[ECOS] Development board advice please
Christian Plessl
cplessl@ee.ethz.ch
Mon May 14 03:27:00 GMT 2001
Hi Roger
>We're just about to start development work for a prototype. We need to pick
>a development board to use in our prototype, so I'd like to ask for some
>advice based on your experience.
>We must have 2 PCI slots and 2 serial ports (gdb + serial console). We don't
>need much processing power (a few tens of MIPS would be ample), or memory
>and no networking is required. The board will be doing a lot of I/O via two
>PCI digital I/O cards. The priorities are then (starting with the most
>important):
When looking for a cheap devlopment board and you're not really affraid
from using x86 technology, you might consider using a MicroATX mainboard.
These Boards are really cheap and provide many interfaces you may need.
There are some nice boards providing onboard ethernet and so on too. Most
intel mainboard manufacturers do have MicroATX products for instance Asus,
Shuttle, Gigabyte and many more, see for instance:
http://www.spacewalker.com/english/product.htm
There is a bottomside of using these boards too, they are not really
intended to be used in deeply embedded applications, so there they do not
provide onboard flash memory to store your applications. But its possible
to connect a flash disk to the IDE connectors of course.
Best regards,
Christian
More information about the Ecos-discuss
mailing list