[ECOS] regarding EP7211

AshCan@aol.com AshCan@aol.com
Sun Oct 1 23:35:00 GMT 2000


I am using the 7212 board and Lauterbach's debugger.  Keep in mind that the 
RAM based build does not initialize the MMU, so the stub is still necessary.  
You will reset the board which executes the stub, which in turn initializes 
the MMU.  

If you later plan to build a ROM based program, the MMU configuration is in 
the C run-time environment entry code.

In a message dated 10/1/00 10:08:41 PM Pacific Daylight Time, 
d_iftikhar@hotmail.com writes:

> 
>    I am planning to build eCos for CIrrus Logic EP7211 board .
>  i went through the eCos documentation for that .
>  i am planning to use JEENI debugger with thet board . In the eCos 
>  documentation for target setup it is specified that we have to build GDB 
>  stubs to be loaded to the target .
>  If i use JEENI then do i still require to build GDB stubs ? In the eCOs 
>  documentation for MULTI ICE , they nowhere talk about building stubs .
>  Moreover in that case do i require to configure my kernel for RAM startup 
or 
> 
>  ROM startup ?
>  


More information about the Ecos-discuss mailing list