[ECOS]standalone eCos & proc frequency

[Lewin A.R.W. Edwards]

Hi Andrea,

>1. In order to make a standalone eCos program that runs in flash whitout
>gdb,
>     I made the following steps:

I strongly suggest you delete your eCos build tree before rebuilding. I had 
similar problems, and they were eventually tracked down to un-cleaned-up 
leftovers in the build directories. Just move your ecos.ecc out, rm -rf *, 
move the ecos.ecc back in, and ecosconfig tree then make.

The procedure you describe is correct, so I'm pretty sure the above is your 
problem.

I don't know about your other question.

=== Lewin A.R.W. Edwards (Embedded Engineer)
Work: http://www.digi-frame.com/
Personal: http://www.zws.com/ and http://www.larwe.com/

"Und setzet ihr nicht das Leben ein,
Nie wird euch das Leben gewonnen sein."