[ECOS] Redboot Image download via Network...

Robert Cragie rcc@jennic.com
Wed Feb 13 07:25:00 GMT 2002


Just edit the file 'ecos.ecc' (which is a text file) in the top level of
your build tree using any text editor. Search for the string
"CYGDAT_REDBOOT_DEFAULT_IP_ADDR", and adjust the entry to look something
like the following, replacing "99, 99, 98, 30" with the IP address of your
choice in that format (e.g. "192, 168, 1, 1").

# Default IP address
# This IP address is the default used by RedBoot if a BOOTP/DHCP
# server does not respond. The numbers should be separated by
# *commas*, and not dots. If an IP address is configured into
# the Flash configuration, that will be used in preference.
#
cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
    # Flavor: booldata
    user_value 1 "99, 99, 98, 30"
    # value_source user
    # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 :  "0, 0, 0, 0"
    #     CYGSEM_REDBOOT_FLASH_CONFIG == 0
    #   --> 1 "0, 0, 0, 0"
};

> -----Original Message-----
> From: venkatesh [mailto:venkatc@in.ceeyes.com]
> Sent: 13 February 2002 14:43
> To: Robert Cragie
> Cc: ecos-discuss@sources.redhat.com
> Subject: Re: [ECOS] Redboot Image download via Network...
>
>
> Sir,
> I am not able to edit the option CYGDAT_REDBOOT_DEFAULT_IP_ADDR in my ecc.
> The option is desabled in the tool. How to enable the option?
> Kindly help in this regard.
>
> Thanks in Advance,
> Krishna Mohan
>
> ----- Original Message -----
> From: Robert Cragie <rcc@jennic.com>
> To: Jesper Skov <jskov@redhat.com>; venkatesh <venkatc@in.ceeyes.com>
> Cc: eCos Discuss <ecos-discuss@sources.redhat.com>
> Sent: Wednesday, February 13, 2002 7:51 PM
> Subject: RE: [ECOS] Redboot Image download via Network...
>
>
> > > On Wed, 2002-02-13 at 14:17, venkatesh wrote:
> > > > Sir,
> > > > I refered to the link specified by You, and there it is said to use
> the
> > > > command fconfig.
> > > > But, if I type help from the redboot prompt fconfig is not listed.
> > > > So where shall I use this fconfig.And also, How to configure
> > > the target to
> > > > use BOOTP?
> > >
> > > Right! You are using the PC target. It does not have flash, so there's
> > > no fconfig command.
> > >
> > > I must admit that I don't know if the IP can be static on the
> PC target
> > > in light of this. Anyone else know?
> >
> > Set the option CYGDAT_REDBOOT_DEFAULT_IP_ADDR in ecos.ecc to
> the static IP
> > address you want it to be. This works fine for me.
> >
> >
> >
>


Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss



More information about the Ecos-discuss mailing list