[ECOS] iPaq 3600 - restore WinCE ?
Colin McPhail
mcphail_colin@hotmail.com
Fri Aug 15 20:19:00 GMT 2003
No, all I have is Parrot plus the 4 files on a PC. Thanks for the
suggestion ... I'll ask at the good people at handhelds.
Thanks,
-- CMcP
> >
> > In the course of investigating the redboot_WinCE version of redboot for
>iPaq
> > 3600 I seem to have rendered my iPaq somewhat unusable - a normal reboot
>or
> > cold start stops at Compaq's splash screen. The parrot loader still
>works,
> > and I have (on my PC) the contents of flash in four 4MB files that I
>saved
> > using OSloader before starting with redboot. Can anyone (please!) point
>me
> > to some instructions on how to use the parrot and these files to restore
> > WinCE? The only instructions I can find seem to assume that I have
>already
> > installed Linux, or at least its boot loader.
> >
> > (I know, I should have found out what to do *before* getting into this
> > situation .....).
> >
>
>Do you have RedBoot working from ROM? If so, and you can load and
>run a RAM version, I could provide you with a raw 16MB dump obtained
>from my machine. I have successfully restored my iPAQ to a "factory"
>condition using this file. Contact me directly if you want to try this.
>
>Alternatively, you could ask the folks that probably know. Look for
>help at http://www.handhelds.org/
>
>Note: the way I found to save your iPAQ is to get into the Parrot
>loader *before* loading anything else. Then install a CF RAM card
>and it will let you dump the contents of ROM/FLASH to it. Later
>on, you can use this to restore the original contents.
>
>--
>Gary Thomas <gary@mlbassoc.com>
>MLB Associates
>
_________________________________________________________________
Find a cheaper internet access deal - choose one to suit you.
http://www.msn.co.uk/internetaccess
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
More information about the Ecos-discuss
mailing list