spaces.

Wang, Liu (Liu) wrote:
> Thanks Gary.
>
> I reinstall the eCos by doing CVS checking out.
> I got the same warnings with the command "$ ecosconfig new pid stubs".
> "ECOS_REPOSITORY" has been setup with "C:\Documents and
> Settings\liuwang\anonymousCVS\ecos\packages" where the "ecosconfig.exe"
> locates. I am using cygwin under Windows XP.
>
> ................
> ecos.db, package CYGPKG_HAL_POWERPC_CSB281: warning
>     This package does not have any valid version subdirectories.
> ecos.db, package CYGPKG_DEVS_FLASH_CSB281: warning
>     Version subdirectory `csb281' does not have a CDL script
> `flash_csb281.cdl'.
>
> ecos.db, package CYGPKG_DEVS_FLASH_CSB281: warning
>     Version subdirectory `csb281' does not have a CDL script
> `flash_csb281.cdl'.
>
> ecos.db, package CYGPKG_DEVS_FLASH_CSB281: warning
>     This package does not have any valid version subdirectories.
> ecos.db, package CYGPKG_DEVS_ETH_CSB281: warning
>     Version subdirectory `csb281' does not have a CDL script
> `csb281_eth_drivers
> .cdl'.
> ecos.db, package CYGPKG_DEVS_ETH_CSB281: warning
>     Version subdirectory `csb281' does not have a CDL script
> `csb281_eth_drivers
> .cdl'.
> ecos.db, package CYGPKG_DEVS_ETH_CSB281: warning
>     This package does not have any valid version subdirectories.
> ecos.db, package CYGPKG_HAL_POWERPC_TS1000: warning
>     Version subdirectory `ts1000' does not have a CDL script
> `hal_powerpc_ts1000
> .cdl'.
> ................
>
>
> Regards,
>
> Liu Wang
> Software/Firmware Engineer
> 10C-359B LVC
> 1110 American Pkwy, Allentown
> PA 18109, USA
> (610)712-3472(o)
> liuwang@agere.com
>
>
>
>
> -----Original Message-----
> From: Gary Thomas [mailto:gary@mlbassoc.com] 
> Sent: Tuesday, October 25, 2005 6:37 PM
> To: Wang, Liu (Liu)
> Cc: eCos Discussion
> Subject: Re: [ECOS] Redboot rebuild problem
>
>
> On Tue, 2005-10-25 at 17:41 -0400, Wang, Liu (Liu) wrote:
>   
>> The following command "ecosconfig new se7751 reboot" in cygwin gives 
>> the following warnings.
>>
>> ...............
>> ecos.db, package CYGPKG_HAL: warning
>>     Version subdirectory `common' does not have a CDL script 
>> `hal.cdl'. ecos.db, package CYGPKG_HAL: warning
>>     This package does not have any valid version subdirectories. 
>> ecos.db, package CYGPKG_INFRA: warning
>>     Version subdirectory `infra' does not have a CDL script 
>> `infra.cdl'. ............... Hardware selection: warning
>>     The target specification lists a package `CYGPKG_HAL_SH' which is
>> not presen
>> t in the component repository.
>> Hardware selection: warning
>>     The target specification lists a package `CYGPKG_HAL_SH_SH4' which
>> is not pr
>> esent in the component repository.
>> Hardware selection: warning
>>     The target specification lists a package
>> `CYGPKG_HAL_SH_SH7751_SE7751' which
>>  is not present in the component repository.
>> ...............
>>
>> File 'ecos.db" has been changed by adding "/v2_0/cdl" to all the 
>> directories of all packages. The first portion of the above warnings 
>> gone. The second portion of the above warning are still there.
>>
>> Your help will be highly appreciated in fixing the above warnings.
>>     
>
> Why are you messing with the paths (as you mention above)?
>
> I'd suggest that you just start by downloading the latest CVS tree and
> everything will just work.
>   http://ecos.sourceware.org/anoncvs.html
>
>   

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss