[ECOS] can not get connected by gdb
Jonathan Larmour
jlarmour@redhat.com
Tue Apr 30 11:13:00 GMT 2002
joan_x wrote:
>
> Hi all:
> I use floppy to boot ecos up from x86 target,
> when boot, it displays this:
> ++$T0508:3c390000;04:e00f0000:#1c
> Does this mean the target has boot up?
> But after that I find the target halted, keyboard
> got no response when I hit it.
I take it this is a GDB stub image rather than a RedBoot image (as in, the
file you got it from wasn't called e.g redboot.bin).
> And at the host, I use gdb to connect it:
> set remotebaud 38400
> target remote /dev/ttyS1
>
> But not succeed,it shows:
> Ignoring package error(3 times)
> I don't know why. The serial cable is ok, I have
> used minicom to transfer, everything is ok.
>
>
> I have read the previous article on this mailing
> list, but didn't get answer.
I recommend using RedBoot, on the floppy instead (
http://sources.redhat.com/ecos/boards/redbootbins/x86pc/ ), and using the
anonymous CVS sources: http://sources.redhat.com/ecos/anoncvs.html
Note that the two go hand in hand together - don't use one without the
other.
Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
--[ "You can complain because roses have thorns, or you ]--
--[ can rejoice because thorns have roses." -Lincoln ]-- Opinions==mine
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
More information about the Ecos-discuss
mailing list