[ECOS] TCP Stack Testing problem

[Madhava Reddy S]

Hi Lunn,

Thanks for your valuble reply.
As you said i created a new project with i386 PC target and selected the net
option rather than the default in the template packages.
Next in the eCos HAL -  i386 architecture - i386 PC target I have selected
the startup type as Floppy.
In Basic networking - initialization options for eth0  I have selected the
Address setup for eth0.

Then i geneated the library and compiled the hello work program in
/ecos-2.0/examples.
Generated the bin of exe  i386-elf-objcopy -O binary nw_test nw_test.bin
copied ot floppy dd conv=sync if=nw_test.bin of=/dev/fd0
booted the target system.

>From the host i tried to ping to target using ping 192.168.1.2
It says dest unreachable.

Even i tried to connect using gdb i386-elf-gdb nw_test
(gdb)target remote 192.168.1.2:9000
It says No route to host.

In this case how can i test the working of ping to target.
I have intel 82559 card in the target system.

I want to do a ping from my host to target system.
If  you are aware with this please guid me.

Regards,
Madhava S

----- Original Message ----- 
From: "Andrew Lunn" <andrew@lunn.ch>
To: "Madhava Reddy S" <madhava.s@globaledgesoft.com>
Cc: "Andrew Lunn" <andrew@lunn.ch>; <ecos-discuss@ecos.sourceware.org>
Sent: Saturday, December 31, 2005 2:34 AM
Subject: Re: [ECOS] TCP Stack Testing problem


> On Fri, Dec 30, 2005 at 11:51:19PM +0530, Madhava Reddy S wrote:
>> Thanks a lot.
>>
>> I have tried to compile redboot code and tried to generate library but it
>> was giving lot of errors and warnings.
>>
>> I want to ping to target system.
>>
>> To do that is it compulsory to go for redboot support.Is there any other
>> way apart form redboot package selection.
>
> As i said in my reply, normal TCP/IP will work without Redboot.
>
>        Andrew
>
>>
>>
>> Regards,
>> Madhava S
>>
>> ----- Original Message ----- 
>> From: "Andrew Lunn" <andrew@lunn.ch>
>> To: "Madhava Reddy S" <madhava.s@globaledgesoft.com>
>> Cc: <ecos-discuss@ecos.sourceware.org>
>> Sent: Friday, December 30, 2005 8:37 PM
>> Subject: Re: [ECOS] TCP Stack Testing problem
>>
>>
>> >On Fri, Dec 30, 2005 at 07:36:02PM +0530, Madhava Reddy S wrote:
>> >>Hi All,
>> >>
>> >>I am new to eCos and currently learning to work on x86 PC platform.
>> >>
>> >>I want to test the working of TCP/IP stack.
>> >>
>> >>I was able to compile and run a sample application using boot floppy
>> >>through serial port.
>> >>
>> >>How can i test the same program using Ethernet port.
>> >>In the configuration tool i have selected "common ethernet support",
>> >>"networking" and "Open BSD Stack" packages.
>> >
>> >Rather than add packages like this, use the templates, eg net and
>> >old_net.
>> >
>> >>I have generated the library for my work_dir.
>> >>Then i have compiled the program using
>> >>i386-elf-gcc -g -I$(work_dir)/include/hello.c -L$(work_dir)/lib
>> >>-Ttarget.ld
>> >>-nostdlib -o nw_test
>> >>
>> >>Generated the binary of that exe
>> >>i386-elf-objcpy -O binary nw_test nw_test.bin
>> >>
>> >>copied to floppy
>> >>dd conv=sync if=nw_test.bin of=/dev/fd0
>> >>
>> >>I compiled the target for booting from floppy.
>> >>Started the target.
>> >>
>> >>On Host i started gdb
>> >>i386-elf-gdb nw_test
>> >>when i try to connect using "target remote ip:port"
>> >>it says destination unreachable.
>> >
>> >Only redboot contains a tcp/ip enabled stub which can be used by
>> >gdb. Your FLOPPY startup application only has a serial port gdb stub.
>> >This is not a problem though, normal TCP/IP will still work and you
>> >just need to use the serial port for gdb.
>> >
>> >Also, rather than writing your own test programs, i suggest you first
>> >use the eCos test programs. These are known to work. Enable
>> >CYGPKG_NET_BUILD_HW_TESTS and do a
>> >
>> >make tests
>> >
>> >and run the applications in install/tests/net/bsd_tcpip
>> >
>> >       Andrew
>> >
>> >-- 
>> >Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
>> >and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>> >
>>
>
>> This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended 
>> solely for the use of the addressee(s). If you are not the intended 
>> recipient, please notify the sender by e-mail and delete the original 
>> message.Global Edge Software Ltd has taken every reasonable precaution to 
>> minimize this risk, but is not liable for any damage you may sustain as a 
>> result of any virus in this e-mail. You should carry out your own virus 
>> checks before opening the e-mail or attachment. Global Edge Software Ltd 
>> reserves the right to monitor and review the content of all messages sent 
>> to or from this e-mail address
>
>
>
> -- 
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
> 

-------------- next part --------------
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message.Global Edge Software Ltd has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Global Edge Software Ltd reserves the right to monitor and review the content of all messages sent to or from this e-mail address

-------------- next part --------------
-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss