[ECOS] Redboot Baud Rate
Gary Thomas
gthomas@ecoscentric.com
Thu Aug 8 11:15:00 GMT 2002
On Thu, 2002-08-08 at 12:10, Craig Vanderborgh wrote:
> Hello All:
>
> Is it possible to change the baud rate for the Redboot serial console?
> I am running on an iPAQ H3760, and the baud rate is currently 38400.
> If I try to set it to 115200 using "fconfig", the new value is
> accepted, but never honored, even on reset. What's the deal?
> Is it not possible to set the baud rate to 115200?
Did you try the 'baud' command? I just tried it, using a
version I recently built, and it seemed to work fine:
RedBoot> bau
Baud rate = 38400
RedBoot> bau -b 115200
Baud rate will be changed to 115200 - update your settings
Switched terminal to run at 115200 here
Baud rate changed to 115200 - continue (y/n)? y
Update RedBoot non-volatile configuration - continue (y/n)? n
--
------------------------------------------------------------
Gary Thomas |
eCosCentric, Ltd. |
+1 (970) 229-1963 | eCos & RedBoot experts
gthomas@ecoscentric.com |
http://www.ecoscentric.com/ |
------------------------------------------------------------
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
More information about the Ecos-discuss
mailing list