[ECOS] PCI Ethernet card (ETH1 issue)

[Eric Doenges]

Michael Anburaj wrote:
> Hi,
> 
> Thanks to evenone.
> 
> I tried the ping_test & it works fine <After doing DHCP, it pings the 
> server & Also tried a bogus IP>. But when I tried the same test with the 
> same driver, change all reference to ETH0 --> ETH1 the ping_test -- gets 
> the IP address through DHCP & after that, while tring to ping --- it?s 
> hitting the ISR but not the DSR, so it fails. Any clues?

This only seems possible if CYGPKG_DEVS_ETH_RLTK_8139_SHARE_INTERRUPTS
is set and the interrupt is not for the 8139 in question. In all other
cases the standard generic ethernet DSR should be called.
-- 
--------------------------------------------------------------------
|     Eric Doenges              |     DynaPel Laboratories GmbH    |
|     Tel: +49 89 962428 23     |     Fraunhoferstrasse 9/2        |
|     Fax: +49 89 962428 90     |     D - 85737 Ismaning, Germany  |
--------------------------------------------------------------------


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss