[ECOS] Re: Problem using "go" command

Grant Edwards grante@visi.com
Fri Mar 14 20:19:00 GMT 2003


> > I am using 'Redboot.bin' as the boot loader for IXP-425. I am able to
> > download the 'zImage' as well as the 'ramdisk.gz' image to the
> > appropriate location. But once I type "go 0x11600000" command from the
> > Redboot prompt the system hangs.
> >
> > Can anyone suggest what could be the problem.

Make sure your console terminal is plugged into UART0 and not
UART1.  You can do RedBoot from either, but the Linux console
is only on UART0.

> I am not familiar with the RedBoot port to the IXP-425, but, most likely,
> you should use the "exec" command instead of the "go" command.  I am
> cross-posting this to ecos-discuss where, hopefully, somebody with
> experience with the IXP-425 can chime in.

I use "go" on the IXP-425 and it works just fine.

My bootscript looks like this:

RedBoot> fconfig -l
Run script at boot: true
Boot script: 
.. load -r -b 0x11600000 zImage
.. load -r -b 0x10800000 ramdisk.gz
.. go 0x11600000

-- 
Grant Edwards
grante@visi.com

-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss



More information about the Ecos-discuss mailing list