[ECOS] About real time clock problem

[John]

I have tested the twothreads.c example.
Both 2 threads hold on cyg_thread_delay(200) forever.

-----Original Message-----
From: Robin Farine [ mailto:acnrf@dial.eunet.ch ]
Sent: Friday, March 09, 2001 7:13 PM
To: ecos-discuss@sources.redhat.com
Subject: Re: [ECOS] About real time clock problem


Hi,

"John" <john@imining.com.tw> writes:

> Sorry I don't see the previous post in the digest, so I post it again.
> 
> I use default template to build an i386 pc target application.
> When I call cyg_thread_delay(2), the thead sleep forever.
> The scheduler timeslicing also dose not work.
> I find that the real time clock resolution is 1000000000/100.
> No matter what real time clock resolution I change (even 1/1), the problem is still the same.
> And the cyg_current_time() always return 0.
> Why?

Have you tried any test program using threads from the eCos distribution?
if yes then does it work?
    if yes then
        your own program probably has a bug
    else
        provide additional info (at least a small test program that
        illustrates the problem)
    fi
else
   please do it and go back to the start of this "eCos problem resolution
   algorithm"
fi

HTH,

Robin