[ECOS] [eb40]why i can not load file through redboot?
zhuyong
zhuyong0001@eyou.com
Wed Jun 2 06:58:00 GMT 2004
hi list,
I have one customed board based on AT91M40800(AT91X40),I download ecos
packages
from snapshot days earlier,I use templates EB40 and redboot,and i change
memory's
.ldi and .h file and change flash to my type.
problem)I have one worked redboot,I can use gdb remote debug my
file(uclinux.bin),but I can not use minicom to download file to ram,
I use command as follows:
+
RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version UNKNOWN - built 16:25:18, Jun 1 2004
Platform: Atmel AT91/EB40 (ARM7TDMI)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
RAM: 0x02000000-0x02200000, [0x02006c40-0x02200000] available
FLASH: 0x01000000 - 0x01100000, 16 blocks of 0x00010000 bytes each.
redboot> load -r -v -b 0x02020000 -m xmodem
and I choose xmodem and file(this file is uclinux.bin)
and I have this info:
Sending uclinux.bin,10121 blocks;Give your local XMODEM receive command now.
Xmodem sectors/kbytes sent: 0/0kRetry 0: Got 08 for sector ACK
Retry 0;Got 08 for sector ACK
......
Retry 0:NAK on sector
Retry 0:Got 0d for sector ACK
.....
what is my problem,i don't know.any advice will help me.
regards
zhuyong
--http://www.eyou.com
--Ãö¨¿Ã¿¿µÃµçÃÃÃÃ
Ãä ÃïÃôÃüþ Ãö¯Ãéé ÃÃÃú·þÃñ ÃøÃç´æ´¢...ÃÃÃÃô¾¡
--http://vip.eyou.com
--¿ì¿ìµÃüÃÃÃÃVIPÃÃ
Ãä â²áÃúÃÃÃâµÃÃÃȤÃû
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
More information about the Ecos-discuss
mailing list