[ECOS] Debugging using serial port

Nikhil R. nikhil_r@mindtree.com
Wed Feb 26 04:24:00 GMT 2003


No this not a newly built redboot. We have the eth driver for i82559 in
redboot.
With this redboot works fine over the net and we r able to load our
application using tftp.

Nikhil

-----Original Message-----
From: Jonathan Larmour [mailto:jifl@eCosCentric.com]
Sent: Tuesday, February 25, 2003 11:23 PM
To: Nikhil R.
Cc: ecos-discuss@sources.redhat.com
Subject: Re: [ECOS] Debugging using serial port


Nikhil R. wrote:
> Hi All,
> 
> We tried to debug an application thru the serial cable. We connected our
> i386-pc target's COM1 to our Linux host's COM1(/dev/ttyS0).
> 
> We have used i386-elf-gdb. We ran the commands:
> (gdb) set remotebaud 38400
> (gdb) target remote /dev/ttyS0
> 
> Remote debugging using /dev/ttyS0
> Remote packet too long: ..  |
> Ethernet recv:
> 000246FC: FF FF FF FF FF FF 00 09  6B C4 05 FE 08 00        |........k.....
[snip]

Is this a newly built redboot? You presumably have some eth driver 
included either in redboot or the application - which eth driver?

Does redboot work fine over the net normally?

Jifl
-- 
eCosCentric    http://www.eCosCentric.com/    The eCos and RedBoot experts
--[ "You can complain because roses have thorns, or you ]--
--[  can rejoice because thorns have roses." -Lincoln   ]-- Opinions==mine



DISCLAIMER:
This message (including attachment if any) is confidential and may be privileged. Before opening attachments please check them for viruses and defects. MindTree Consulting Private Limited (MindTree) will not be responsible for any viruses or defects or any forwarded attachments emanating either from within MindTree or outside. If you have received this message by mistake please notify the sender by return  e-mail and delete this message from your system. Any unauthorized use or dissemination of this message in whole or in part is strictly prohibited.  Please note that e-mails are susceptible to change and MindTree shall not be liable for any improper, untimely or incomplete transmission.

--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss



More information about the Ecos-discuss mailing list