[ECOS] EPXA10 Redboot problem

[Christian Mueller]

hi!

type of config: use the  REDBOOT macro, the actual startuptype you'll 
see in the configtool is rom
the flasher use is :

exc_flash_programmer.exe -g redboot.hex // you'll have to give the right path

if you did everything right, you will have a redboot.hex under redboot_install/bin, that is the one to flash

no re-linking etc is required..

chris

Clienti Christophe wrote:

>Hello,
>
>i would to put redboot on a EPXA10 rev 2.1 board.
>i succeed in compiling redboot with configtool but i would like to know how to 
>put the hex file into the flash memory :
>
>- What type of config : RAM, ROMRAM, REDBOOT ?
>- how burn the file with the exc_flash_programmer command line ?
>- Must have to re-link the redboot.hex (generated with conftool) with 
>arm-elf-ld or use arm-elf-objcopy ?
>
>thanks
>
>Christophe Clienti
>
>  
>


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss