[ECOS] fis free command

Gary Thomas gary@mlbassoc.com
Sat Nov 1 07:56:00 GMT 2003


Chris Garry said:
> I just re-built RedBoot and noticed a small problem with the fis free
> command. Output from RedBoot below:
>
> -- Begin --
> RedBoot(tm) bootstrap and debug environment [ROM]
> Non-certified release, version E7T-DBoard - built 16:51:24, Oct 31 2003
>
> Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
>
> RAM: 0x00000000-0x00080000, [0x00017cc8-0x0006f000] available
>      0x01900000-0x03900000, [0x01900000-0x03900000] available
> FLASH: 0x01800000 - 0x01880000, 128 blocks of 0x00001000 bytes each.
> RedBoot> fis free
>   0x0183B000 .. 0x0187E000
>   0x01880000 .. 0x0187FFFF
> RedBoot>
> -- End --
>
> The last line of output from the fis free command
> (0x01880000 .. 0x0187FFFF) is bogus since the highest FLASH address
> is 0x0187FFFF.
>
> Has this been seen on other platforms?

No.  What does 'fis list' show?

Note: 'fis free' has recently been changed to believe the values in
the fis directory.  If it is incorrect, then all bets are off.  A
configuration control can be used to restore the previous [dubious]
behaviour.



-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss



More information about the Ecos-discuss mailing list