[ECOS] CQ7750
Raghu Bulusu
RBulusu@reptron.com
Mon May 30 15:13:00 GMT 2005
Gary,
Thanks for the reply, I did use grep earlier but all the statements
seem to define function HAL_STUB_PLATFORM_INIT() as hal_diag_led_on()or a
null function. It may sound like a basic 'C' question but I want to know
when statement '#ifdef HAL_STUB_PLATFORM_INIT' in the function
initHardware() is true?
Raghu
-----Original Message-----
From: Gary Thomas [mailto:gary@mlbassoc.com]
Sent: Friday, May 27, 2005 12:50 PM
To: Raghu Bulusu
Cc: eCos Discussion
Subject: Re: [ECOS] CQ7750
On Fri, 2005-05-27 at 12:43 -0400, Raghu Bulusu wrote:
> Hi,
>
> I tried modifying the Hal of SH/CQ7750 for a new board with SH7750
> processor. I am building the Redboot image using Ecos Configtool 2.0.
> I am trying to get the LED's on the board turn on and off to make sure
that
> the processor is reading from the flash. I know the LED's are turned on at
> this part of file hal_stub.c in the initHardware function
>
> #ifdef HAL_STUB_PLATFORM_INIT ----- ??
> // If the platform defines any initialization code, call it here.
> HAL_STUB_PLATFORM_INIT(); ----- this calls the led on function
> #endif
>
> where is HAL_STUB_PLATFORM_INIT defined??? in the packages/Hal/*
>
Did you try looking in the sources? A quick 'grep' shows where this is
defined (for each platform):
% find hal/sh -type f | xargs fgrep "HAL_STUB_PLATFORM_INIT("
hal/sh/cq7708/current/include/plf_stub.h:# define HAL_STUB_PLATFORM_INIT()
hal_diag_led_on()
hal/sh/cq7708/current/include/plf_stub.h:# define HAL_STUB_PLATFORM_INIT()
CYG_EMPTY_STATEMENT
hal/sh/cq7750/current/include/plf_stub.h:# define HAL_STUB_PLATFORM_INIT()
hal_diag_led_on()
hal/sh/cq7750/current/include/plf_stub.h:# define HAL_STUB_PLATFORM_INIT()
CYG_EMPTY_STATEMENT
hal/sh/dreamcast/current/include/plf_stub.h:# define
HAL_STUB_PLATFORM_INIT() hal_diag_led_on()
hal/sh/dreamcast/current/include/plf_stub.h:# define
HAL_STUB_PLATFORM_INIT() CYG_EMPTY_STATEMENT
hal/sh/edk7708/current/include/plf_stub.h:# define HAL_STUB_PLATFORM_INIT()
hal_diag_led_on()
hal/sh/edk7708/current/include/plf_stub.h:# define HAL_STUB_PLATFORM_INIT()
CYG_EMPTY_STATEMENT
hal/sh/hs7729pci/current/include/plf_stub.h:#define HAL_STUB_PLATFORM_INIT()
CYG_EMPTY_STATEMENT
hal/sh/se7751/current/include/plf_stub.h:#define HAL_STUB_PLATFORM_INIT()
CYG_EMPTY_STATEMENT
hal/sh/se77x9/current/include/plf_stub.h:#define HAL_STUB_PLATFORM_INIT()
CYG_EMPTY_STATEMENT
hal/sh/sh4_202_md/current/include/plf_stub.h:#define
HAL_STUB_PLATFORM_INIT() CYG_EMPTY_STATEMENT
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
Scanned by -- MCI Managed Email Content Service
Scanned by -- MCI Managed Email Content Service
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
More information about the Ecos-discuss
mailing list