[ECOS] EDB7312(ARM720T) interrupts

Aaron Case aaron.case@dynazign.com
Mon Nov 17 16:48:00 GMT 2003

inspection and a little pedantry

-----Original Message-----
From: Gary Thomas [mailto:gary@mlbassoc.com]
Sent: Monday, November 17, 2003 11:02 AM
To: Aaron Case
Cc: Andrew Lunn; Ecos-Discuss
Subject: RE: [ECOS] EDB7312(ARM720T) interrupts

On Mon, 2003-11-17 at 08:57, Aaron Case wrote:
> Hello,
> For purposes of updating the list I see now why it didnt work. I used the
> interrupt vector instead of the handle in the cyg_interrupt_attach() call.
> Refer to the bogus code I posted in the previous listing. Opps.

I'm curious how you found this?  by inspection?  did you try enabling

> thanks,
> Aaron Case
> -----Original Message-----
> From: Andrew Lunn [mailto:andrew@lunn.ch]
> Sent: Friday, November 14, 2003 5:13 PM
> To: Aaron Case
> Cc: Gary Thomas; Ecos-Discuss
> Subject: Re: [ECOS] EDB7312(ARM720T) interrupts
> On Fri, Nov 14, 2003 at 05:07:29PM -0500, Aaron Case wrote:
> > Gary,
> >
> > Many thanks, that cleared up my understanding of eCos interrupts a great
> > deal.  Although, I still cant seem to achieve software connectivity with
> the
> > eCos interrupt model.
> >
> > While testing my interrupt code I have observed that I can assert bits
> > the interrupt status register by sending characters to a UART. As well
> > enabling them with cyg_interrupt_unmask() call(see below).
> >
> > I, however, have not be able to get the ISR(and thus DSR) to execute(via
> > break points with my MAJIC ICE).
> >
> > In the case of the UART1 RX interrupt, I can send a character, verify
> > arrival at the buffer and FIFO, but no ISR or DSR is executed. Im
> > the problem is my software configuration(which is REALLY close to the
> Massa
> > text).  See code below.
> I don't see anywhere in your code where you program the serial chip to
> actually enable it to generate interrupts. Also, does eCos provide a
> serial driver for this chip? If so, that driver may already have the
> interrupt.
>         Andrew
Gary Thomas <gary@mlbassoc.com>
MLB Associates

Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss

More information about the Ecos-discuss mailing list