[ECOS] support for AM29LV256M flash device
Mukund JB.
mukundjb@esntechnologies.co.in
Fri Feb 25 13:22:00 GMT 2005
Hello all,
I am working on cirrus logic BSP & using EBD19312 board. I am unable to
ping the device.
I have downloaded the redboot onto the board and redboot prompt appears
on my minicom. As I don't have a BOOTP on my network(cross cabled), I
have configured the IP using ip_address command of redboot.
The steps I followed are
1) Connected to the host through cross cable (Host running tftp server).
2) D/W the Redboot using serial cable.
3) executed the following command successfully
fis init -f
fconfig -i
ip_address -l 100.100.100.43 -h 100.100.100.13 ( NO DHCPd/
BOOTp)
After that, when I ping to HOST(100.100.100.13), it returns TIMED OUT.
I am using a Intel 82557/8/9 ( cat/proc/pci entry shown card). I am not
able to guess the problem.
It will be very helpful if u can help me out in this.
Regards,
Mukund jampala
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
More information about the Ecos-discuss
mailing list