[ECOS] hal tables in redboot...
Mathieu Bertrand
Bertrand@tcl.ite.mee.com
Wed Jun 11 13:20:00 GMT 2003
Hi to all,
I'm currently designing a redboot version in RAM for testing purpose on an
ixp2400 hardware.
I've encountered troubles with the use of hal tables defined in main.c as
follows:
CYG_HAL_TABLE_BEGIN( __RedBoot_INIT_TAB__, RedBoot_inits );
CYG_HAL_TABLE_END( __RedBoot_INIT_TAB_END__, RedBoot_inits );
CYG_HAL_TABLE_BEGIN( __RedBoot_CMD_TAB__, RedBoot_commands );
CYG_HAL_TABLE_END( __RedBoot_CMD_TAB_END__, RedBoot_commands );
not to mention the netdev tables defined in net_io.c.
CYG_HAL_TABLE_BEGIN( __NETDEVTAB__, netdev );
CYG_HAL_TABLE_END( __NETDEVTAB_END__, netdev );
My questions are the following:
1. How does it work and how do the RedBoot_cmd and RedBoot_init commands add
entries in __RedBoot_CMD_TAB__ and __RedBoot_INIT_TAB__ tables respectively
?
2. In my customized version, all these tables seem to be mapped at the same
address.
Furthermore, __RedBoot_INIT_TAB_END__ has always the same value as
__RedBoot_INIT_TAB__,
is it normal if entries are added ?
Any suggestions ?
Thanks for your attention.
Mathieu BERTRAND
MITSUBISHI ELECTRIC ITE-TCL |
1, allée de Beaulieu | tél: +33 (0)2 23 45 58 31
CS 10806 | fax: +33 (0)2 23 45 58 59
35708 RENNES cedex 7 | mailto:bertrand@tcl.ite.mee.com
France
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
More information about the Ecos-discuss
mailing list