[ECOS] eCos tests

[Andrew Lunn]

I must admit that i've never done this. Im just working on what Martin
said.

Note that Martin does not say anything about configuring or building
newlib manually. In fact he says the gcc build will do it for you.

So, delete your newlib and unpack a clean version. Put in the symlinks
and then go through the gcc configuration and build process _without_
configuring newlib manually.

            Andrew

On Tue, Mar 11, 2003 at 11:53:44AM -0000, Paul M. Øverby wrote:
> Downloaded newlib through cvs, configured it, and built it. Set the symlinks
> as described in the post you linked me to. And rerun the gcc make with the
> added parameters "all-target-libstdc++-v3" and
> "install-target-libstdc++-v3".
> 
> Stopped right away with this error:
> 
> Configuring in arm-elf/newlib
> *** Cannot configure here in "/tmp/build/gcc/arm-elf/newlib" when
> "/src/gcc/gcc-3.2.2/newlib" is currently configured.
> make: *** [configure-target-newlib] Error 1
> 
> Must admit I don't understand much of this, so I guess I need another kick
> in the right direction.
> 
> Paul
> 
> ----- Original Message -----
> From: "Andrew Lunn" <andrew.lunn@ascom.ch>
> To: "Paul M. Øverby" <paul.magnar.overby@spagat.no>
> Cc: <ecos-discuss@sources.redhat.com>
> Sent: Monday, March 10, 2003 4:01 PM
> Subject: Re: [ECOS] eCos tests
> 
> 
> > On Mon, Mar 10, 2003 at 04:14:57PM -0000, Paul M. Øverby wrote:
> > > http://sources.redhat.com/ecos/tools/linux-arm-elf.html :
> >
> > These instructions are for the version of GCC recommended on that
> > page, ie 2.95.2.
> >
> > If you want to use gcc 3.x you need to do it a little different. This
> > has been discussed on the list before. eg:
> >
> > http://sources.redhat.com/ml/ecos-discuss/2002-11/msg00018.html
> >
> >         Andrew
> >
> 
> 

--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss