[ECOS] Can redboot load wince
xxchen
xxchen@spherenet.co.jp
Fri Jan 21 03:59:00 GMT 2005
Thank you very much, Jerzy. It will do help me.
Best regards,
xxchen
>>
> I use different platform (custom board with IXP425 - based on IXDP425
> borad)
> so I can only describe my situation (probably help you). Wince kernel ( I
> think that because I had running version and my task was to port wince to
> boot sequence: eCos loader -> eboot.nk0 ->nk.nk0 or eCos loader ->
> nk.nk0) -
> nk.nb0 (nk.bin is a executable version, nk.nk0 is rom version) is prepared
> to
> start up direct from flash and I had to do:
> - switch off SDRAM configuration - redboot done that
> - switch off chip select - depends on what you need (extra hardware on
> board).
> - copy image to proper place - in wince are two constant ( I don't remeber
> name) 1 - address of eboot, 2 - offset beetwen eboot and kernel ( this
> constant are in ARM V ).
> Everything above was in startup routine.
> Last thing was connected with endian. Because core fetch instruction in
> big
> endian mode I must swap wince image to big endian.
>
> Best Regards,
> jerzy
>
>
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
More information about the Ecos-discuss
mailing list