[ECOS] MPC 860 reboot question.

Ottawa Guy ottawaguy81@yahoo.com
Thu Dec 4 18:16:00 GMT 2003


Thanks Gary,
Is there any way I could put a break point on the
exception. I am pretty sure the problem is either h/w
or some exception caused by my program. How do I know
what code caused this.
We am using our own proprietary board. 
               Ottawa 

--- Gary Thomas <gary@mlbassoc.com> wrote:
> On Thu, 2003-12-04 at 10:08, Ottawa Guy wrote:
> > Hi,
> > I have a general question for all the MPC860 user.
> > I have 860 board which is running Ecos. I am
> pumping
> > traffic into it, once in a while it just reboots.
> Is
> > there any common reboot module for 860. So that I
> > could put a  break point there and  investigate
> the
> > cause of the reboot. I am not sure where the
> reboot is
> > comming from h/w or s/w. Any suggestion would be
> > helpful.
> 
> Which 860 board?  What application are you running?
> 
> While eCos does define a HAL interface to reset a
> board, it's not 
> used by any of the standard kernel (drivers, etc). 
> My guess is that 
> you either have a hardware problem or are creating
> some sort of
> machine check condition (which may cause the
> processor to reset)
> 
> -- 
> Gary Thomas <gary@mlbassoc.com>
> MLB Associates
> 
> 
> -- 
> Before posting, please read the FAQ:
> http://sources.redhat.com/fom/ecos
> and search the list archive:
> http://sources.redhat.com/ml/ecos-discuss
> 


__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/

-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss



More information about the Ecos-discuss mailing list