[ECOS] Re: Redboot i386 boot floppy won't boot on target
John Serson
john.serson@pobox.com
Thu Jun 12 06:50:00 GMT 2003
> I have installed the ecos book software and have regenerated the pc
> redboot.bin
> binary and transferred it to a floppy through cgywin 'dd' command. When
> trying
> to boot this floppy on the target pc the floppy light just stays on and
> nothing is
> displayed on the target PC screen. (no loading dots at all).
>
> PS: The preconfigured i386 pc downloaded redboot.bin transfers to the
> floppy okay
> with "dd" and will load on the target pc. It's problem is that it won't
> recognize the
> 82559 ethernet card.
>
> I presume that there is something missing in the configuration for the
> redboot.ecc
> that is not covered in the ecos book.
>
> Any tips or help will be grealy appreciated.
After redoing the redboot builds I got the floppy to boot on the target.
- the boot floppy light on and missing "....." problems were:
1) needed to delete the output redboot.bin and
redboot.elf files in the redboot_install directory before building
the new version. (or use the "clean" menu item in graphical
interface)
2) changed output floppy disk because the original output floppy
might have been bad
- the 82559 ethernet controller was not recognized
3) used a different Intel Pro/100+ controller (82559) with
Wake on Lan - it was recognized and it put out
"Intel Boot Agent 2.2" on the screen during boot.
(There must be several versions of Intel 82559
ethernet adapters).
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
More information about the Ecos-discuss
mailing list