[ECOS] New problem with building eCos--see output

[Gary Thomas]

On Mon, 2003-11-10 at 20:32, Gregg C Levine wrote:
> Hello from Gregg C Levine
> It seems I am forever having problems with eCos. This time during the
> building of Red Boot, the build process gets interrupted when it needs
> to decide if the board in question will have any flash memory. (It
> will, I don't know how much.) That step stops it from continuing from
> building any form of Red Boot. Prior to the inclusion of the ECM file
> for building a redboot.bin binary, it worked and I could get a
> redboot.elf file built. I've put the output from the whole process
> below my signature. The usual rules apply.

What platform is this for?  How did you configure it?

What I can see from the dump you sent is that somehow you've enabled
the FLASH sub-system, but there are no FLASH drivers present.  This
is not supposed to happen, so I'd like to know the steps you took
to get here.

-- 
Gary Thomas <gary@mlbassoc.com>
MLB Associates


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss