[ECOS] how to add ethernet support for SNDS
Hu Ying
ying_hu@alliedtelesyn.com
Fri Feb 20 06:56:00 GMT 2004
Thanks Jonathan,
I have another question. Does eCos have a CLI user interface? Since eCos
is still Linux-based, i think it should have a CLI like the one used in
linux. And so we can use some of the linux commands like 'ls, pwd, ....'.
Regards
Hu Ying
-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org]On Behalf Of Jonathan Larmour
Sent: Friday, February 20, 2004 12:47 PM
To: ying_hu@alliedtelesyn.com
Cc: 'eCos discussion'
Subject: Re: [ECOS] how to add ethernet support for SNDS
Hu Ying wrote:
> Hi Jonathan,
>
> I tried to build a redboot supporting ethernet from the "net" template.
>
> I chose the net template for SNDS100, add the "Samsung KS32C5000
> ethernet driver" and "RedBoot, the Red Hat bootstrap" packages. and I
> enable the "Behave as a ROM monitor" option in ecos HAL. The startup
> type is also set to "ROM".
This isn't right. To build redboot you need to start with the redboot
template. You should also then import the .ecm file in
hal/arm/snds/current/misc
However, just to be clear, do you know that someone still needs to port the
KS32C5000 driver to the SNDS platform? There's a bit of glue required
before it will work.
Jifl
--
eCosCentric http://www.eCosCentric.com/ The eCos and RedBoot experts
>>>>> Visit us in booth 2527 at the Embedded Systems Conference 2004 <<<<<
March 30 - April 1, San Francisco http://www.esconline.com/electronicaUSA/
--["No sense being pessimistic, it wouldn't work anyway"]-- Opinions==mine
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
More information about the Ecos-discuss
mailing list