[ECOS] Re: checksum error

Bob Koninckx bob.koninckx@mech.kuleuven.ac.be
Sun Nov 17 00:57:00 GMT 2002


Yes that is logical. What I meant is that you have to run the fconfig
command as soon as you get to the redboot prompt.

Make sure that you change something (you can later change it back) so
that redboot will update its configuration in the flash.

HAve also a look at ...

http://sources.redhat.com/ecos/docs-latest/redboot/persistent-state-flash.html

Bob

On Sat, 2002-11-16 at 20:24, Michael Lodman wrote:
> This error occurs before I ever get to the redboot prompt.
> 
> - Mike
> 
> ----- Original Message ----- 
> From: "Bob Koninckx" <bob.koninckx@mech.kuleuven.ac.be>
> To: "Michael Lodman" <jlodman@rainbow-networks.com>
> Sent: Saturday, November 16, 2002 11:00 AM
> Subject: Re: [ECOS] Re: checksum error
> 
> 
> > if I am not mistaking, it just means that you never ran the fconfig
> > commmand. After you've done this from the redboot prompt and save the
> > configuration to flash, the error should be gone.
> > 
> > Hth
> > 
> > Bob
> > 
> > On Sat, 2002-11-16 at 19:52, Michael Lodman wrote:
> > > I'm getting the error:
> > > 
> > > +FLASH configuration checksum error or invalid key
> > > 
> > > Can someone please explain this error and what I can do about it? I've
> > > completely erased the flash and reloaded and it is still there.
> > > 
> > > 
> > > -- 
> > > Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> > > and search the list archive: http://sources.redhat.com/ml/ecos-discuss
> > -- 
> > ----------------------------------------------------------------------
> > ir. Bob Koninckx
> > Katholieke Universiteit Leuven
> > Division Production Engineering,                   tel.  +32 16 322535
> > Machine Design and Automation                      fax.  +32 16 322987
> > Celestijnenlaan 300B                  bob.koninckx@mech.kuleuven.ac.be
> > B-3001 Leuven Belgium               http://www.mech.kuleuven.ac.be/pma
> > ----------------------------------------------------------------------
> > 
> > 
-- 
----------------------------------------------------------------------
ir. Bob Koninckx
Katholieke Universiteit Leuven
Division Production Engineering,                   tel.  +32 16 322535
Machine Design and Automation                      fax.  +32 16 322987
Celestijnenlaan 300B                  bob.koninckx@mech.kuleuven.ac.be
B-3001 Leuven Belgium               http://www.mech.kuleuven.ac.be/pma
----------------------------------------------------------------------


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss



More information about the Ecos-discuss mailing list