[ECOS] Installing RedBoot into AT91EB40 board (write into FLASH memory))

[Gozman Florian Leonard]

Hi!

Thanks for previous reply.

I have a problem when I try to write into FLASH. The messages which
occur into minicom are:


RedBoot>load -m y -b 0x02040000   // select redboot_ROMRAM.srec file and
send it
cs range: 0x02000000-0x0200c53c
xyzModem - CRC mode, 1098(SOH)/0(STX)/0(CAN) packets, 11 retries
RedBoot>fis write -f 0x01010000 -b 0x02040000 -l 0xe000
* CAUTION * about to program FLASH at 0x01010000..0x0101dfff from
0x02040000 -  // block !!! if I pressed CR => RedBoot>

This message should be occur or not ?
After that, I press reset button on my board and nothing happens.
(Ofcourse the SW1 switch is "UPPER MEM").

Thanks!

Leonard





--

 Leonard