[ECOS] using fconfig
Wed Aug 4 11:56:00 GMT 2004
I tried it and this compiled Redboot to be in such a way that it didn't
start at all.
Therefore, for me, it enforce the idea that the Flash driver seems to be
----- Original Message -----
From: "Gary Thomas" <email@example.com>
To: "David Lewin" <firstname.lastname@example.org>
Sent: Wednesday, August 04, 2004 12:28 PM
Subject: Re: [ECOS] using fconfig
> On Wed, 2004-08-04 at 03:28, David Lewin wrote:
> > The facts :
> > I'm workin in flash with an ARM processor.
> > the fis init is working ok, I can see
> > -Redboot
> > - Redboot config
> > - FIS directory
> > directories that have been created.
> > My question is :
> > what can make a fconfig -i crashing redboot[ROM] when I try
> > to create a new config ?
> > while debugging in RAM (insight & gdb dislike Flash debugging)
> > is ok to create my config.
> Check that the FLASH drivers you use are ROM-friendly. In other
> words, while you are writing to the FLASH, you can't be executing
> from it at the same time.
> Note: probably the easiest way around this is to run RedBoot
> in ROMRAM mode instead.
> Gary Thomas <email@example.com>
> MLB Associates
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
More information about the Ecos-discuss