[ECOS] flash_query throws an exception (Redboot_ROM version)

[Krishna Ganugapati]

Hi Mark,

Yes, I've kept the exact same settings for IXDP425_EXP_CS0_INIT


// CS0 (flash optimum timing)
#define IXP425_EXP_CS0_INIT \
 (EXP_ADDR_T(3) | EXP_SETUP_T(3) | EXP_STROBE_T(15) | EXP_HOLD_T(3) | \
  EXP_RECOVERY_T(15) | EXP_SZ_16M | EXP_WR_EN | EXP_BYTE_RD16 | EXP_CS_EN)

I'm going to start with a clean anon cvs installation and start over.

Thanks!

Krishna


-------------------------------------------------
----- Original Message ----- 
From: "Mark Salter" <msalter@redhat.com>
To: "Krishna Ganugapati" <krishnag@marakicorp.com>
Cc: <ecos-discuss@sources.redhat.com>
Sent: Monday, September 20, 2004 10:16 AM
Subject: Re: [ECOS] flash_query throws an exception (Redboot_ROM version)


> On Mon, 2004-09-20 at 12:33, Krishna Ganugapati wrote:
>> Hello Andrew.
>>
>> Thanks for the response.
>>
>> Yes 0x50000000 is the beginning of the FLASH - through gdb and through
>> BDI2000's telnet client, I can dump the flash at 0x50000000 and view the
>> contents.
>>
>
> This sounds like a bus configuration problem. I take it that this is
> a custom board. Is the EXP_WR_EN bit turned on for the CS0 config
> register?
>
> --Mark
> 


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss