[ECOS] DBG Serial Init Problem with MBX based code
Jesper Skov
jskov@redhat.com
Thu Aug 31 23:57:00 GMT 2000
>>>>> "Ross" == Ross Wightman <rpw@velvet.microplex.com> writes:
Ross> Yup, it worked. The serial port gets initialized and GDB can
Ross> communicate with the board. Now I'm having issues loading
Ross> programs onto the board. No matter what baud rate I use (even
Ross> slowing it to 9600) the program download process downloads the
Ross> vectors at a good rate, then when it gets to .text the download
Ross> goes up in increments of 512bytes about every 30 seconds with
Ross> lots of packet error warnings in the gdb console. Sigh, the fun
Ross> never ceases.
Thanks, committed.
Sorry, no idea about the other problem. But try to force ASCII
download and enable debugging so you can see what's happening on the
line:
(gdb) set remotebinarydownload 0
(gdb) set remotedebug 1
If you see nothing weird, it could be a problem with the cable or the
board/PC connectors.
Also, you may want to try running GDB in CLI-mode (use -nx when
starting it) to see if that might make a difference (stranger things
have happened).
Jesper
More information about the Ecos-discuss
mailing list