[ECOS] X86 port

[Jonathan Larmour]

baljeet singh wrote:
> All,
> I have created the X86 (PC) target system with
> ecos2.0. One of the serial ports on the target
> platform is being used as diagnostic port for
> downloading the code etc. using Redboot and other
> diagnostic messages. I would like to use the other
> port of the target PC for connecting to a Hyper
> terminal to send data to the target board and send
> some responses back to test the serial port functions
> of the target board.
> Besides writing a test code to get/send data to the
> serial port, do I need to make any entries to DEVTAB
> or this is already done when the library is built.
> 
> How do I proceed with this?

Try changing CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL to 1 in your eCos 
config.

Jifl
-- 
eCosCentric    http://www.eCosCentric.com/    The eCos and RedBoot experts
 >>>>> Visit us in booth 2527 at the Embedded Systems Conference 2004 <<<<<
March 30 - April 1, San Francisco http://www.esconline.com/electronicaUSA/
--["No sense being pessimistic, it wouldn't work anyway"]-- Opinions==mine


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss