[ECOS] RedBoot for Assabet (strongarm) problem
Mon Nov 12 08:51:00 GMT 2001
>>>>> "Eric" == Eric BENARD / FREE <email@example.com> writes:
Eric> I tried to flash redboot.bin to my Assabet board using JFlash.
Eric> It flashs properly but nothing happens on the serial port even
Eric> after reseting the board.
I don't know the Assabet board, but if the flash is 16/32 bit wide,
this could be due to an endian issue (if so, there's probably an
option in the flash software to swap bytes before programming them
into the flash).
More information about the Ecos-discuss