[ECOS] JFFS2 no space left on device error

[Edgar Grimberg]

Hello,

Thanks for the hints, Andrew.
One more thing I didn't specified, I have taken the mkfs.jffs2 from the 
CVS.

$ mkfs.jffs2 --version
mkfs.jffs2: revision 1.43

I did as you told me, as follows...

>You actually called it JFFS2 in FIS, not jffs2. I'm not sure if this
>matters.....
>  
>
RedBoot> fis list
Name              FLASH addr  Mem addr    Length      Entry point
RedBoot           0x01000000  0x01000000  0x00020000  0x00000000
appl              0x01020000  0x01020000  0x00030000  0x20007000
jffs2             0x010B0000  0x010B0000  0x00040000  0x20007000
FIS directory     0x013F0000  0x013F0000  0x0000F000  0x00000000
RedBoot config    0x013FF000  0x013FF000  0x00001000  0x00000000

I have changed the name of the jffs FIS image, but if the application 
can mount the JFFS2 file system, I am not sure it matters. Anyway, I am 
consistent with the ecos.ecc file.

>
>
>Err, actually yes it could be. To read the FIS directory is calls into
>Redboot. If you have stomped over redboot im supprised the test even
>runs. Looking at your FIS directory you have 0x01020000 - 0x10AFFFF
>free. Try linking jffs2_1 to run at that address and put Redboot back
>at 0x01000000.
>  
>
Did that, in the fis list command results above, you can see the appl 
image that contains the binary image of jffs2_1 test (made binary with  
arm-elf-objcopy ./jffs2_1 ./jffs2_1.bin -O binary and uploaded with 
RedBoot). I have stared the test with go 0x1020000 commmand in redboot, 
unfortunatly the same result.

>This does not seem right. There should be other entries. Try 
>
>jffs2dump -content ./jffs2.img
>
>and see if etc, passwd etc is in the image.
>
>  
>
It is not right, indeed...

$ ./jffs2dump --content /tftpboot/jffs2.img
         Dirent     node at 0x0000000c, totlen 0x0000002b, #pino     1, 
version     0, #ino         2, nsize        3, name CVS
         Inode      node at 0x00000038, totlen 0x00000044, #ino      2, 
version     1, isize        0, csize        0, dsize        0, 
offset        0
         Dirent     node at 0x0000007c, totlen 0x0000002d, #pino     1, 
version     1, #ino         3, nsize        5, name group
         Inode      node at 0x000000ac, totlen 0x0000013b, #ino      3, 
version     1, isize      445, csize      247, dsize      445, 
offset        0
         Dirent     node at 0x000001e8, totlen 0x0000002e, #pino     1, 
version     2, #ino         4, nsize        6, name passwd
         Inode      node at 0x00000218, totlen 0x0000019d, #ino      4, 
version     1, isize      658, csize      345, dsize      658, 
offset        0
         Dirent     node at 0x000003b8, totlen 0x0000002f, #pino     2, 
version     3, #ino         5, nsize        7, name Entries
         Inode      node at 0x000003e8, totlen 0x00000086, #ino      5, 
version     1, isize       85, csize       66, dsize       85, 
offset        0
         Dirent     node at 0x00000470, totlen 0x00000032, #pino     2, 
version     4, #ino         6, nsize       10, name Repository
         Inode      node at 0x000004a4, totlen 0x00000075, #ino      6, 
version     1, isize       49, csize       49, dsize       49, 
offset        0
         Dirent     node at 0x0000051c, totlen 0x0000002c, #pino     2, 
version     5, #ino         7, nsize        4, name Root
         Inode      node at 0x00000548, totlen 0x00000073, #ino      7, 
version     1, isize       47, csize       47, dsize       47, 
offset        0

Thanks for your patience,
Edgar

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss