[ECOS] RedBoot in Little Endian Mode

[Nickolay]

Hello Guys!

I has IXDP425 board, and should running her in Little Endian mode.
I download redboot BE and LE ROM image from Intel, but has some trouble 
with NPE network card working in LE mode.
In BE mode NPE cards work fine, but in LE mode network is not working 
correct.
BE image is writed successful on the flash and worked, but in LE image i 
swap words before writing to flash.

I set mac_address for npe_eth0: 00:30:30:30:30:30, configure npe_eth0 as 
primary network boot interface and run tcpdump
on host connected to same hub.
Then i reset board, and tcpdump show me strange result, instead my mac i 
see some other mac, and instead bootp protocol, i
see some other protocol(see below).
I think that is BE/LE mode trouble with NPE support in redboot from 
Intel. (Or i mistake and problem in something other?)

Maybe already exist native version RedBoot from ECOS with correct 
support NPE in Little Endian mode ?

root@nickolay:~# tcpdump -i eth0 -n
tcpdump: listening on eth0
20:52:11.267386 ff:ff:30:30:30:30 sap 08 > ff:ff:ff:ff:30:0 sap 00 I 
(s=0,r=0,C) len=324
20:52:12.266246 ff:ff:30:30:30:30 sap 08 > ff:ff:ff:ff:30:0 sap 00 rr 
(r=0,C) len=324
20:52:13.264500 ff:ff:30:30:30:30 sap 08 > ff:ff:ff:ff:30:0 sap 00 I 
(s=1,r=0,C) len=324
20:52:14.262734 ff:ff:30:30:30:30 sap 08 > ff:ff:ff:ff:30:0 sap 00 ui/C 
len=325
20:52:15.261902 ff:ff:30:30:30:30 sap 08 > ff:ff:ff:ff:30:0 sap 00 I 
(s=2,r=0,C) len=324
20:52:16.260151 ff:ff:30:30:30:30 sap 08 > ff:ff:ff:ff:30:0 sap 00 rnr 
(r=0,C) len=324
.... truncated....


Thank you!
--
Nickolay


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss