[ECOS] Porting trouble

[Carles Perello]

On Mon, 2002-05-27 at 10:00, Christer Kaivo-oja wrote:

> 
> Well, there is a JTAG port, but I can't use the ADS MutiICE on it for some 
> reason.. And also, the jtag cable I built using schematics from the board 
> manufacturer didn't work either (about 1 week of constant failure... ), so I 
> gave up on that and reverted back to the installed programming link...

Its easy to build one, you just need 100 ohm resistors and a 25 pin
parallel to JTAG header. 

Download the JFlash utility from Intel site or a Linux adapted version
from ftp://ftp.arm.linux.org.uk/pub/armlinux/people/nico/

Find out the ID codes of the IC's wich from the boundary scan chain.

hope this helps

carles


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss