From Stephen.Jeffrey@nrm.qld.gov.au Fri Sep 1 07:05:00 2006 From: Stephen.Jeffrey@nrm.qld.gov.au (Jeffrey Stephen) Date: Fri, 01 Sep 2006 07:05:00 -0000 Subject: xterm fails even when DISPLAY is set Message-ID: <66CE7F4ACF0C74439F9F6E0A5682930201BCCE2E@INDMAIL.lands.resnet.qg> Hi, I have just installed cygwin-1.5.19, and cannot open an xterm. I start the XWin server and the task manager shows that XWin.exe is running. When I type "xterm" on the command line nothing happens - no window appears and no error message is reported. The return status from the xterm command in 53. XWin is started as follows: $ export DISPLAY=127.0.0.1:0.0 $ /usr/X11R6/bin/startxwin.sh The output is shown below, and also the log file /tmp/XWin.log When I run xterm, nothing happens: $ xterm $ echo $? 53 When cygwin was installed I simply installed everything - I didn't attempt to do a customised install ie. omitting certain packages etc. However I have found that some utilities like "/usr/bin/less" and "/usr/bin/tbl" were missing, so I installed the "less" and "groff" packages. Maybe that indicates my install is not complete? I have tried the "twm" window manager and it too fails: $ twm twm: unable to open display "127.0.0.1:0.0" $ echo $DISPLAY 127.0.0.1:0.0 $ xhost + xhost: unable to open display "127.0.0.1:0.0" If I start XWin directly: $ /usr/X11R6/bin/XWin.exe I get a "Cygwin/X" window covering the entire screen, but I can't open any windows within it. It appears to be useless. Output from running this command is shown below. Running "startx" on the command line is also unsuccessful - when xterm is run nothing appears: $ export DISPLAY=127.0.0.1:0.0 $ startx Output from startx is shown below The installation added Cygwin entries to the Windows main menu. Under Cygwin there is a launcher for bash shell (which works) and under Cygwin-X there are sub-menus Editors, Information, Tools and Toys. These are all empty. I thought there should have been an "xterm" launcher somewhere in the Cywin menus. Does anyone have any suggestions as to what the problem could be? Regards steve ========================= Output from startxwin.sh ========================== Welcome to the XWin X Server Vendor: The Cygwin/X Project Release: 6.8.99.901-4 Contact: cygwin-xfree@cygwin.com XWin was started with the following command line: XWin -multiwindow -clipboard -silent-dup-error _XSERVTransmkdir: ERROR: euid != 0,directory /tmp/.X11-unix will not be created. /home/jeffreys> winValidateArgs - g_iNumScreens: 1 iMaxConsecutiveScreen: 1 (II) XF86Config is not supported (II) See h ttp://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information winDetectSupportedEngines - Windows NT/2000/XP winDetectSupportedEngines - DirectDraw installed winDetectSupportedEngines - DirectDraw4 installed winDetectSupportedEngines - Returning, supported engines 00000007 winSetEngine - Multi Window or Rootless => ShadowGDI winAdjustVideoModeShadowGDI - Using Windows display depth of 32 bits per pixel winAllocateFBShadowGDI - Creating DIB with width: 1280 height: 1024 depth: 32 winFinishScreenInitFB - Masks: 00ff0000 0000ff00 000000ff winInitVisualsShadowGDI - Masks 00ff0000 0000ff00 000000ff BPRGB 8 d 24 bpp 32 null screen fn ReparentWindow null screen fn RestackWindow InitQueue - Calling pthread_mutex_init InitQueue - pthread_mutex_init returned InitQueue - Calling pthread_cond_init InitQueue - pthread_cond_init returned winInitMultiWindowWM - Hello winInitMultiWindowWM - Calling pthread_mutex_lock () winMultiWindowXMsgProc - Hello winMultiWindowXMsgProc - Calling pthread_mutex_lock () MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shared memory support in the kernel (--) Setting autorepeat to delay=500, rate=31 (--) winConfigKeyboard - Layout: "00000409" (00000409) (--) Using preset keyboard for "English (USA)" (409), type "4" Rules = "xorg" Model = "pc105" Layout = "us" Variant = "(null)" Options = "(null)" (--) 3 mouse buttons found Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list! winPointerWarpCursor - Discarding first warp: 640 512 winInitMultiWindowWM - pthread_mutex_lock () returned. winInitMultiWindowWM - pthread_mutex_unlock () returned. winMultiWindowXMsgProc - pthread_mutex_lock () returned. winMultiWindowXMsgProc - pthread_mutex_unlock () returned. winMultiWindowXMsgProc - DISPLAY=127.0.0.1:0.0 winInitMultiWindowWM - DISPLAY=127.0.0.1:0.0 winProcEstablishConnection - Hello winInitClipboard () winClipboardProc - Hello DetectUnicodeSupport - Windows NT/2000/XP winClipboardProc - DISPLAY=127.0.0.1:0.0 winProcEstablishConnection - winInitClipboard returned. winMultiWindowXMsgProc - XOpenDisplay () returned and successfully opened the display. winInitMultiWindowWM - XOpenDisplay () returned and successfully opened the display. winClipboardProc - XOpenDisplay () returned and successfully opened the display. winProcSetSelectionOwner - Clipboard not yet started, aborting. winProcSetSelectionOwner - Clipboard not yet started, aborting. ========================= /tmp/XWin.log file ========================== $ cat /tmp/XWin.log _XSERVTransmkdir: ERROR: euid != 0,directory /tmp/.X11-unix will not be created. (II) XF86Config is not supported (II) See h ttp://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information winAdjustVideoModeShadowGDI - Using Windows display depth of 32 bits per pixel winAllocateFBShadowGDI - Creating DIB with width: 1280 height: 1024 depth: 32 winInitVisualsShadowGDI - Masks 00ff0000 0000ff00 000000ff BPRGB 8 d 24 bpp 32 null screen fn ReparentWindow null screen fn RestackWindow InitQueue - Calling pthread_mutex_init InitQueue - pthread_mutex_init returned InitQueue - Calling pthread_cond_init InitQueue - pthread_cond_init returned winInitMultiWindowWM - Hello winInitMultiWindowWM - Calling pthread_mutex_lock () winMultiWindowXMsgProc - Hello winMultiWindowXMsgProc - Calling pthread_mutex_lock () MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shared memory support in the kernel (--) Setting autorepeat to delay=500, rate=31 (--) winConfigKeyboard - Layout: "00000409" (00000409) (--) Using preset keyboard for "English (USA)" (409), type "4" (--) 3 mouse buttons found Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list! winInitMultiWindowWM - pthread_mutex_lock () returned. winInitMultiWindowWM - pthread_mutex_unlock () returned. winMultiWindowXMsgProc - pthread_mutex_lock () returned. winInitMultiWindowWM - DISPLAY=127.0.0.1:0.0 winMultiWindowXMsgProc - pthread_mutex_unlock () returned. winMultiWindowXMsgProc - DISPLAY=127.0.0.1:0.0 winProcEstablishConnection - Hello winInitClipboard () winClipboardProc - Hello DetectUnicodeSupport - Windows NT/2000/XP winClipboardProc - DISPLAY=127.0.0.1:0.0 winProcEstablishConnection - winInitClipboard returned. winInitMultiWindowWM - XOpenDisplay () returned and successfully opened the display. winMultiWindowXMsgProc - XOpenDisplay () returned and successfully opened the display. winClipboardProc - XOpenDisplay () returned and successfully opened the display. winProcSetSelectionOwner - Clipboard not yet started, aborting. ========================= Output from running /usr/X11R6/bin/XWin.exe directly on command line ========================== $ /usr/X11R6/bin/XWin.exe Welcome to the XWin X Server Vendor: The Cygwin/X Project Release: 6.8.99.901-4 Contact: cygwin-xfree@cygwin.com winInitializeDefaultScreens - w 1280 h 1024 winInitializeDefaultScreens - Returning _XSERVTransmkdir: Owner of /tmp/.X11-unix should be set to root XWin was started with the following command line: /usr/X11R6/bin/XWin winValidateArgs - g_iNumScreens: 1 iMaxConsecutiveScreen: 1 (II) XF86Config is not supported (II) See h ttp://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information winDetectSupportedEngines - Windows NT/2000/XP winDetectSupportedEngines - DirectDraw installed winDetectSupportedEngines - DirectDraw4 installed winDetectSupportedEngines - Returning, supported engines 00000007 winSetEngine - Using Shadow DirectDraw NonLocking winAdjustVideoModeShadowDDNL - Using Windows display depth of 32 bits per pixel winFinishScreenInitFB - Masks: 00ff0000 0000ff00 000000ff MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shared memory support in the kernel (--) Setting autorepeat to delay=500, rate=31 (--) winConfigKeyboard - Layout: "00000409" (00000409) (--) Using preset keyboard for "English (USA)" (409), type "4" Rules = "xorg" Model = "pc105" Layout = "us" Variant = "(null)" Options = "(null)" (--) 3 mouse buttons found Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list! winPointerWarpCursor - Discarding first warp: 637 481 Last 2 lines are output when the window is killed: FreeFontPath: FPE "/usr/X11R6/lib/X11/fonts/misc/" refcount is 2, should be 1; fixing. winDeinitMultiWindowWM - Noting shutdown in progress ========================= Output from running startx on command line ========================== $ export DISPLAY=127.0.0.1:0.0 $ startx Welcome to the XWin X Server Vendor: The Cygwin/X Project Release: 6.8.99.901-4 Contact: cygwin-xfree@cygwin.com XWin was started with the following command line: X :0 -multiwindow -clipboard _XSERVTransmkdir: Owner of /tmp/.X11-unix should be set to root winValidateArgs - g_iNumScreens: 1 iMaxConsecutiveScreen: 1 (II) XF86Config is not supported (II) See h ttp://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information winDetectSupportedEngines - Windows NT/2000/XP winDetectSupportedEngines - DirectDraw installed winDetectSupportedEngines - DirectDraw4 installed winDetectSupportedEngines - Returning, supported engines 00000007 winSetEngine - Multi Window or Rootless => ShadowGDI winAdjustVideoModeShadowGDI - Using Windows display depth of 32 bits per pixel winAllocateFBShadowGDI - Creating DIB with width: 1280 height: 1024 depth: 32 winFinishScreenInitFB - Masks: 00ff0000 0000ff00 000000ff winInitVisualsShadowGDI - Masks 00ff0000 0000ff00 000000ff BPRGB 8 d 24 bpp 32 null screen fn ReparentWindow null screen fn RestackWindow InitQueue - Calling pthread_mutex_init InitQueue - pthread_mutex_init returned InitQueue - Calling pthread_cond_init InitQueue - pthread_cond_init returned winInitMultiWindowWM - Hello winInitMultiWindowWM - Calling pthread_mutex_lock () winMultiWindowXMsgProc - Hello winMultiWindowXMsgProc - Calling pthread_mutex_lock () MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shared memory support in the kernel (--) Setting autorepeat to delay=500, rate=31 (--) winConfigKeyboard - Layout: "00000409" (00000409) (--) Using preset keyboard for "English (USA)" (409), type "4" Rules = "xorg" Model = "pc105" Layout = "us" Variant = "(null)" Options = "(null)" (--) 3 mouse buttons found Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list! winPointerWarpCursor - Discarding first warp: 640 512 winInitMultiWindowWM - pthread_mutex_lock () returned. winProcEstablishConnection - Hello ************************************************************************ The information in this e-mail together with any attachments is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any form of review, disclosure, modification, distribution and/or publication of this e-mail message is prohibited. If you have received this message in error, you are asked to inform the sender as quickly as possible and delete this message and any copies of this message from your computer and/or your computer system network. ************************************************************************ -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From faddag.safia1@laposte.net Fri Sep 1 11:57:00 2006 From: faddag.safia1@laposte.net (FEDDAG Safia) Date: Fri, 01 Sep 2006 11:57:00 -0000 Subject: salut c' est mon cher Message-ID: <20060901115620.A60B03B60B@burelor_sd1.ansm.net> Bonjour mon cher, Je me nommes FEDDAG Safia ,je suis de nationalit?? Alg??rienne et je vis en Irak . je suis dans ce pays depuis plus de 13 ans et j????tait au service de monsieur Nizar Hamboum . J??avais pour r??le de veiller sur le bon fonctionnement de la r??sidence ?? Moussoul et ?? m??occuper de tout ce qui est comme factures et charges a r??gler . J????tais en quelque sorte le majordome et j??avais connaissance de plusieurs choses que mon ma??tre faisait et ?? quoi il ??tait expos??. Monsieur Nizar avait occup?? plusieurs postes importants dans le pays et le monde entier. Il fut de 1993 ?? 1999, ambassadeur des nations unis a New York ;ministre des affaires ??trang??res et aussi d??put?? dans son pays. Il a ??t?? un membre influant dans la m??diation des relations entre les Etats Unis et l??Irak dans les ann??es 1980 . Il trouva la mort le vendredi 5 juillet 2003 ?? New York au centre comm??moratif de cancer de Sloan-Kettering des suite d??une crise cardiaque. Mon ma??tre m??avait demand?? de suivre le d??p??t dans une soci??t?? de surveillance et de conservation de biens priv??s, d??un colis c??est a dire une malle qui contenait la somme de 17.500.000 dollars $ (dix sept millions cinq cent milles dollars Am??ricains) .Il m??avait demand?? d??effectuer ce d??p??t ?? mon nom et lui en faire le rapport car il souhaitait une discr??tion et la s??curit?? pour son bien .Il m??a demand?? de codifi?? le colis comme ??tant un bien familial pour les raisons de s??curit?? de ce fond et pour ??viter de! s probl??mes avec le gouvernement .M??me la soci??t?? n??est pas inform??e du contenu du colis car le colis a ??t?? cod?? comme un bien familial et doncpriv??. Avant que la guerre n????clate , mon ma??tre m??a demand?? de prendre imm??diatement contact avec la soci??t?? afin de faire sortir le colis du pays car cette somme ??tait destin??e pour des investissements a l????tranger . Il souhaitait construire un h??tel en Arabie Saoudite . C??est apr??s des renseignements aupr??s de la soci??t?? qu??ils m??ont fait savoir qu??ils pouvaient faire mettre le colis dans un autre lieu mais cela se fera en Afrique ou se trouve leur base plus pr??cis??ment en Cote d??ivoire. J??ai remerci?? DIEU car pour moi cela ??tait mieux et ce pays n??est pas tr??s loin de mon pays l??Alg??rie et surtout il est en Afrique. Je viens vers vous pour solliciter votre aide afin de m??aider ?? retirer cette malle de ce pays et de m??aider ?? quitter l??Irak pour votre pays. Je voudrais que vous sachez que ce que je fais n??est connu de personne ni m??me de sa famille car longtemps j??ai ??t?? a leur service et sous ce r??gne barbare qu??offre ce pays et je n??ai rien eu comme garantiepour ma vie et je suis fatigu?? de vivre en esclave toute ma vie .Comme DIEU ne dort pas il a permit que ce bien soit en ma possession et que je sois la seul qui soit informer de son existence . Je voudrais que vous sachiez que l??aide que vous m??apporterez ne sera pas vain car j??ai pr??vu que pour votre aide vous recevrez 25% de la somme totale (17.500.000 $).Je d??tiens toutes les informations et les documents de l??existence de ce bien . Je voudrais que vous me fassiez savoir si vous souhaitez me venir en aide afin que je vous communiques les informations sur ce bien et la soci??t?? qui a la garde afin que vous entrez en contact avec eux pour qu??ils vous fassent parvenir le colis. Je voudrais que vous sachiez que c??est une soci??t?? diplomatique et en leur donnant une adresse s??r ils vous livrerons le colis .Sachez que le certificat de d??p??t ne porte pas de nom du b??n??ficiaire et qu??il sera facile pour vous de retirer ce colis car il suffira que vous vous pr??sentez commele b??n??ficiaire de ce colis. Je voudrais que tout ce que je vous ai dis restes secret afin de garantir ma s??curit?? et la s??curit?? de ce bien . Je n??ai aucune source de communications que l??ordinateur portable que j??ai dans la chambre donc je m??y contente. Pour plus de s??curit?? et de discr??tion je souhaiterais que vous me contactez sur mon adresse ??lectronique que voici : Merci de votre comprehension. FEDDAG Safia -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From papercrane@gmail.com Fri Sep 1 18:36:00 2006 From: papercrane@gmail.com (Justin Patrin) Date: Fri, 01 Sep 2006 18:36:00 -0000 Subject: xterm fails even when DISPLAY is set In-Reply-To: <66CE7F4ACF0C74439F9F6E0A5682930201BCCE2E@INDMAIL.lands.resnet.qg> References: <66CE7F4ACF0C74439F9F6E0A5682930201BCCE2E@INDMAIL.lands.resnet.qg> Message-ID: <432beae0609011135q35b73f30w5ee7e4a08c3fd17d@mail.gmail.com> On 9/1/06, Jeffrey Stephen wrote: > Hi, > > I have just installed cygwin-1.5.19, and cannot open an xterm. > > I start the XWin server and the task manager shows that XWin.exe is > running. When I type "xterm" on the command line nothing happens - no > window appears and no error message is reported. The return status from > the xterm command in 53. > > XWin is started as follows: > > $ export DISPLAY=127.0.0.1:0.0 > $ /usr/X11R6/bin/startxwin.sh > > The output is shown below, and also the log file /tmp/XWin.log > > When I run xterm, nothing happens: > > $ xterm > $ echo $? > 53 > DISPLAY needs to be set for the client programs, not for the X server. Try: $ export DISPLAY=:0 $ xterm -- Justin Patrin -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From KBarticle889459@aim.com Fri Sep 1 18:40:00 2006 From: KBarticle889459@aim.com (Charli Li) Date: Fri, 01 Sep 2006 18:40:00 -0000 Subject: xterm fails even when DISPLAY is set In-Reply-To: <432beae0609011135q35b73f30w5ee7e4a08c3fd17d@mail.gmail.com> References: <66CE7F4ACF0C74439F9F6E0A5682930201BCCE2E@INDMAIL.lands.resnet.qg> <432beae0609011135q35b73f30w5ee7e4a08c3fd17d@mail.gmail.com> Message-ID: <44F87F42.5080803@aim.com> A non-text attachment was scrubbed... Name: not available Type: application/pgp-encrypted Size: 11 bytes Desc: PGP/MIME version identification URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: encrypted.asc Type: application/octet-stream Size: 1925 bytes Desc: OpenPGP encrypted message URL: From duchovic@ipfw.edu Sat Sep 2 00:07:00 2006 From: duchovic@ipfw.edu (Ronald J. Duchovic) Date: Sat, 02 Sep 2006 00:07:00 -0000 Subject: Cygwin Error Message-ID: <6.2.5.6.2.20060901200111.0297da30@ipfw.edu> Dear Sir/Madame, Upon issuing the command startxwin.bat I receive an error message saying: "A fatal error has occurred and Cygwin/X will now exit. Please open /tmp/XWin.log for more information." But Cygwin does not exit. The log states: "Fatal server error. Cannot establish any listening sockets." Can you please help me understand this problem and make the appropriate correction? Thank you, Ron Duchovic Ronald J. Duchovic, Ph.D. Associate Professor of Chemistry Indiana University Purdue University Fort Wayne 260-481-6293 (Office) 260-481-6070 (FAX) -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From KBarticle889459@aim.com Sat Sep 2 00:12:00 2006 From: KBarticle889459@aim.com (Charli Li) Date: Sat, 02 Sep 2006 00:12:00 -0000 Subject: Cygwin Error In-Reply-To: <6.2.5.6.2.20060901200111.0297da30@ipfw.edu> References: <6.2.5.6.2.20060901200111.0297da30@ipfw.edu> Message-ID: <44F8CD19.7050004@aim.com> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Ronald J. Duchovic wrote: > Dear Sir/Madame, > > Upon issuing the command > > startxwin.bat > > I receive an error message saying: > > "A fatal error has occurred and Cygwin/X will now exit. > Please open /tmp/XWin.log for more information." > > But Cygwin does not exit. > > The log states: > > "Fatal server error. > Cannot establish any listening sockets." > > Can you please help me understand this problem and make the > appropriate correction? > > Thank you, > Ron Duchovic > > Ronald J. Duchovic, Ph.D. > Associate Professor of Chemistry > Indiana University Purdue University Fort Wayne > 260-481-6293 (Office) > 260-481-6070 (FAX) > > It seems like a firewall/virus scanner/security software issue. Try disabling them, and try again. And please, the next time you report a problem, remember: > Problem Reports: http://cygwin.com/problems.html - -- Charli - --- Why do you ask me? I don't even know who's thread this is! -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.1 (Cygwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFE+M0WKGyf4JaPChgRAgreAJ91Izfsg+LxX/M9dLCo/MecQ44/NwCdEU5K pCnbEUR8fmeBUpyBdydhqYo= =pZSR -----END PGP SIGNATURE----- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From r.berber@computer.org Sat Sep 2 01:21:00 2006 From: r.berber@computer.org (=?ISO-8859-1?Q?Ren=E9_Berber?=) Date: Sat, 02 Sep 2006 01:21:00 -0000 Subject: Cygwin Error In-Reply-To: <6.2.5.6.2.20060901200111.0297da30@ipfw.edu> References: <6.2.5.6.2.20060901200111.0297da30@ipfw.edu> Message-ID: Ronald J. Duchovic wrote: > Upon issuing the command > > startxwin.bat > > I receive an error message saying: > > "A fatal error has occurred and Cygwin/X will now exit. > Please open /tmp/XWin.log for more information." > > But Cygwin does not exit. What do you mean, the terminal doesn't close? that's normal, the process that will terminate (exit) is XWin which runs in the background. > The log states: > > "Fatal server error. > Cannot establish any listening sockets." > > Can you please help me understand this problem and make the > appropriate correction? Could be a permission problem, the user does not have the necessary permissions to open the required ports (this happens in Unix, I've never seen it in Cygwin). Is your user a member of the PowerUsers or Administrators group? What version of Windows are you using? -- Ren? Berber -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From gsmith@alumni.uwaterloo.ca Wed Sep 6 02:44:00 2006 From: gsmith@alumni.uwaterloo.ca (Greg Smith) Date: Wed, 06 Sep 2006 02:44:00 -0000 Subject: startx failure, on fresh install Message-ID: startx won't start X, after fresh install of latest cygwin on fresh XP laptop See previous report here: http://cygwin.com/ml/cygwin-xfree/2006-08/msg00099.html (no responses to that). I've found one other user with exactly the same problem, but have had no response in this forum or in the cybertechhelp forum where the other user posted, so I'm posting again. Currently, my options seem to be: (1) go buy another laptop, maybe cygwin-x will work on that one. I kind of like this one, though, everything else works on it. (2) attempt to 'downgrade' from 6.8.99 to 6.8.1 / 6.8.2 (there's a mix of these available on the mirrors); I've seen one report by a user who had success fixing a similar issue by this means. Is there anythng I should know before I try this? It seems that setup.exe will refuse to change all the X components at once, in particular the xorg-x11-base needs to be changed separately. Do I change it first, or last? My previous experience with this sort of thing makes me concerned that I'll irrevocably mess up my install if I do this wrong. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From KBarticle889459@aim.com Wed Sep 6 02:53:00 2006 From: KBarticle889459@aim.com (Charli Li) Date: Wed, 06 Sep 2006 02:53:00 -0000 Subject: startx failure, on fresh install In-Reply-To: References: Message-ID: <44FE38A9.1020203@aim.com> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 gsmith@alumni.uwaterloo.ca wrote: > > startx won't start X, after fresh install of latest cygwin on fresh XP > laptop > > See previous report here: > > http://cygwin.com/ml/cygwin-xfree/2006-08/msg00099.html > > (no responses to that). I've found one other user with exactly the same > problem, but have had no response in this forum or in the cybertechhelp > forum where the other user posted, so I'm posting again. > > Currently, my options seem to be: > (1) go buy another laptop, maybe cygwin-x will work on that one. I kind > of like this one, though, everything else works on it. > (2) attempt to 'downgrade' from 6.8.99 to 6.8.1 / 6.8.2 (there's a mix > of these available on the mirrors); I've seen one report by a user who > had success fixing a similar issue by this means. Is there anythng I > should know before I try this? It seems that setup.exe will refuse to > change all the X components at once, in particular the xorg-x11-base > needs to be changed separately. Do I change it first, or last? My > previous experience with this sort of thing makes me concerned that I'll > irrevocably mess up my install if I do this wrong. > > > > > > > You may want to use startxwin.sh or startxwin.bat, since there seems to be no evidence of anybody trying those methods yet. My experience is that I have tried startx and startxwin.sh, and they both don't work; the startxwin.bat file is the only one that worked for me. Try it out, and see what happens. And the next time you report a problem, you might want to read: > Problem reports: http://cygwin.com/problems.html - -- Charli - --- Step away from make 3.80. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.1 (Cygwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFE/jioKGyf4JaPChgRArr9AJ9HtplirygZ3XSRk+dJ1mTkvMG8CACfV+Ws tR2OcuqqzviXWwUAHkTkvI0= =T0eV -----END PGP SIGNATURE----- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From KBarticle889459@aim.com Wed Sep 6 02:54:00 2006 From: KBarticle889459@aim.com (Charli Li) Date: Wed, 06 Sep 2006 02:54:00 -0000 Subject: startx failure, on fresh install In-Reply-To: <44FE38A9.1020203@aim.com> References: <44FE38A9.1020203@aim.com> Message-ID: <44FE3917.4070502@aim.com> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Greg Smith wrote: >> startx won't start X, after fresh install of latest cygwin on fresh XP >> laptop > >> See previous report here: > >> http://cygwin.com/ml/cygwin-xfree/2006-08/msg00099.html > >> (no responses to that). I've found one other user with exactly the same >> problem, but have had no response in this forum or in the cybertechhelp >> forum where the other user posted, so I'm posting again. > >> Currently, my options seem to be: >> (1) go buy another laptop, maybe cygwin-x will work on that one. I kind >> of like this one, though, everything else works on it. >> (2) attempt to 'downgrade' from 6.8.99 to 6.8.1 / 6.8.2 (there's a mix >> of these available on the mirrors); I've seen one report by a user who >> had success fixing a similar issue by this means. Is there anythng I >> should know before I try this? It seems that setup.exe will refuse to >> change all the X components at once, in particular the xorg-x11-base >> needs to be changed separately. Do I change it first, or last? My >> previous experience with this sort of thing makes me concerned that I'll >> irrevocably mess up my install if I do this wrong. > > > > > > > > > > You may want to use startxwin.sh or startxwin.bat, since there seems to > be no evidence of anybody trying those methods yet. My experience is > that I have tried startx and startxwin.sh, and they both don't work; the > startxwin.bat file is the only one that worked for me. Try it out, and > see what happens. > > And the next time you report a problem, you might want to read: >> Problem reports: http://cygwin.com/problems.html > My apologies for the raw email address! :-( Charli -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.1 (Cygwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFE/jkWKGyf4JaPChgRAluUAJ4xWbsIN1mJDhx42RCkIgUODtQIBgCeL6+H E0fv0TOQzrwakIzLdGOp2L8= =Ivjt -----END PGP SIGNATURE----- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From gsmith@alumni.uwaterloo.ca Wed Sep 6 03:48:00 2006 From: gsmith@alumni.uwaterloo.ca (Greg Smith) Date: Wed, 06 Sep 2006 03:48:00 -0000 Subject: startx failure, on fresh install Message-ID: >You may want to use startxwin.sh or startxwin.bat, since there seems to >be no evidence of anybody trying those methods yet. My experience is >that I have tried startx and startxwin.sh, and they both don't work; the >startxwin.bat file is the only one that worked for me. Try it out, and >see what happens. Thank you for the response. startxwin.sh result seems identical to startx. startxwin.bat actually starts the server, but it's not viable: (1) run startxwin.bat in win command shell. X appears in sys tray. (2) "env DISPLAY=127.0.0.1:0.0 xclock & " in a cygwin shell: no window opens. (3) "env DISPLAY=127.0.0.1:0.0 xlogo &" in a cygwin shell: X window opens, but if you breathe on it, an error occurs (if you hit 'return' in the cygwin shell, or if you just alt-tab to the X window and back). Error message is Xlib: sequence lost (0x10000 > 0x32) in reply type 0x0! X Error of failed request: 0 Major opcode of failed request: 0 () Serial number of failed request: 0 Current serial number in output stream: 50 I can also run 'XWin -multiwindow' in a cygwin shell, and get a similarly flaky X session. > And the next time you report a problem, you might want to read: > Problem reports: http://cygwin.com/problems.html Well I did, actually; the full error dump is in the previous report that I linked to, and there's even more info (from another user with an identical problem) in a report linked to from there. I didn't think it was useful to replicate the full dump, I had no new information. And, re putting my full address in: no sweat, I get so much spam already at this address it's doubtful it will make any difference. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From phlip2005@gmail.com Wed Sep 6 10:04:00 2006 From: phlip2005@gmail.com (Phlip) Date: Wed, 06 Sep 2006 10:04:00 -0000 Subject: slow paints despite fast hardware In-Reply-To: <860c114f0608300727h4a1e50d3m5e9c8c42cc8e5e1b@mail.gmail.com> References: <860c114f0608262000p1bee6b75id4c3bb37e24217e4@mail.gmail.com> <20060828175420.69050.qmail@web30209.mail.mud.yahoo.com> <860c114f0608281129u10edb369vb96a54d7ebbab24d@mail.gmail.com> <860c114f0608300727h4a1e50d3m5e9c8c42cc8e5e1b@mail.gmail.com> Message-ID: <860c114f0609060304v44416ecahb4531ba5aec087eb@mail.gmail.com> Phlip wrote: > > Here are animations of the effect: > > > > http://www.zeroplayer.com/fastXterm.avi > > http://www.zeroplayer.com/slowKde.avi > > Just to finish the thread, turning compression on seems to have helped. > > ssh -X -C user@host > > I did not report that earlier because at first it did not work. The > above animations were collected after turning it on. I guess it took a > while to take effect! If I start X first (startx), then in another CygWin I ssh to the target machine, the system is slow. If I ssh to the target machine first, then startx, the system is fast. So this irritation is sufficiently worked-around, yet there's still something going on in there! > -- > Phlip > http://c2.com/cgi/wiki?ZeekLand <-- NOT a blog!! -- Phlip http://c2.com/cgi/wiki?ZeekLand <-- NOT a blog!! -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From knellis@syntek-usa.com Wed Sep 6 12:51:00 2006 From: knellis@syntek-usa.com (Kenneth Nellis) Date: Wed, 06 Sep 2006 12:51:00 -0000 Subject: startx failure, on fresh install In-Reply-To: Message-ID: <002501c6d1b2$e656a620$be32000a@idirect.net> FWIW, my X problems went away when I downgraded to the pre-6.8.99.901-1 versions of xorg-x11-* packages. Given my experience and others' reported problems on this list, I don't consider the "99" version stable. And, I understand that there is no one currently maintaining it. Maybe there was a better way of doing it, but with the inter- dependencies between the various X packages, it took me three (or four?) invocations of setup.exe to completely downgrade. I think there is little risk of irrevocably messing up your install. --Ken Nellis -----Original Message----- From: Greg Smith [mailto:gsmith at alumni dot uwaterloo dotca] Sent: Tuesday, September 05, 2006 10:45 PM To: cygwin-xfree at cygwin dotcom Subject: startx failure, on fresh install startx won't start X, after fresh install of latest cygwin on fresh XP laptop See previous report here: http://cygwin.com/ml/cygwin-xfree/2006-08/msg00099.html (no responses to that). I've found one other user with exactly the same problem, but have had no response in this forum or in the cybertechhelp forum where the other user posted, so I'm posting again. Currently, my options seem to be: (1) go buy another laptop, maybe cygwin-x will work on that one. I kind of like this one, though, everything else works on it. (2) attempt to 'downgrade' from 6.8.99 to 6.8.1 / 6.8.2 (there's a mix of these available on the mirrors); I've seen one report by a user who had success fixing a similar issue by this means. Is there anythng I should know before I try this? It seems that setup.exe will refuse to change all the X components at once, in particular the xorg-x11-base needs to be changed separately. Do I change it first, or last? My previous experience with this sort of thing makes me concerned that I'll irrevocably mess up my install if I do this wrong. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From stapleton.41@osu.edu Wed Sep 6 13:09:00 2006 From: stapleton.41@osu.edu (S James S Stapleton) Date: Wed, 06 Sep 2006 13:09:00 -0000 Subject: xfree issues on cygwin - that old cannot find font 'fixed' problem Message-ID: <001901c6d1b5$aa8beb20$4df39280@oitlan.oit.ohiostate.edu> I can get it working - I did before, but not before tomorrow, and I was hoping to get it fixed today. I have the problems with the cannot find font 'fixed'. I tried the stuff in the FAQ, but the directory didn't not appear in the mount list (nor any directory below it except "/"). I could not manually mount it, mount complained /usr/X11R6/lib/X11/fonts was invalid). The font dir does show up, and the misc subdir has 446 entries. Yesterday, I had my notebook with me, which runs FreeBSD, and I just tar'ed and copied over my fonts directory, untar'ed it, and the problem was solved. Sadly, I left my notebook at home, and yesterdays attempt at installing KDE under cygwin broke cygwin bad enough I had to reinstall. Any suggestions on getting this fixed today? Did I do something wrong with the mount procedure? Since I saw this in mailing list archives, yes I am running in windows linebreak mode. Thanks, -Jim Stapleton -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From mlabrot@hegemony.com Wed Sep 6 18:53:00 2006 From: mlabrot@hegemony.com (Michael A. LaBrot) Date: Wed, 06 Sep 2006 18:53:00 -0000 Subject: Cygwin X fails to start In-Reply-To: <200609052200.k85LxxYa021597@flpvm23.prodigy.net> References: <200609052200.k85LxxYa021597@flpvm23.prodigy.net> Message-ID: <44FF1905.3090207@hegemony.com> I, too, experienced the "could not open default font 'fixed'" problem and the FAQ did not help me either. I was able to run X after changing the Cygwin "Default Text File Type" from "DOS/text" to "Unix/binary" during setup. Consider this a bug report. ______________________________ "Javier Delgadillo" wrote: All, I've been trying to install Cygwin X on a Win XP machine for the last 2 days and can't get it to work. I've done google searches for possible solutions but the posts I've found seem outdated and no longer apply. This appears to be a problem with the "could not open default font 'fixed'" error message. All of the posts I've seen regarding this imply there is a problem with the mounts, but I've got 2 other installs here that do not mount the /usr/X11R6/lib/X11/fonts directory. So I'm not sure if those errors still apply. I'm not sure what to try next as the instructions here http://x.cygwin.com/docs/faq/cygwin-x-faq.html#q-error-font-eof don't seem to solve the problem for me. Any help would be greatly appreciated. Here is my /tmp/XWin.log: Vendor: The Cygwin/X Project Release: 6.8.99.901-4 Contact: cygwin-xfree@cygwin.com XWin was started with the following command line: XWin -multiwindow -clipboard -silent-dup-error (WW) /tmp mounted int textmode _XSERVTransmkdir: ERROR: euid != 0,directory /tmp/.X11-unix will not be created. winValidateArgs - g_iNumScreens: 1 iMaxConsecutiveScreen: 1 (II) XF86Config is not supported (II) See http://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information winDetectSupportedEngines - Windows NT/2000/XP winDetectSupportedEngines - DirectDraw installed winDetectSupportedEngines - DirectDraw4 installed winDetectSupportedEngines - Returning, supported engines 00000007 winSetEngine - Multi Window or Rootless => ShadowGDI winAdjustVideoModeShadowGDI - Using Windows display depth of 32 bits per pixel winAllocateFBShadowGDI - Creating DIB with width: 1024 height: 768 depth: 32 winFinishScreenInitFB - Masks: 00ff0000 0000ff00 000000ff winInitVisualsShadowGDI - Masks 00ff0000 0000ff00 000000ff BPRGB 8 d 24 bpp 32 null screen fn ReparentWindow null screen fn RestackWindow InitQueue - Calling pthread_mutex_init InitQueue - pthread_mutex_init returned InitQueue - Calling pthread_cond_init InitQueue - pthread_cond_init returned winInitMultiWindowWM - Hello winInitMultiWindowWM - Calling pthread_mutex_lock () winMultiWindowXMsgProc - Hello winMultiWindowXMsgProc - Calling pthread_mutex_lock () MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shared memory support in the kernel (--) Setting autorepeat to delay=500, rate=31 (--) winConfigKeyboard - Layout: "00000409" (00000409) (--) Using preset keyboard for "English (USA)" (409), type "4" Rules = "xorg" Model = "pc105" Layout = "us" Variant = "(null)" Options = "(null)" (--) 3 mouse buttons found Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list! Fatal server error: could not open default font 'fixed' -- Javier Delgadillo javi at javidel.org http://javidel.org/ -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From roac@matrixgeo.com Wed Sep 6 19:10:00 2006 From: roac@matrixgeo.com (Robert A. Campbell) Date: Wed, 06 Sep 2006 19:10:00 -0000 Subject: REPOST: XDMCP Problems In-Reply-To: <1156947900.21560.14.camel@zeus> References: <1156947900.21560.14.camel@zeus> Message-ID: <1157569807.4939.4.camel@localhost> I'm hoping somebody can give me a hand with this, I'm using the latest cygwin xfree, and have read the FAQ and tried everything in it with no success. On Wed, 2006-08-30 at 08:25 -0600, Robert Campbell wrote: > Hi all.... my first question to this forum so be gentle. > > I have two problems that seem to be related. > > I have a home LAN setup with two FC4 boxes. > > On the first FC4 box, I have setup XDMCP, and can connect to the XDMCP > via Xnest on the second box. > > This works: > Xnest :1 -query > > This tells me that XDMCP seems to be working properly on the first FC4 > machine. > > However, using cygwin/Xfree on an XP Pro notebook I cannot connect. > I continue to get the 'Too many retransmissions' message. > > I've tried the following combinations of commands: > Xwin -query > Xwin -query -from > > I have disabled completely the firewall on the XP Pro laptop, and have > no clue as to why it's not connecting. > > Curiously enough though, I can bring the same laptop into the office > connect it to the lan and use > Xwin -query > To start an XDMCP session to a Solaris 8 machine. > > The second question is related, it involves XDMCP from the same laptop > to the same sun machine over a VPN. > > Whenever I initialize an openvpn connection to the office, I can ping, > telnet, surf the local intranet, etc, etc. all over the vpn with no > difficulty. However, when I try to connect to the Solaris 8 host > via xdmcp, I get the "Too many retransmissions" error after a couple of > minutes. I've tried every set of Xwin command combinations I can think > of, with no success. > > Does anybody have any ideas ? > > > > -- > Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple > Problem reports: http://cygwin.com/problems.html > Documentation: http://x.cygwin.com/docs/ > FAQ: http://x.cygwin.com/docs/faq/ > > -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From eziokbysh@yahoo.com.cn Thu Sep 7 01:06:00 2006 From: eziokbysh@yahoo.com.cn (ITOCHU CORPORATION LIMITED) Date: Thu, 07 Sep 2006 01:06:00 -0000 Subject: BE OUR COMPANY REPRENSENTATIVE@! Message-ID: ITOCHU Corporation 5-1, Kita-Aoyama 2-chome Minato-ku, Tokyo 107-8077, Japan COMPANY REPRESENTATIVE REQUIRED I am Mr.Eizo Kobayashi. I represent ITOCHU CORPORATION LIMITED, based here in Japan. Our company exports cement, sugar and textile materials for world trade. We are searching for a representatives who can help us establish a medium of getting to our customers in Europe, America,and Canada as well as making payments through you as our payment officer. Most of our customers pay out in check and we do not have an account in your country that will clear this money. It is upon this note that we seek your assistance to stand in as our representative in your country. Note that, as our representative, you will receive 10% of whatever amount you clear for the company and the balance to be paid to us.If you are interested in this business transaction,forward to us the information below: FULL NAME: FULL CONTACT ADDRESS: PHONE: COUNTRY: STATE: AGE: OCCUPATION: POSITION HELD: NAME OF BANK: ANNUAL INCOME: CELL: FAX: These information should be forwarded to the President and Chief Executive Officer; Mr. Eizo Kobayashi E-MAIL eziokbysh@yahoo.com.cn Eizo Kobayashi President and Chief Executive Officer. Thank you for your time. Thanks in advance. Very Respectfully, Mr Eizo Kobayashi, Chief Executive Officer. Itochu Corporation Limited -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From andrew.macdonald@gmail.com Thu Sep 7 03:01:00 2006 From: andrew.macdonald@gmail.com (Andrew MacDonald) Date: Thu, 07 Sep 2006 03:01:00 -0000 Subject: could not open default font 'fixed' Message-ID: <67ce2b350609062001r29985a97o5aa56b27b158d413@mail.gmail.com> Hey, I'm sure you've all see this one posted on here before, but something has to be different because none of the solutions that I have found worked for me. I've checked mount points ensuring directories existed. I've re-installed font packages. I tried re-running the postinstall scripts. Yes, I have looked through the FAQ. I've also verfied that the font.alias file in /usr/X11R6/lib/X11/fonts/misc contained a 'fixed' alias. I took that and mapped it back to the actual .pcf.gz file an ensured it existed. As far as I can tell, everything looks perfectly normal. Except it won't start. Here is the XWin.log: ------------------------------ (WW) /tmp mounted int textmode _XSERVTransmkdir: ERROR: euid != 0,directory /tmp/.X11-unix will not be created. (II) XF86Config is not supported (II) See http://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information winAdjustVideoModeShadowGDI - Using Windows display depth of 16 bits per pixel winAllocateFBShadowGDI - Creating DIB with width: 1024 height: 768 depth: 16 winInitVisualsShadowGDI - Masks 0000f800 000007e0 0000001f BPRGB 6 d 16 bpp 16 null screen fn ReparentWindow null screen fn RestackWindow InitQueue - Calling pthread_mutex_init InitQueue - pthread_mutex_init returned InitQueue - Calling pthread_cond_init InitQueue - pthread_cond_init returned winInitMultiWindowWM - Hello winMultiWindowXMsgProc - Hello winInitMultiWindowWM - Calling pthread_mutex_lock () winMultiWindowXMsgProc - Calling pthread_mutex_lock () MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shared memory support in the kernel (--) Setting autorepeat to delay=500, rate=31 (--) winConfigKeyboard - Layout: "00000409" (00000409) (--) Using preset keyboard for "English (USA)" (409), type "4" (--) 3 mouse buttons found Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list! Fatal server error: could not open default font 'fixed' winDeinitMultiWindowWM - Noting shutdown in progress Locating the 'fixed' font: ---------------------------------- amacdona@amac /usr/X11R6/lib/X11/fonts/misc $ grep ^fixed fonts.alias fixed -misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-iso8859-1 >From fonts.dir (I wasn't sure how to grep for -misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-iso8859-1, but trust me it's there) 6x13-ISO8859-1.pcf.gz -misc-fixed-medium-r-semicondensed--13-120-75-75-c-60-iso8859-1 amacdona@amac /usr/X11R6/lib/X11/fonts/misc $ ls 6x13-ISO8859-1.pcf.gz 6x13-ISO8859-1.pcf.gz I checked the cygwin setup.exe to see what version of X I had installed. Is there any issues with this particular version? I have 6.8.99.901-1 for all the X packages. Well the ones that I have installed. If anyone can help, it'd be much appreciated. Andrew -- "When I do good, I feel good; when I do bad, I feel bad, and that is my religion." - Abraham Lincoln "Things could always be worse; for instance, you could be ugly and work in the Post Office - Adrienne E. Gusoff -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From reply-to-list-only-lh-x@cygwin.com Thu Sep 7 05:37:00 2006 From: reply-to-list-only-lh-x@cygwin.com (Larry Hall (Cygwin X)) Date: Thu, 07 Sep 2006 05:37:00 -0000 Subject: could not open default font 'fixed' In-Reply-To: <67ce2b350609062001r29985a97o5aa56b27b158d413@mail.gmail.com> References: <67ce2b350609062001r29985a97o5aa56b27b158d413@mail.gmail.com> Message-ID: <44FFAFF5.8080300@cygwin.com> Andrew MacDonald wrote: > Hey, > > I'm sure you've all see this one posted on here before, but something > has to be different because none of the solutions that I have found > worked for me. > > I've checked mount points ensuring directories existed. I've > re-installed font packages. I tried re-running the postinstall > scripts. Yes, I have looked through the FAQ. > > I've also verfied that the font.alias file in > /usr/X11R6/lib/X11/fonts/misc contained a 'fixed' alias. I took that > and mapped it back to the actual .pcf.gz file an ensured it existed. > As far as I can tell, everything looks perfectly normal. > > Except it won't start. > > Here is the XWin.log: > > > I checked the cygwin setup.exe to see what version of X I had > installed. Is there any issues with this particular version? I have > 6.8.99.901-1 for all the X packages. Well the ones that I have > installed. > > If anyone can help, it'd be much appreciated. > Andrew You didn't mention whether during your re-install whether you made sure the directory the fonts were going into were binary mounted. If this wasn't the case, try again with a binary mounted directory. -- Larry Hall http://www.rfk.com RFK Partners, Inc. (508) 893-9779 - RFK Office 216 Dalton Rd. (508) 893-9889 - FAX Holliston, MA 01746 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From s_g_brown@aapt.net.au Thu Sep 7 13:37:00 2006 From: s_g_brown@aapt.net.au (Stephen Grant Brown) Date: Thu, 07 Sep 2006 13:37:00 -0000 Subject: Starting XServer Message-ID: <000c01c6d277$5ffaa200$0100a8c0@JIREH> Dear Sir/Madam I am having trouble starting the cygwin xfree server. I was running cygwin in e:/cygwin I deleted this via the setup program I installed cygwin in c:/cygwin. At this stage XServer was working but not bash. I went back into setup and reinstalled bash. Bash now works. XServerver throws up the following log file (WW) /tmp mounted int textmode _XSERVTransmkdir: Owner of /tmp/.X11-unix should be set to root (II) XF86Config is not supported (II) See http://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information winAdjustVideoModeShadowGDI - Using Windows display depth of 32 bits per pixel winAllocateFBShadowGDI - Creating DIB with width: 1152 height: 864 depth: 32 winInitVisualsShadowGDI - Masks 00ff0000 0000ff00 000000ff BPRGB 8 d 24 bpp 32 null screen fn ReparentWindow null screen fn RestackWindow InitQueue - Calling pthread_mutex_init InitQueue - pthread_mutex_init returned InitQueue - Calling pthread_cond_init InitQueue - pthread_cond_init returned winInitMultiWindowWM - Hello winMultiWindowXMsgProc - Hello winInitMultiWindowWM - Calling pthread_mutex_lock () winMultiWindowXMsgProc - Calling pthread_mutex_lock () MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shar ed memory support in the kernel (--) Setting autorepeat to delay=500, rate=31 (--) winConfigKeyboard - Layout: "00000409" (00000409) (--) Using preset keyboard for "English (USA)" (409), type "4" (--) 3 mouse buttons found Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from li st! Fatal server error: could not open default font 'fixed' winDeinitMultiWindowWM - Noting shutdown in progress ~ I then checked the font path. /usr/X11R6/lib/X11/fonts exists /usr/X11R6/lib/X11/fonts/CID does not exist. What do I do to fix this? Yours Sincerely Stephen Grant Brown -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From r.berber@computer.org Thu Sep 7 18:09:00 2006 From: r.berber@computer.org (=?ISO-8859-1?Q?Ren=E9_Berber?=) Date: Thu, 07 Sep 2006 18:09:00 -0000 Subject: Starting XServer In-Reply-To: <000c01c6d277$5ffaa200$0100a8c0@JIREH> References: <000c01c6d277$5ffaa200$0100a8c0@JIREH> Message-ID: Stephen Grant Brown wrote: > I am having trouble starting the cygwin xfree server. > I was running cygwin in e:/cygwin > I deleted this via the setup program > I installed cygwin in c:/cygwin. > At this stage XServer was working but not bash. > I went back into setup and reinstalled bash. > Bash now works. > XServerver throws up the following log file > > (WW) /tmp mounted int textmode [snip] > Fatal server error: > could not open default font 'fixed' > winDeinitMultiWindowWM - Noting shutdown in progress > > I then checked the font path. > /usr/X11R6/lib/X11/fonts exists > /usr/X11R6/lib/X11/fonts/CID does not exist. > What do I do to fix this? What's the output of running "mount -m" ? -- Ren? Berber -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ebb9@byu.net Sat Sep 9 15:12:00 2006 From: ebb9@byu.net (Eric Blake) Date: Sat, 09 Sep 2006 15:12:00 -0000 Subject: "cannot open display" In-Reply-To: <4502966C.7010002@sherna.demos.su> References: <4502966C.7010002@sherna.demos.su> Message-ID: <4502D9D4.90109@byu.net> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 According to Ogogon !!! on 9/9/2006 4:24 AM: > Good afternoon, colleagues! > > I have established CygWin to compile under Windows the program developed > in gcc. At compilation of console applications - all OK. All > applications, even rather complex, are started and work without remarks. > > However, any attempt to create the program with GTK+, leads to that at > their start there is a message "Gtk-WARNING **: cannot open display:". > At distribution kit CygWin there is a program gtk-demo.exe. Obviously, > it it is guaranteed it is compiled without mistakes. It is not started > and also writes "Gtk-WARNING **: cannot open display:". Then it is probably an X problem, and you asked the wrong list. Try cygwin-xfree; redirecting accordingly. > > My OS - WindowsXP Pro (Rus). What do I do incorrectly? Probably forgot to set up X. And also didn't follow these directions: > Problem reports: http://cygwin.com/problems.html Including the output of 'cygcheck -svr' as a text attachment would have told us what the real problem was. - -- Life is short - so eat dessert first! Eric Blake ebb9@byu.net -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.1 (Cygwin) Comment: Public key at home.comcast.net/~ericblake/eblake.gpg Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFAtnT84KuGfSFAYARAptMAJ9I6SZIelcwaaVdsNbFw/WVdotYjACgxYbG emxh/luTjLE9VRQG193V2l8= =CuEC -----END PGP SIGNATURE----- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From jeffcook@uoregon.edu Sat Sep 9 20:49:00 2006 From: jeffcook@uoregon.edu (Jeff Cook) Date: Sat, 09 Sep 2006 20:49:00 -0000 Subject: XWin -silent-dup-error not so silent Message-ID: <3B3EBA81B0E5D646BE38BD42E7D157342244CF@JWJEXCH.jwj.uoregon.edu> Anybody have a work-around for this super-annoying problem? Jeff Cook IT Consultant 3 Facility Services University of Oregon XWin -silent-dup-error not so silent * From: "Kenneth Nellis" * To: * Date: Mon, 24 Jul 2006 15:50:19 -0400 * Subject: XWin -silent-dup-error not so silent * Reply-to: cygwin-xfree at cygwin dot com ________________________________________ I find it convenient to have a single icon in my Windows task bar that, when clicked, opens an xterm window without me having to know or care about whether or not Xserver is already running. My icon is associated with Cygwin's X11's standard startxwin.bat script that essentially runs the following two commands (edited here for clarity): \cygwin\bin\run XWin -multiwindow -clipboard -silent-dup-error \cygwin\bin\run xterm -e /usr/bin/bash -l This script is designed to do what I want: The first command starts Xserver, which is smart enough to detect whether another instance is running and to die if it is. Its (undocumented) -silent-dup-error switch, no doubt, is supposed to cause Xserver to be silent about dying, which is what you want for this scenario. The second command, then, starts xterm in the presence of a single Xserver. This script has worked fine until I upgraded Xserver from 6.8.2.0-4 to 6.8.99.901-1. Now Xserver is rather unsilent in the presence of another instance, displaying a Windows alert box ("A fatal error has occurred and Cygwin/X will now exit..."; see attached) and creating a /tmp/XWin.log file. I was hoping to learn whether this behavior is considered a bug or not and, if it is, whether it's under consideration for a fix. BTW, this change was mentioned in two previous posts--by Chuck on 7/12 ("Xwin.log error") and by me on 7/17 ("fatal error with X Server 6.8.99.901-1")--but neither post illicited a satisfactory response. Please forgive me for making one additional attempt. --Ken Nellis Attached: cygcheck.out, XWinAlert.bmp Attachment: cygcheck.out Description: Binary data Attachment: XWinAlert.bmp Description: Windows bitmap -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ogogon@sherna.demos.su Sat Sep 9 22:03:00 2006 From: ogogon@sherna.demos.su (Ogogon !!!) Date: Sat, 09 Sep 2006 22:03:00 -0000 Subject: "cannot open display" Message-ID: <45033A12.904@sherna.demos.su> Good afternoon, colleagues! I have established CygWin to compile under Windows the program developed in gcc. At compilation of console applications - all OK. All applications, even rather complex, are started and work without remarks. However, any attempt to create the program with GTK+, leads to that at their start there is a message "Gtk-WARNING **: cannot open display:". At distribution kit CygWin there is a program gtk-demo.exe. Obviously, it it is guaranteed it is compiled without mistakes. It is not started and also writes "Gtk-WARNING **: cannot open display:". My OS - WindowsXP Pro (Rus). What do I do incorrectly? Yours faithfully, Ogogon. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From r.berber@computer.org Sat Sep 9 22:11:00 2006 From: r.berber@computer.org (=?ISO-8859-1?Q?Ren=E9_Berber?=) Date: Sat, 09 Sep 2006 22:11:00 -0000 Subject: XWin -silent-dup-error not so silent In-Reply-To: <3B3EBA81B0E5D646BE38BD42E7D157342244CF@JWJEXCH.jwj.uoregon.edu> References: <3B3EBA81B0E5D646BE38BD42E7D157342244CF@JWJEXCH.jwj.uoregon.edu> Message-ID: Jeff Cook wrote: > Anybody have a work-around for this super-annoying problem? I you are using a script like the sample sent by Kenneth, why not doing something simple as: PID=`ps -a | grep XWin | cut -d " " -f 6` if [ -z $PID ]; then \cygwin\bin\run XWin -multiwindow -clipboard -silent-dup-error fi \cygwin\bin\run xterm -e /usr/bin/bash -l You can also use pgrep in PID=... if you have it (makes that part clearer and more portable). -- Ren? Berber -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From reply-to-list-only-lh-x@cygwin.com Sun Sep 10 02:45:00 2006 From: reply-to-list-only-lh-x@cygwin.com (Larry Hall (Cygwin X)) Date: Sun, 10 Sep 2006 02:45:00 -0000 Subject: "cannot open display" In-Reply-To: <45033A12.904@sherna.demos.su> References: <45033A12.904@sherna.demos.su> Message-ID: <45037C20.50107@cygwin.com> Ogogon !!! wrote: > Good afternoon, colleagues! > > I have established CygWin to compile under Windows the program developed > in gcc. At compilation of console applications - all OK. All > applications, even rather complex, are started and work without remarks. > > However, any attempt to create the program with GTK+, leads to that at > their start there is a message "Gtk-WARNING **: cannot open display:". > At distribution kit CygWin there is a program gtk-demo.exe. Obviously, > it it is guaranteed it is compiled without mistakes. It is not started > and also writes "Gtk-WARNING **: cannot open display:". > > My OS - WindowsXP Pro (Rus). What do I do incorrectly? Forgot to read and follow the problem reporting guidelines? > Problem reports: http://cygwin.com/problems.html My WAG - you're not running the X-server. Run it and try again. If you don't have it, re-run 'setup.exe' and install all the X packages. Open a command prompt and type 'startxwin.bat' and return. Wait for the X-server to start (puts a little "X" in your task bar). Try again. -- Larry Hall http://www.rfk.com RFK Partners, Inc. (508) 893-9779 - RFK Office 216 Dalton Rd. (508) 893-9889 - FAX Holliston, MA 01746 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From lazanoff@nas.nasa.gov Tue Sep 12 01:09:00 2006 From: lazanoff@nas.nasa.gov (Art Lazanoff) Date: Tue, 12 Sep 2006 01:09:00 -0000 Subject: x-server fails to exit under xp64 Message-ID: <000001c6d607$f6228390$198b6381@nas.nasa.gov> Choosing the x-server exit option causes the server to go into a CPU loop (taskmgr shows 100% CPU time). Taskmgr can stop the process. Can successfully 'kill' the server from a bash shell. $ XWin -v Welcome to the XWin X Server Vendor: The Cygwin/X Project Release: 6.8.99.901-4 -rwxr-x---+ 1 Administrator Users 4078592 Oct 26 2005 XWin.exe Thanks, Art ************************************************************************ Art Lazanoff NASA Ames Research Center Senior Scientific Consultant Mail Stop 258-6 lazanoff@nas.nasa.gov (650) 604-1687 Moffett Field, CA 94035-1000 ************************************************************************ -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From gsmith@alumni.uwaterloo.ca Tue Sep 12 02:56:00 2006 From: gsmith@alumni.uwaterloo.ca (Greg Smith) Date: Tue, 12 Sep 2006 02:56:00 -0000 Subject: startx won't start X, after fresh recent install. Message-ID: ... startx won't start X, after fresh install of latest cygwin on fresh XP laptop. Still bashing head on wall. As previously suggested on this thread, I tried downgrading to 6.8.1/6.8.2 mix. Same problem. I even tried switching screen res to 1024x768 (since the only other person in the googleverse who's reporting the same error also has 1280x800 screen). Same problem. Error message below: (more info, see here: http://cygwin.com/ml/cygwin-xfree/2006-08/msg00099.html) Is it possible that this silly MAfee firewall is messing things up? XWin and xinit have been given permission to 'use the internet' many oaths ago, so no warnings are popping up now, but it still doesn't work. ... winMultiWindowXMsgProc - DISPLAY=127.0.0.1:0.0 winMultiWindowXMsgProc - XOpenDisplay () returned and successfully opened the display. winInitMultiWindowWM - XOpenDisplay () returned and successfully opened the display. winClipboardProc - XOpenDisplay () returned and successfully opened the display. winProcSetSelectionOwner - Clipboard not yet started, aborting. winProcSetSelectionOwner - Clipboard not yet started, aborting. Xlib: sequence lost (0x10000 > 0x44) in reply type 0x0! X Error of failed request: 0 Major opcode of failed request: 0 () Serial number of failed request: 0 Current serial number in output stream: 68 waiting for X server to shut down winClipboardProc - Call to select () failed: -1. Bailing. winClipboardProc - XDestroyWindow succeeded. winDeinitMultiWindowWM - Noting shutdown in progress ============================================ $ systeminfo Host Name: GREGS-GTWY OS Name: Microsoft Windows XP Professional OS Version: 5.1.2600 Service Pack 2 Build 2600 OS Manufacturer: Microsoft Corporation OS Configuration: Standalone Workstation OS Build Type: Uniprocessor Free Registered Owner: Registered Organization: Product ID: 76487-OEM-0011903-00806 Original Install Date: 8/16/2006, 3:01:48 PM System Up Time: 8 Days, 13 Hours, 30 Minutes, 22 Seconds System Manufacturer: Gateway System Model: 7100 Series System type: X86-based PC Processor(s): 1 Processor(s) Installed. [01]: x86 Family 15 Model 36 Stepping 2 AuthenticAMD ~787 Mhz BIOS Version: PTLTD - 6040000 Windows Directory: C:\WINDOWS System Directory: C:\WINDOWS\system32 Boot Device: \Device\HarddiskVolume1 System Locale: en-us;English (United States) Input Locale: en-us;English (United States) Time Zone: (GMT-05:00) Eastern Time (US & Canada) Total Physical Memory: 446 MB Available Physical Memory: 86 MB Virtual Memory: Max Size: 2,048 MB Virtual Memory: Available: 2,008 MB Virtual Memory: In Use: 40 MB Page File Location(s): C:\pagefile.sys Domain: WORKGROUP Logon Server: \\GREGS-GTWY Hotfix(s): 160 Hotfix(s) Installed. [01]: File 1 [02]: File 1 [03]: File 1 ... yada yada yada ... [158]: KB921398 - Update [159]: KB921883 - Update [160]: KB922616 - Update NetWork Card(s): 3 NIC(s) Installed. [01]: Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller Connection Name: Local Area Connection DHCP Enabled: Yes DHCP Server: 192.168.1.1 IP address(es) [01]: 192.168.1.101 [02]: Broadcom 802.11g Network Adapter Connection Name: Wireless Network Connection [03]: 1394 Net Adapter Connection Name: 1394 Connection DHCP Enabled: Yes DHCP Server: N/A IP address(es) ==== printenv $ printenv HOMEPATH=\Documents and Settings\Owner.YOUR-E9A2427FF4 MANPATH=/usr/local/man:/usr/share/man:/usr/man:/usr/local/man:/usr/share/man:/usr/man::/usr/ssl/man:/usr/ssl/man APPDATA=C:\Documents and Settings\Owner.YOUR-E9A2427FF4\Application Data HOSTNAME=GREGS-GTWY TERM=cygwin PROCESSOR_IDENTIFIER=x86 Family 15 Model 36 Stepping 2, AuthenticAMD WINDIR=C:\WINDOWS TEXDOCVIEW_txt=cygstart %s TEXDOCVIEW_dvi=cygstart %s OLDPWD=/usr/bin USERDOMAIN=GREGS-GTWY OS=Windows_NT ALLUSERSPROFILE=C:\Documents and Settings\All Users USER=Owner TEMP=/cygdrive/c/DOCUME~1/OWNER~1.YOU/LOCALS~1/Temp COMMONPROGRAMFILES=C:\Program Files\Common Files USERNAME=Owner TEXDOCVIEW_pdf=cygstart %s PROCESSOR_LEVEL=15 PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/usr/local/bin:/usr/bin:/usr/bin:/usr/X11R6/bin:/cygdrive/c/WINDOWS/system32:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/System32/Wbem:/cygdrive/c/Program Files/ATI Technologies/ATI Control Panel:/usr/lib/lapack FP_NO_HOST_CHECK=NO SYSTEMDRIVE=C: PWD=/home/Owner TEXDOCVIEW_html=cygstart %s USERPROFILE=C:\Documents and Settings\Owner.YOUR-E9A2427FF4 TEXDOCVIEW_HTML=cygstart %s CLIENTNAME=Console PS1=\[\e]0;\w\a\]\n\[\e[32m\]\u@\h \[\e[33m\]\w\[\e[0m\]\n\$ LOGONSERVER=\\GREGS-GTWY TEXDOCVIEW_TXT=cygstart %s TEXDOCVIEW_DVI=cygstart %s PROCESSOR_ARCHITECTURE=x86 !C:=C:\cygwin\bin SHLVL=2 HOME=/home/Owner PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH HOMEDRIVE=C: PROMPT=$P$G COMSPEC=C:\WINDOWS\system32\cmd.exe TMP=/cygdrive/c/DOCUME~1/OWNER~1.YOU/LOCALS~1/Temp SYSTEMROOT=C:\WINDOWS PROCESSOR_REVISION=2402 PRINTER=PDFCreator CVS_RSH=/bin/ssh TEXDOCVIEW_ps=cygstart %s TEXDOCVIEW_PS=cygstart %s MAKE_MODE=unix PROGRAMFILES=C:\Program Files INFOPATH=/usr/local/info:/usr/share/info:/usr/info:/usr/local/info:/usr/share/info:/usr/info: TEXDOCVIEW_PDF=cygstart %s NUMBER_OF_PROCESSORS=1 SESSIONNAME=Console COMPUTERNAME=GREGS-GTWY _=/usr/bin/printenv -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From kalle@tuulos.net Tue Sep 12 18:59:00 2006 From: kalle@tuulos.net (Kalle Tuulos) Date: Tue, 12 Sep 2006 18:59:00 -0000 Subject: XDMCP connection to (K)Ubuntu freezes Message-ID: <9fafbb7c0609121159q2c501049j9a631bc37f92fdac@mail.gmail.com> Hello. I have used Cygwin/X + XDMCP connection to Debian Linux computers in several Windows computers for several years, with no problems. However, I recently installed Kubuntu 6.0.6 to one computer and noticed that XDMCP connection freezes quite quickly. Symptoms are: - I get the login screen - I get the desktop - I can activate any program - after activating couple of windows, specially command shells, connection gets extremely slow and it eventually freezes - now when I try to close Cygwin/X, windows Task Manager just says "program is not responding" - the behaviour is exactly the same in two computers, both running Windows XP Pro SP2. If I just open X with "startx", take ssh connection to Kubuntu computer and run "anything" from there (including command shells), there are no problems whatsoever. So this error seems to be isolated in XDMCP or handling of the desktop. To be honest, I have not tested the exactly same Cygwin/X setup to any Debian machine in the last few days, as I don't currently have an access to any Debian machine, which would run X. But, it was working fine still a couple of months ago. Here is a reference to Ubuntu web forum about same problem: http://www.ubuntuforums.org/showthread.php?t=237132 The "cygcheck.out" is attached. Any help is appreciated. If you need, I can activate some switches in Xwin to produce log files you need. Thanks, Kalle Tuulos -------------- next part -------------- A non-text attachment was scrubbed... Name: cygcheck.out Type: application/octet-stream Size: 28754 bytes Desc: not available URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ifekonja@siol.net Wed Sep 13 11:52:00 2006 From: ifekonja@siol.net (Iztok) Date: Wed, 13 Sep 2006 11:52:00 -0000 Subject: XWIn.exe , compile Message-ID: <28291880.1158148341609.JavaMail.root@fep1> Hi; I would like to re-compile the XWin.exe in order to make some changes for multi_window mode; but I have a lot of troubles compiling the x-stuff; Could you tell me, where I could find the compile-process description ? thank you very much; best regards, Iztok Fekonja, Slovenia, EU -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Joe.Bruce.PSU@gmail.com Wed Sep 13 12:20:00 2006 From: Joe.Bruce.PSU@gmail.com (Joe Bruce) Date: Wed, 13 Sep 2006 12:20:00 -0000 Subject: Cygwin/X and emacs always hangs.. References: <4145AE6D.20703@xspace.com> Message-ID: Bram Kivenko xspace.com> writes: > Does anyone know anything about this? I use windows 2000, but I'm not > sure that matters. > I can only confirm that it affects Windows XP SP2 as well. I have been having the same problem (and now wish that I had not upgraded my Cygwin install). Joe -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Angelo.Graziosi@roma1.infn.it Wed Sep 13 14:23:00 2006 From: Angelo.Graziosi@roma1.infn.it (Angelo Graziosi) Date: Wed, 13 Sep 2006 14:23:00 -0000 Subject: Cygwin/X and emacs always hangs.. Message-ID: Joe Bruce wrote: > I can only confirm that it affects Windows XP SP2 as well. I have been > having the same problem (and now wish that I had not upgraded my Cygwin > install). Have you recently 'rebaseall' the system? I have had that Emacs hangs after a 'rebaseall'. The workaround was to reinstall libncurses7 package. Really, it needs only to reinstall the file : cygncurses7.dll. So a trick could be to save the non rebased version of cygncurses7.dll and the recopiyng it in /bin after the rebase. Cheers, Angelo. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Ian.Johnson@uwe.ac.uk Wed Sep 13 14:50:00 2006 From: Ian.Johnson@uwe.ac.uk (Ian Johnson) Date: Wed, 13 Sep 2006 14:50:00 -0000 Subject: Xwin crashes with clipboard enabled. Message-ID: <1158158606.2925.19.camel@emperor.cems.uwe.ac.uk> I've no idea how I've broken this, but a week ago everything was fine :) The only things I can think of that might have messed things up are installing the tinyos rpm/nesC/SDCC. If I start XWin -clipboard, everything appears to work until I start a shell, at which point it segV's. If I start XWin -multiwindow, everything works fine. If I start XWin -multiwindow -clipboard, it crashes If I run startxwin.sh, an xterm flashes up and it crashes. Attached cygcheck output, Xwin log & stackdump Any suggestions much appreciated Ian This email has been independently scanned for viruses and any virus software has been removed using McAfee anti-virus software -------------- next part -------------- A non-text attachment was scrubbed... Name: XWin.log Type: text/x-log Size: 2040 bytes Desc: not available URL: -------------- next part -------------- Exception: STATUS_ACCESS_VIOLATION at eip=01387A46 eax=01390798 ebx=01390650 ecx=013908BC edx=013908E4 esi=0000003F edi=013A000C ebp=0230C940 esp=0230C920 program=C:\cygwin\usr\X11R6\bin\Xwin.exe, pid 3620, thread select_socket cs=001B ds=0023 es=0023 fs=003B gs=0000 ss=0023 Stack trace: Frame Function Args 0230C940 01387A46 (01390650, 0230C9B8, 01385E91, 00000010) Stack trace: Frame Function Args 1018C434 01385EC0 (00000430, 00000000, 00000000, 00000000 134757 [select_socket] Xwin 3620 _cygtls::handle_exceptions: Error while dumping state (probably corrupted stack) -------------- next part -------------- Cygwin Configuration Diagnostics Current System Time: Wed Sep 13 15:05:01 2006 Windows XP Media Center Edition Ver 5.1 Build 2600 Service Pack 2 Path: C:\cygwin\usr\local\bin C:\cygwin\bin C:\cygwin\bin C:\cygwin\usr\X11R6\bin c:\WINDOWS\System32 c:\Program Files\ggobi c:\Program Files\SDCC\bin C:\cygwin\lib\lapack Output from C:\cygwin\bin\id.exe (nontsec) UID: 1005(irj) GID: 513(None) 0(root) 513(None) 544(Administrators) 545(Users) 1008(Debugger Users) Output from C:\cygwin\bin\id.exe (ntsec) UID: 1005(irj) GID: 513(None) 0(root) 513(None) 544(Administrators) 545(Users) 1008(Debugger Users) SysDir: C:\WINDOWS\system32 WinDir: C:\WINDOWS USER = 'irj' PWD = '/tmp' HOME = '/home/irj' MAKE_MODE = 'unix' HOMEPATH = '\Documents and Settings\irj' MANPATH = '/usr/local/man:/usr/share/man:/usr/man::/usr/ssl/man:/usr/share/qt3/doc/man:/usr/X11R6/man' APPDATA = 'C:\Documents and Settings\irj\Application Data' HOSTNAME = 'pingu' VS71COMNTOOLS = 'C:\Program Files\Microsoft Visual Studio .NET 2003\Common7\Tools\' TERM = 'cygwin' PROCESSOR_IDENTIFIER = 'x86 Family 6 Model 14 Stepping 8, GenuineIntel' WINDIR = 'C:\WINDOWS' TEXDOCVIEW_txt = 'cygstart %s' TEXDOCVIEW_dvi = 'cygstart %s' QTDIR = '/usr/lib/qt3' OLDPWD = '/home/irj' USERDOMAIN = 'PINGU' OS = 'Windows_NT' ALLUSERSPROFILE = 'C:\Documents and Settings\All Users' !:: = '::\' TEMP = '/cygdrive/c/DOCUME~1/irj/LOCALS~1/Temp' COMMONPROGRAMFILES = 'C:\Program Files\Common Files' LIB = 'C:\Program Files\Microsoft Visual Studio .NET 2003\SDK\v1.1\Lib\' GTK_BASEPATH = 'C:\GTK' QTJAVA = 'C:\Program Files\Java\jre1.5.0_07\lib\ext\QTJava.zip' USERNAME = 'irj' TEXDOCVIEW_pdf = 'cygstart %s' PROCESSOR_LEVEL = '6' FP_NO_HOST_CHECK = 'NO' SYSTEMDRIVE = 'C:' TEXDOCVIEW_html = 'cygstart %s' USERPROFILE = 'C:\Documents and Settings\irj' CLIENTNAME = 'Console' QMAKESPEC = '/usr/lib/qt3/mkspecs/cygwin-g++' PS1 = '\[\e]0;\w\a\]\n\[\e[32m\]\u@\h \[\e[33m\]\w\[\e[0m\]\n\$ ' LOGONSERVER = '\\PINGU' PROCESSOR_ARCHITECTURE = 'x86' !C: = 'C:\cygwin\bin' SHLVL = '1' PATHEXT = '.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH' HOMEDRIVE = 'C:' PROMPT = '$P$G' COMSPEC = 'C:\WINDOWS\system32\cmd.exe' TMP = '/cygdrive/c/DOCUME~1/irj/LOCALS~1/Temp' SYSTEMROOT = 'C:\WINDOWS' PRINTER = 'Fax' CVS_RSH = '/bin/ssh' PROCESSOR_REVISION = '0e08' CLASSPATH = '.;C:\Program Files\Java\jre1.5.0_07\lib\ext\QTJava.zip' PKG_CONFIG_PATH = '/usr/X11R6/lib/pkgconfig' TEXDOCVIEW_ps = 'cygstart %s' INFOPATH = '/usr/local/info:/usr/share/info:/usr/info:' PROGRAMFILES = 'C:\Program Files' DISPLAY = ':0' NUMBER_OF_PROCESSORS = '2' INCLUDE = 'C:\Program Files\Microsoft Visual Studio .NET 2003\SDK\v1.1\include\' SESSIONNAME = 'Console' VISIQUEST_ROOT = 'C:\VisiQuest' COMPUTERNAME = 'PINGU' SONICCENTRAL = 'C:\Program Files\Common Files\Sonic Shared\Sonic Central\' _ = '/usr/bin/cygcheck' POSIXLY_CORRECT = '1' HKEY_CURRENT_USER\Software\Cygnus Solutions HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2 HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\Program Options HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2 (default) = '/cygdrive' cygdrive flags = 0x00000022 HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/ (default) = 'C:\cygwin' flags = 0x0000000a HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/bin (default) = 'C:\cygwin/bin' flags = 0x0000000a HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/lib (default) = 'C:\cygwin/lib' flags = 0x0000000a HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\Program Options c: hd NTFS 50956Mb 66% CP CS UN PA FC d: cd N/A N/A z: net NTFS 71851Mb 32% CP CS PA irjohnso C:\cygwin / system binmode C:\cygwin/bin /usr/bin system binmode C:\cygwin/lib /usr/lib system binmode . /cygdrive system binmode,cygdrive Found: C:\cygwin\bin\awk.exe Found: C:\cygwin\bin\bash.exe Found: C:\cygwin\bin\cat.exe Found: C:\cygwin\bin\cp.exe Found: C:\cygwin\bin\cpp.exe Found: C:\cygwin\bin\crontab.exe Found: C:\cygwin\bin\find.exe Found: C:\cygwin\bin\gcc.exe Found: C:\cygwin\bin\gdb.exe Found: C:\cygwin\bin\grep.exe Found: C:\cygwin\bin\kill.exe Found: C:\cygwin\bin\ld.exe Found: C:\cygwin\bin\ls.exe Found: C:\cygwin\bin\make.exe Found: C:\cygwin\bin\mv.exe Found: C:\cygwin\bin\patch.exe Found: C:\cygwin\bin\perl.exe Found: C:\cygwin\bin\rm.exe Found: C:\cygwin\bin\sed.exe Found: C:\cygwin\bin\ssh.exe Found: C:\cygwin\bin\sh.exe Found: C:\cygwin\bin\tar.exe Found: C:\cygwin\bin\test.exe Not Found: vi Found: C:\cygwin\bin\vim.exe 80k 2006/02/20 C:\cygwin\bin\cygaa-1.dll - os=4.0 img=1.0 sys=4.0 "cygaa-1.dll" v0.0 ts=2006/2/20 21:16 25k 2005/08/15 C:\cygwin\bin\cygao-2.dll - os=4.0 img=1.0 sys=4.0 "cygao-2.dll" v0.0 ts=2005/8/15 10:22 91k 2005/11/11 C:\cygwin\bin\cygapr-0-0.dll - os=4.0 img=1.0 sys=4.0 "cygapr-0-0.dll" v0.0 ts=2005/11/11 15:03 103k 2006/06/05 C:\cygwin\bin\cygapr-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygapr-1-0.dll" v0.0 ts=2006/6/5 17:25 67k 2005/11/11 C:\cygwin\bin\cygaprutil-0-0.dll - os=4.0 img=1.0 sys=4.0 "cygaprutil-0-0.dll" v0.0 ts=2005/11/11 16:55 70k 2006/06/05 C:\cygwin\bin\cygaprutil-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygaprutil-1-0.dll" v0.0 ts=2006/6/5 23:06 52k 2005/11/10 C:\cygwin\bin\cygart_lgpl-2.dll - os=4.0 img=1.0 sys=4.0 "cygart_lgpl-2.dll" v0.0 ts=2005/11/10 20:33 76k 2005/07/30 C:\cygwin\bin\cygart_lgpl_2-2.dll - os=4.0 img=1.0 sys=4.0 "cygart_lgpl_2-2.dll" v0.0 ts=2005/7/30 11:46 802k 2003/09/15 C:\cygwin\bin\cygaspell-15.dll - os=4.0 img=1.0 sys=4.0 "cygaspell-15.dll" v0.0 ts=2003/9/15 13:32 87k 2006/02/16 C:\cygwin\bin\cygatk-1.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygatk-1.0-0.dll" v0.0 ts=2006/2/6 21:13 145k 2004/09/02 C:\cygwin\bin\cygaudiofile-0.dll - os=4.0 img=1.0 sys=4.0 "cygaudiofile-0.dll" v0.0 ts=2004/9/2 4:38 329k 2006/04/27 C:\cygwin\bin\cygbonobo-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygbonobo-2-0.dll" v0.0 ts=2006/4/27 23:21 68k 2006/04/27 C:\cygwin\bin\cygbonobo-activation-4.dll - os=4.0 img=1.0 sys=4.0 "cygbonobo-activation-4.dll" v0.0 ts=2006/4/27 23:16 334k 2005/09/27 C:\cygwin\bin\cygbonoboui-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygbonoboui-2-0.dll" v0.0 ts=2005/9/27 22:26 56k 2005/07/09 C:\cygwin\bin\cygbz2-1.dll - os=4.0 img=1.0 sys=4.0 "cygbz2-1.dll" v0.0 ts=2005/7/9 6:09 54k 2002/01/27 C:\cygwin\bin\cygbz21.0.dll - os=4.0 img=1.0 sys=4.0 "cygbz21.0.dll" v0.0 ts=2002/1/27 1:07 317k 2005/10/07 C:\cygwin\bin\cygcairo-2.dll - os=4.0 img=1.0 sys=4.0 "cygcairo-2.dll" v0.0 ts=2005/10/7 22:49 7k 2005/11/20 C:\cygwin\bin\cygcharset-1.dll - os=4.0 img=1.0 sys=4.0 "cygcharset-1.dll" v0.0 ts=2005/11/20 2:24 23k 2006/05/08 C:\cygwin\bin\cygcheck-0.dll - os=4.0 img=1.0 sys=4.0 "cygcheck-0.dll" v0.0 ts=2006/5/8 3:42 258k 2006/08/08 C:\cygwin\bin\cygclamav-1.dll - os=4.0 img=1.0 sys=4.0 "cygclamav-1.dll" v0.0 ts=2006/8/8 21:32 16k 2005/10/11 C:\cygwin\bin\cygcompface-0.dll - os=4.0 img=1.0 sys=4.0 "cygcompface-0.dll" v0.0 ts=2005/10/11 14:58 529k 2004/06/27 C:\cygwin\bin\cygcppunit-1-9-14.dll - os=4.0 img=1.0 sys=4.0 "cygcppunit-1-9-14.dll" v0.0 ts=2004/6/27 2:29 192k 2006/03/08 C:\cygwin\bin\cygcroco-0.6-3.dll - os=4.0 img=1.0 sys=4.0 "cygcroco-0.6-3.dll" v0.0 ts=2006/3/8 1:04 7k 2003/10/19 C:\cygwin\bin\cygcrypt-0.dll - os=4.0 img=1.0 sys=4.0 "cygcrypt-0.dll" v0.0 ts=2003/10/19 8:57 1108k 2006/06/01 C:\cygwin\bin\cygcrypto-0.9.7.dll - os=4.0 img=1.0 sys=4.0 "cygcrypto-0.9.7.dll" v0.0 ts=2006/6/1 16:50 1050k 2006/06/01 C:\cygwin\bin\cygcrypto-0.9.8.dll - os=4.0 img=1.0 sys=4.0 "cygcrypto-0.9.8.dll" v0.0 ts=2006/6/1 17:08 194k 2006/06/12 C:\cygwin\bin\cygcurl-3.dll - os=4.0 img=1.0 sys=4.0 "cygcurl-3.dll" v0.0 ts=2006/6/12 10:00 831k 2003/09/20 C:\cygwin\bin\cygdb-4.1.dll - os=4.0 img=1.0 sys=4.0 "cygdb-4.1.dll" v0.0 ts=2003/9/20 22:51 895k 2004/04/28 C:\cygwin\bin\cygdb-4.2.dll - os=4.0 img=1.0 sys=4.0 "cygdb-4.2.dll" v0.0 ts=2004/4/27 16:31 965k 2005/05/14 C:\cygwin\bin\cygdb-4.3.dll - os=4.0 img=1.0 sys=4.0 "cygdb-4.3.dll" v0.0 ts=2005/5/14 13:37 1080k 2003/09/20 C:\cygwin\bin\cygdb_cxx-4.1.dll - os=4.0 img=1.0 sys=4.0 "cygdb_cxx-4.1.dll" v0.0 ts=2003/9/20 22:53 1156k 2004/04/28 C:\cygwin\bin\cygdb_cxx-4.2.dll - os=4.0 img=1.0 sys=4.0 "cygdb_cxx-4.2.dll" v0.0 ts=2004/4/27 16:35 1240k 2005/05/14 C:\cygwin\bin\cygdb_cxx-4.3.dll - os=4.0 img=1.0 sys=4.0 "cygdb_cxx-4.3.dll" v0.0 ts=2005/5/14 13:41 48k 2006/06/06 C:\cygwin\bin\cygecpg.dll - os=4.0 img=1.0 sys=4.0 "cygecpg.dll" v0.0 ts=2006/6/6 7:36 58k 2006/07/14 C:\cygwin\bin\cygedsio-0.dll - os=4.0 img=1.0 sys=4.0 "cygedsio-0.dll" v0.0 ts=2006/7/14 14:47 507k 2005/10/10 C:\cygwin\bin\cygEMF-1.dll - os=4.0 img=1.0 sys=4.0 "cygEMF-1.dll" v0.0 ts=2005/10/10 6:11 27k 2005/08/21 C:\cygwin\bin\cygesd-0.dll - os=4.0 img=1.0 sys=4.0 "cygesd-0.dll" v0.0 ts=2005/8/22 0:04 94k 2004/06/07 C:\cygwin\bin\cygexif-10.dll - os=4.0 img=1.0 sys=4.0 "cygexif-10.dll" v0.0 ts=2004/6/7 9:53 107k 2005/08/08 C:\cygwin\bin\cygexif-12.dll - os=4.0 img=1.0 sys=4.0 "cygexif-12.dll" v0.0 ts=2005/8/8 12:50 174k 2004/10/14 C:\cygwin\bin\cygexpat-0.dll - os=4.0 img=1.0 sys=4.0 "cygexpat-0.dll" v0.0 ts=2004/10/14 9:34 64k 2006/06/09 C:\cygwin\bin\cygexslt-0.dll - os=4.0 img=1.0 sys=4.0 "cygexslt-0.dll" v0.0 ts=2006/6/9 21:17 286k 2006/08/06 C:\cygwin\bin\cygfcgi++-0.dll - os=4.0 img=1.0 sys=4.0 "cygfcgi++-0.dll" v0.0 ts=2006/8/6 21:09 30k 2006/08/06 C:\cygwin\bin\cygfcgi-0.dll - os=4.0 img=1.0 sys=4.0 "cygfcgi-0.dll" v0.0 ts=2006/8/6 21:09 509k 2006/01/11 C:\cygwin\bin\cygfftw3-3.dll - os=4.0 img=1.0 sys=4.0 "cygfftw3-3.dll" v0.0 ts=2006/1/11 2:24 69k 2006/01/11 C:\cygwin\bin\cygfftw3_threads-3.dll - os=4.0 img=1.0 sys=4.0 "cygfftw3_threads-3.dll" v0.0 ts=2006/1/11 13:27 214k 2005/08/13 C:\cygwin\bin\cygFLAC++-5.dll - os=4.0 img=1.0 sys=4.0 "cygFLAC++-5.dll" v0.0 ts=2005/8/13 9:09 274k 2005/08/13 C:\cygwin\bin\cygFLAC-7.dll - os=4.0 img=1.0 sys=4.0 "cygFLAC-7.dll" v0.0 ts=2005/8/13 9:04 654k 2003/11/04 C:\cygwin\bin\cygfltknox-0.dll - os=4.0 img=1.0 sys=4.0 "cygfltknox-0.dll" v0.0 ts=2003/11/4 21:57 65k 2003/11/04 C:\cygwin\bin\cygfltknox_forms-0.dll - os=4.0 img=1.0 sys=4.0 "cygfltknox_forms-0.dll" v0.0 ts=2003/11/4 21:57 81k 2003/11/04 C:\cygwin\bin\cygfltknox_gl-0.dll - os=4.0 img=1.0 sys=4.0 "cygfltknox_gl-0.dll" v0.0 ts=2003/11/4 21:58 108k 2003/11/04 C:\cygwin\bin\cygfltknox_images-0.dll - os=4.0 img=1.0 sys=4.0 "cygfltknox_images-0.dll" v0.0 ts=2003/11/4 21:58 129k 2004/03/11 C:\cygwin\bin\cygfontconfig-1.dll - os=4.0 img=1.0 sys=4.0 "cygfontconfig-1.dll" v0.0 ts=2004/3/11 0:12 40k 2006/03/24 C:\cygwin\bin\cygform-8.dll - os=4.0 img=1.0 sys=4.0 "cygform-8.dll" v0.0 ts=2006/3/24 7:16 45k 2001/04/25 C:\cygwin\bin\cygform5.dll - os=4.0 img=1.0 sys=4.0 "cygform5.dll" v0.0 ts=2001/4/25 6:28 35k 2002/01/09 C:\cygwin\bin\cygform6.dll - os=4.0 img=1.0 sys=4.0 "cygform6.dll" v0.0 ts=2002/1/9 6:03 48k 2003/08/09 C:\cygwin\bin\cygform7.dll - os=4.0 img=1.0 sys=4.0 "cygform7.dll" v0.0 ts=2003/8/9 10:25 859k 2005/08/08 C:\cygwin\bin\cygfpx-1.dll - os=4.0 img=1.0 sys=4.0 "cygfpx-1.dll" v0.0 ts=2005/8/8 22:35 375k 2005/09/06 C:\cygwin\bin\cygfreetype-6.dll - os=4.0 img=1.0 sys=4.0 "cygfreetype-6.dll" v0.0 ts=2005/9/6 23:51 23k 2005/11/30 C:\cygwin\bin\cyggailutil-17.dll - os=4.0 img=1.0 sys=4.0 "cyggailutil-17.dll" v0.0 ts=2005/11/30 21:11 176k 2006/05/30 C:\cygwin\bin\cyggconf-2-4.dll - os=4.0 img=1.0 sys=4.0 "cyggconf-2-4.dll" v0.0 ts=2006/5/30 0:24 323k 2005/07/10 C:\cygwin\bin\cyggcrypt-11.dll - os=4.0 img=1.0 sys=4.0 "cyggcrypt-11.dll" v0.0 ts=2005/7/10 1:10 222k 2005/01/13 C:\cygwin\bin\cyggd-2.dll - os=4.0 img=1.0 sys=4.0 "cyggd-2.dll" v0.0 ts=2005/1/13 15:56 28k 2003/07/20 C:\cygwin\bin\cyggdbm-3.dll - os=4.0 img=1.0 sys=4.0 "cyggdbm-3.dll" v0.0 ts=2003/7/20 8:58 30k 2003/08/11 C:\cygwin\bin\cyggdbm-4.dll - os=4.0 img=1.0 sys=4.0 "cyggdbm-4.dll" v0.0 ts=2003/8/11 3:12 19k 2003/03/22 C:\cygwin\bin\cyggdbm.dll - os=4.0 img=1.0 sys=4.0 "cyggdbm.dll" v0.0 ts=2002/2/20 3:05 15k 2003/07/20 C:\cygwin\bin\cyggdbm_compat-3.dll - os=4.0 img=1.0 sys=4.0 "cyggdbm_compat-3.dll" v0.0 ts=2003/7/20 9:00 15k 2003/08/11 C:\cygwin\bin\cyggdbm_compat-4.dll - os=4.0 img=1.0 sys=4.0 "cyggdbm_compat-4.dll" v0.0 ts=2003/8/11 3:13 195k 2004/09/02 C:\cygwin\bin\cyggdk-1-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggdk-1-2-0.dll" v0.0 ts=2004/9/2 19:31 451k 2005/12/27 C:\cygwin\bin\cyggdk-x11-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggdk-x11-2.0-0.dll" v0.0 ts=2005/12/26 11:20 128k 2005/08/02 C:\cygwin\bin\cyggdk_imlib-1.dll - os=4.0 img=1.0 sys=4.0 "cyggdk_imlib-1.dll" v0.0 ts=2005/8/2 1:36 77k 2005/12/27 C:\cygwin\bin\cyggdk_pixbuf-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggdk_pixbuf-2.0-0.dll" v0.0 ts=2005/12/26 11:11 72k 2005/11/16 C:\cygwin\bin\cyggdk_pixbuf-2.dll - os=4.0 img=1.0 sys=4.0 "cyggdk_pixbuf-2.dll" v0.0 ts=2005/11/16 21:40 54k 2005/12/27 C:\cygwin\bin\cyggdk_pixbuf_xlib-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggdk_pixbuf_xlib-2.0-0.dll" v0.0 ts=2005/12/26 12:03 105k 2005/11/16 C:\cygwin\bin\cyggdk_pixbuf_xlib-2.dll - os=4.0 img=1.0 sys=4.0 "cyggdk_pixbuf_xlib-2.dll" v0.0 ts=2005/11/16 21:41 23k 2006/02/14 C:\cygwin\bin\cygGeoIP-1.dll - os=4.0 img=1.0 sys=4.0 "cygGeoIP-1.dll" v0.0 ts=2006/2/6 21:13 21k 2006/02/14 C:\cygwin\bin\cygGeoIPUpdate-0.dll - os=4.0 img=1.0 sys=4.0 "cygGeoIPUpdate-0.dll" v0.0 ts=2006/2/14 7:27 116k 2004/10/10 C:\cygwin\bin\cyggeotiff-1.dll - os=4.0 img=1.0 sys=4.0 "cyggeotiff-1.dll" v0.0 ts=2004/10/11 0:55 78k 2005/11/20 C:\cygwin\bin\cyggettextlib-0-14-5.dll - os=4.0 img=1.0 sys=4.0 "cyggettextlib-0-14-5.dll" v0.0 ts=2005/11/20 2:11 13k 2005/11/20 C:\cygwin\bin\cyggettextpo-0.dll - os=4.0 img=1.0 sys=4.0 "cyggettextpo-0.dll" v0.0 ts=2005/11/20 2:11 163k 2005/11/20 C:\cygwin\bin\cyggettextsrc-0-14-5.dll - os=4.0 img=1.0 sys=4.0 "cyggettextsrc-0-14-5.dll" v0.0 ts=2005/11/20 2:11 32k 2006/02/28 C:\cygwin\bin\cyggg-1.dll - os=4.0 img=1.0 sys=4.0 "cyggg-1.dll" v0.0 ts=2006/2/28 16:13 46k 2006/03/02 C:\cygwin\bin\cygggi-2.dll - os=4.0 img=1.0 sys=4.0 "cygggi-2.dll" v0.0 ts=2006/3/2 16:53 9k 2006/03/02 C:\cygwin\bin\cygggimisc-2.dll - os=4.0 img=1.0 sys=4.0 "cygggimisc-2.dll" v0.0 ts=2006/3/2 20:05 9k 2006/03/02 C:\cygwin\bin\cygggiwmh-0.dll - os=4.0 img=1.0 sys=4.0 "cygggiwmh-0.dll" v0.0 ts=2006/3/2 19:48 24k 2006/02/28 C:\cygwin\bin\cyggii-1.dll - os=4.0 img=1.0 sys=4.0 "cyggii-1.dll" v0.0 ts=2006/2/28 16:15 81k 2005/08/18 C:\cygwin\bin\cygglade-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygglade-2.0-0.dll" v0.0 ts=2005/8/18 19:51 135k 2005/03/16 C:\cygwin\bin\cygglib-1-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygglib-1-2-0.dll" v0.0 ts=2005/3/16 2:16 515k 2006/06/06 C:\cygwin\bin\cygglib-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygglib-2.0-0.dll" v0.0 ts=2006/6/5 23:32 135k 2005/12/11 C:\cygwin\bin\cygglitz-1.dll - os=4.0 img=1.0 sys=4.0 "cygglitz-1.dll" v0.0 ts=2005/12/11 20:35 19k 2005/12/11 C:\cygwin\bin\cygglitz-glx-1.dll - os=4.0 img=1.0 sys=4.0 "cygglitz-glx-1.dll" v0.0 ts=2005/12/11 20:39 12k 2005/03/16 C:\cygwin\bin\cyggmodule-1-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggmodule-1-2-0.dll" v0.0 ts=2005/3/16 2:18 10k 2006/06/06 C:\cygwin\bin\cyggmodule-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggmodule-2.0-0.dll" v0.0 ts=2006/6/5 23:36 158k 2004/10/16 C:\cygwin\bin\cyggmp-3.dll - os=4.0 img=1.0 sys=4.0 "cyggmp-3.dll" v0.0 ts=2004/10/16 8:40 288k 2004/10/16 C:\cygwin\bin\cyggmpxx-3.dll - os=4.0 img=1.0 sys=4.0 "cyggmpxx-3.dll" v0.0 ts=2004/10/16 8:40 68k 2005/12/01 C:\cygwin\bin\cyggnome-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnome-2-0.dll" v0.0 ts=2005/12/1 2:14 87k 2005/11/10 C:\cygwin\bin\cyggnome-32.dll - os=4.0 img=1.0 sys=4.0 "cyggnome-32.dll" v0.0 ts=2005/11/10 21:21 35k 2006/02/28 C:\cygwin\bin\cyggnome-keyring-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnome-keyring-0.dll" v0.0 ts=2006/2/28 22:10 156k 2005/11/30 C:\cygwin\bin\cyggnomecanvas-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnomecanvas-2-0.dll" v0.0 ts=2005/11/30 22:55 12k 2005/11/16 C:\cygwin\bin\cyggnomecanvaspixbuf-1.dll - os=4.0 img=1.0 sys=4.0 "cyggnomecanvaspixbuf-1.dll" v0.0 ts=2005/11/16 21:41 338k 2005/08/22 C:\cygwin\bin\cyggnomeprint-2-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnomeprint-2-2-0.dll" v0.0 ts=2005/8/22 1:20 179k 2005/08/22 C:\cygwin\bin\cyggnomeprintui-2-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnomeprintui-2-2-0.dll" v0.0 ts=2005/8/22 20:14 18k 2005/11/10 C:\cygwin\bin\cyggnomesupport-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnomesupport-0.dll" v0.0 ts=2005/11/10 20:30 509k 2006/02/07 C:\cygwin\bin\cyggnomeui-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnomeui-2-0.dll" v0.0 ts=2006/2/7 21:57 826k 2005/11/10 C:\cygwin\bin\cyggnomeui-32.dll - os=4.0 img=1.0 sys=4.0 "cyggnomeui-32.dll" v0.0 ts=2005/11/10 21:24 332k 2005/12/06 C:\cygwin\bin\cyggnomevfs-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnomevfs-2-0.dll" v0.0 ts=2005/12/5 22:01 42k 2005/11/10 C:\cygwin\bin\cyggnorba-27.dll - os=4.0 img=1.0 sys=4.0 "cyggnorba-27.dll" v0.0 ts=2005/11/10 21:27 22k 2005/11/10 C:\cygwin\bin\cyggnorbagtk-0.dll - os=4.0 img=1.0 sys=4.0 "cyggnorbagtk-0.dll" v0.0 ts=2005/11/10 21:10 382k 2005/08/21 C:\cygwin\bin\cyggnutls-11.dll - os=4.0 img=1.0 sys=4.0 "cyggnutls-11.dll" v0.0 ts=2005/8/21 12:40 71k 2005/08/21 C:\cygwin\bin\cyggnutls-extra-11.dll - os=4.0 img=1.0 sys=4.0 "cyggnutls-extra-11.dll" v0.0 ts=2005/8/21 12:42 21k 2005/08/21 C:\cygwin\bin\cyggnutls-openssl-11.dll - os=4.0 img=1.0 sys=4.0 "cyggnutls-openssl-11.dll" v0.0 ts=2005/8/21 12:42 222k 2006/06/06 C:\cygwin\bin\cyggobject-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggobject-2.0-0.dll" v0.0 ts=2006/6/5 23:35 12k 2005/07/09 C:\cygwin\bin\cyggpg-error-0.dll - os=4.0 img=1.0 sys=4.0 "cyggpg-error-0.dll" v0.0 ts=2005/7/9 23:34 351k 2004/07/17 C:\cygwin\bin\cygGraphicsMagick++-0.dll - os=4.0 img=1.0 sys=4.0 "cygGraphicsMagick++-0.dll" v0.0 ts=2004/7/17 9:48 2170k 2004/07/17 C:\cygwin\bin\cygGraphicsMagick-0.dll - os=4.0 img=1.0 sys=4.0 "cygGraphicsMagick-0.dll" v0.0 ts=2004/7/17 9:46 1444k 2006/05/24 C:\cygwin\bin\cyggsl-0.dll - os=4.0 img=1.0 sys=4.0 "cyggsl-0.dll" v0.0 ts=2006/5/24 21:26 186k 2006/05/24 C:\cygwin\bin\cyggslcblas-0.dll - os=4.0 img=1.0 sys=4.0 "cyggslcblas-0.dll" v0.0 ts=2006/5/24 20:43 10k 2005/03/16 C:\cygwin\bin\cyggthread-1-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggthread-1-2-0.dll" v0.0 ts=2005/3/16 2:18 14k 2006/06/06 C:\cygwin\bin\cyggthread-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggthread-2.0-0.dll" v0.0 ts=2006/6/5 23:36 1293k 2004/09/02 C:\cygwin\bin\cyggtk-1-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggtk-1-2-0.dll" v0.0 ts=2004/9/2 19:44 2764k 2005/12/27 C:\cygwin\bin\cyggtk-x11-2.0-0.dll - os=4.0 img=1.0 sys=4.0 "cyggtk-x11-2.0-0.dll" v0.0 ts=2005/12/26 11:43 340k 2006/02/15 C:\cygwin\bin\cyggtkhtml-2-0.dll - os=4.0 img=1.0 sys=4.0 "cyggtkhtml-2-0.dll" v0.0 ts=2006/2/15 2:56 338k 2005/11/10 C:\cygwin\bin\cyggtkxmhtml-1.dll - os=4.0 img=1.0 sys=4.0 "cyggtkxmhtml-1.dll" v0.0 ts=2005/11/10 21:04 528k 2005/10/09 C:\cygwin\bin\cygguile-12.dll - os=4.0 img=1.0 sys=4.0 "cygguile-12.dll" v0.0 ts=2005/10/9 14:25 659k 2005/10/08 C:\cygwin\bin\cygguile-16.dll - os=4.0 img=1.0 sys=4.0 "cygguile-16.dll" v0.0 ts=2005/10/6 22:15 18k 2005/10/09 C:\cygwin\bin\cygguile-ltdl-1.dll - os=4.0 img=1.0 sys=4.0 "cygguile-ltdl-1.dll" v0.0 ts=2005/10/9 14:24 68k 2005/10/09 C:\cygwin\bin\cygguile-srfi-srfi-13-14-v-1-1.dll - os=4.0 img=1.0 sys=4.0 "cygguile-srfi-srfi-13-14-v-1-1.dll" v0.0 ts=2005/10/9 14:25 4k 2005/10/08 C:\cygwin\bin\cygguile-srfi-srfi-13-14-v-2-2.dll - os=4.0 img=1.0 sys=4.0 "cygguile-srfi-srfi-13-14-v-2-2.dll" v0.0 ts=2005/10/8 8:52 31k 2005/10/09 C:\cygwin\bin\cygguile-srfi-srfi-4-v-1-1.dll - os=4.0 img=1.0 sys=4.0 "cygguile-srfi-srfi-4-v-1-1.dll" v0.0 ts=2005/10/9 14:25 4k 2005/10/08 C:\cygwin\bin\cygguile-srfi-srfi-4-v-2-2.dll - os=4.0 img=1.0 sys=4.0 "cygguile-srfi-srfi-4-v-2-2.dll" v0.0 ts=2005/10/8 8:52 8k 2005/10/08 C:\cygwin\bin\cygguile-srfi-srfi-60-v-1-1.dll - os=4.0 img=1.0 sys=4.0 "cygguile-srfi-srfi-60-v-1-1.dll" v0.0 ts=2005/10/6 22:15 12k 2005/10/09 C:\cygwin\bin\cygguilereadline-v-12-12.dll - os=4.0 img=1.0 sys=4.0 "cygguilereadline-v-12-12.dll" v0.0 ts=2005/10/9 14:25 11k 2005/10/08 C:\cygwin\bin\cygguilereadline-v-16-16.dll - os=4.0 img=1.0 sys=4.0 "cygguilereadline-v-16-16.dll" v0.0 ts=2005/10/6 22:15 17k 2001/06/28 C:\cygwin\bin\cyghistory4.dll - os=4.0 img=1.0 sys=4.0 "cyghistory4.dll" v0.0 ts=2001/1/7 4:34 29k 2003/08/10 C:\cygwin\bin\cyghistory5.dll - os=4.0 img=1.0 sys=4.0 "cyghistory5.dll" v0.0 ts=2003/8/11 0:16 24k 2006/03/25 C:\cygwin\bin\cyghistory6.dll - os=4.0 img=1.0 sys=4.0 "cyghistory6.dll" v0.0 ts=2006/3/25 14:05 335k 2006/06/06 C:\cygwin\bin\cyghttpd2core.dll - os=4.0 img=1.0 sys=4.0 "cyghttpd2core.dll" v0.0 ts=2006/6/6 13:28 947k 2005/11/20 C:\cygwin\bin\cygiconv-2.dll - os=4.0 img=1.0 sys=4.0 "cygiconv-2.dll" v0.0 ts=2005/11/20 2:24 136k 2005/08/01 C:\cygwin\bin\cygIDL-0-6-0.dll - os=4.0 img=1.0 sys=4.0 "cygIDL-0-6-0.dll" v0.0 ts=2005/8/1 20:50 142k 2005/08/01 C:\cygwin\bin\cygIDL-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygIDL-2-0.dll" v0.0 ts=2005/8/1 22:33 40k 2005/08/01 C:\cygwin\bin\cygIIOP-0.dll - os=4.0 img=1.0 sys=4.0 "cygIIOP-0.dll" v0.0 ts=2005/8/1 21:28 155k 2005/08/02 C:\cygwin\bin\cygImlib-1.dll - os=4.0 img=1.0 sys=4.0 "cygImlib-1.dll" v0.0 ts=2005/8/2 1:37 9k 2005/08/02 C:\cygwin\bin\cygimlib-bmp.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-bmp.dll" v0.0 ts=2005/8/2 1:38 6k 2005/08/02 C:\cygwin\bin\cygimlib-gif.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-gif.dll" v0.0 ts=2005/8/2 1:38 7k 2005/08/02 C:\cygwin\bin\cygimlib-jpeg.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-jpeg.dll" v0.0 ts=2005/8/2 1:38 11k 2005/08/02 C:\cygwin\bin\cygimlib-png.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-png.dll" v0.0 ts=2005/8/2 1:39 8k 2005/08/02 C:\cygwin\bin\cygimlib-ppm.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-ppm.dll" v0.0 ts=2005/8/2 1:38 7k 2005/08/02 C:\cygwin\bin\cygimlib-ps.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-ps.dll" v0.0 ts=2005/8/2 1:38 6k 2005/08/02 C:\cygwin\bin\cygimlib-tiff.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-tiff.dll" v0.0 ts=2005/8/2 1:39 10k 2005/08/02 C:\cygwin\bin\cygimlib-xpm.dll - os=4.0 img=1.0 sys=4.0 "cygimlib-xpm.dll" v0.0 ts=2005/8/2 1:38 22k 2001/12/13 C:\cygwin\bin\cygintl-1.dll - os=4.0 img=1.0 sys=4.0 "cygintl-1.dll" v0.0 ts=2001/12/13 9:28 37k 2003/08/10 C:\cygwin\bin\cygintl-2.dll - os=4.0 img=1.0 sys=4.0 "cygintl-2.dll" v0.0 ts=2003/8/10 22:50 31k 2005/11/20 C:\cygwin\bin\cygintl-3.dll - os=4.0 img=1.0 sys=4.0 "cygintl-3.dll" v0.0 ts=2005/11/20 2:04 21k 2001/06/20 C:\cygwin\bin\cygintl.dll - os=4.0 img=1.0 sys=4.0 "cygintl.dll" v0.0 ts=2001/6/20 18:09 12k 2003/02/17 C:\cygwin\bin\cygioperm-0.dll - os=4.0 img=1.0 sys=4.0 "cygioperm-0.dll" v0.0 ts=2003/2/17 19:58 241k 2004/08/06 C:\cygwin\bin\cygjasper-1-701-1.dll - os=4.0 img=1.0 sys=4.0 "cygjasper-1-701-1.dll" v0.0 ts=2004/8/6 16:17 48k 2003/08/10 C:\cygwin\bin\cygjbig1.dll - os=4.0 img=1.0 sys=4.0 "cygjbig1.dll" v0.0 ts=2003/8/11 0:58 132k 2003/08/11 C:\cygwin\bin\cygjpeg-62.dll - os=4.0 img=1.0 sys=4.0 "cygjpeg-62.dll" v0.0 ts=2003/8/11 1:37 119k 2002/02/09 C:\cygwin\bin\cygjpeg6b.dll - os=4.0 img=1.0 sys=4.0 "cygjpeg6b.dll" v0.0 ts=2002/2/9 5:19 60k 2004/09/27 C:\cygwin\bin\cygkpathsea-3.dll - os=4.0 img=1.0 sys=4.0 "cygkpathsea-3.dll" v0.0 ts=2004/9/27 18:32 65k 2005/05/05 C:\cygwin\bin\cygkpathsea-4.dll - os=4.0 img=1.0 sys=4.0 "cygkpathsea-4.dll" v0.0 ts=2005/5/5 15:33 41k 2005/08/29 C:\cygwin\bin\cyglber-2-2-7.dll - os=4.0 img=1.0 sys=4.0 "cyglber-2-2-7.dll" v0.0 ts=2005/8/14 18:48 40k 2004/01/02 C:\cygwin\bin\cyglber-2.dll - os=4.0 img=1.0 sys=4.0 "cyglber-2.dll" v0.0 ts=2004/1/2 11:11 156k 2005/08/08 C:\cygwin\bin\cyglcms-1.dll - os=4.0 img=1.0 sys=4.0 "cyglcms-1.dll" v0.0 ts=2005/8/8 11:15 176k 2005/08/29 C:\cygwin\bin\cygldap-2-2-7.dll - os=4.0 img=1.0 sys=4.0 "cygldap-2-2-7.dll" v0.0 ts=2005/8/29 12:14 194k 2004/01/02 C:\cygwin\bin\cygldap-2.dll - os=4.0 img=1.0 sys=4.0 "cygldap-2.dll" v0.0 ts=2004/1/2 11:27 188k 2005/08/29 C:\cygwin\bin\cygldap_r-2-2-7.dll - os=4.0 img=1.0 sys=4.0 "cygldap_r-2-2-7.dll" v0.0 ts=2005/8/29 12:14 202k 2004/01/02 C:\cygwin\bin\cygldap_r-2.dll - os=4.0 img=1.0 sys=4.0 "cygldap_r-2.dll" v0.0 ts=2004/1/2 11:27 68k 2006/01/21 C:\cygwin\bin\cyglightcomp.dll - os=4.0 img=1.0 sys=4.0 "cyglightcomp.dll" v0.0 ts=2006/1/21 10:42 23k 2006/04/19 C:\cygwin\bin\cygltdl-3.dll - os=4.0 img=1.0 sys=4.0 "cygltdl-3.dll" v0.0 ts=2006/4/19 7:19 48k 2005/11/19 C:\cygwin\bin\cygmagic-1.dll - os=4.0 img=1.0 sys=4.0 "cygmagic-1.dll" v0.0 ts=2005/11/19 11:22 369k 2004/08/11 C:\cygwin\bin\cygMagick++-6.dll - os=4.0 img=1.0 sys=4.0 "cygMagick++-6.dll" v0.0 ts=2004/8/11 7:04 3214k 2004/08/11 C:\cygwin\bin\cygMagick-6.dll - os=4.0 img=1.0 sys=4.0 "cygMagick-6.dll" v0.0 ts=2004/8/11 6:37 181k 2003/10/06 C:\cygwin\bin\cygmcrypt-4.dll - os=4.0 img=1.0 sys=4.0 "cygmcrypt-4.dll" v0.0 ts=2003/10/6 15:54 21k 2006/03/24 C:\cygwin\bin\cygmenu-8.dll - os=4.0 img=1.0 sys=4.0 "cygmenu-8.dll" v0.0 ts=2006/3/24 7:16 26k 2001/04/25 C:\cygwin\bin\cygmenu5.dll - os=4.0 img=1.0 sys=4.0 "cygmenu5.dll" v0.0 ts=2001/4/25 6:27 20k 2002/01/09 C:\cygwin\bin\cygmenu6.dll - os=4.0 img=1.0 sys=4.0 "cygmenu6.dll" v0.0 ts=2002/1/9 6:03 29k 2003/08/09 C:\cygwin\bin\cygmenu7.dll - os=4.0 img=1.0 sys=4.0 "cygmenu7.dll" v0.0 ts=2003/8/9 10:25 222k 2005/05/28 C:\cygwin\bin\cygmhash-2.dll - os=4.0 img=1.0 sys=4.0 "cygmhash-2.dll" v0.0 ts=2005/5/28 10:40 21k 2004/10/22 C:\cygwin\bin\cygminires.dll - os=4.0 img=1.0 sys=4.0 "cygminires.dll" v0.0 ts=2004/10/22 21:28 330k 2005/08/08 C:\cygwin\bin\cygmng-1.dll - os=4.0 img=1.0 sys=4.0 "cygmng-1.dll" v0.0 ts=2005/8/8 22:17 71k 2004/10/16 C:\cygwin\bin\cygmp-3.dll - os=4.0 img=1.0 sys=4.0 "cygmp-3.dll" v0.0 ts=2004/10/16 8:40 95k 2004/10/16 C:\cygwin\bin\cygmpfr-0.dll - os=4.0 img=1.0 sys=4.0 "cygmpfr-0.dll" v0.0 ts=2004/10/16 8:47 408k 2006/05/11 C:\cygwin\bin\cygnaim_core-0.dll - os=4.0 img=1.0 sys=4.0 "cygnaim_core-0.dll" v0.0 ts=2006/5/11 2:56 67k 2006/03/24 C:\cygwin\bin\cygncurses++-8.dll - os=4.0 img=1.0 sys=4.0 "cygncurses++-8.dll" v0.0 ts=2006/3/24 7:17 156k 2001/04/25 C:\cygwin\bin\cygncurses++5.dll - os=4.0 img=1.0 sys=4.0 "cygncurses++5.dll" v0.0 ts=2001/4/25 6:29 175k 2002/01/09 C:\cygwin\bin\cygncurses++6.dll - os=4.0 img=1.0 sys=4.0 "cygncurses++6.dll" v0.0 ts=2002/1/9 6:03 227k 2006/03/24 C:\cygwin\bin\cygncurses-8.dll - os=4.0 img=1.0 sys=4.0 "cygncurses-8.dll" v0.0 ts=2006/3/24 4:51 226k 2001/04/25 C:\cygwin\bin\cygncurses5.dll - os=4.0 img=1.0 sys=4.0 "cygncurses5.dll" v0.0 ts=2001/4/25 6:17 202k 2002/01/09 C:\cygwin\bin\cygncurses6.dll - os=4.0 img=1.0 sys=4.0 "cygncurses6.dll" v0.0 ts=2002/1/9 6:03 224k 2003/08/09 C:\cygwin\bin\cygncurses7.dll - os=4.0 img=1.0 sys=4.0 "cygncurses7.dll" v0.0 ts=2003/8/9 10:24 91k 2005/11/24 C:\cygwin\bin\cygneon-24.dll - os=4.0 img=1.0 sys=4.0 "cygneon-24.dll" v0.0 ts=2005/11/24 12:21 90k 2006/01/25 C:\cygwin\bin\cygneon-25.dll - os=4.0 img=1.0 sys=4.0 "cygneon-25.dll" v0.0 ts=2006/1/25 11:02 150k 2006/03/29 C:\cygwin\bin\cygnetpbm-10.dll - os=4.0 img=1.0 sys=4.0 "cygnetpbm-10.dll" v0.0 ts=2006/3/29 23:51 23k 2005/08/12 C:\cygwin\bin\cygogg-0.dll - os=4.0 img=1.0 sys=4.0 "cygogg-0.dll" v0.0 ts=2005/8/12 23:39 150k 2005/08/13 C:\cygwin\bin\cygOggFLAC++-2.dll - os=4.0 img=1.0 sys=4.0 "cygOggFLAC++-2.dll" v0.0 ts=2005/8/13 9:09 107k 2005/08/13 C:\cygwin\bin\cygOggFLAC-3.dll - os=4.0 img=1.0 sys=4.0 "cygOggFLAC-3.dll" v0.0 ts=2005/8/13 9:09 49k 2004/08/02 C:\cygwin\bin\cygogrove-0.dll - os=4.0 img=1.0 sys=4.0 "cygogrove-0.dll" v0.0 ts=2004/8/2 16:41 131k 2005/08/21 C:\cygwin\bin\cygopencdk-8.dll - os=4.0 img=1.0 sys=4.0 "cygopencdk-8.dll" v0.0 ts=2005/8/21 16:35 217k 2005/08/01 C:\cygwin\bin\cygORBit-0.dll - os=4.0 img=1.0 sys=4.0 "cygORBit-0.dll" v0.0 ts=2005/8/1 21:29 281k 2006/04/25 C:\cygwin\bin\cygORBit-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygORBit-2-0.dll" v0.0 ts=2006/4/25 3:16 34k 2006/04/25 C:\cygwin\bin\cygORBit-imodule-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygORBit-imodule-2-0.dll" v0.0 ts=2006/4/25 3:30 28k 2005/08/01 C:\cygwin\bin\cygORBitCosNaming-0.dll - os=4.0 img=1.0 sys=4.0 "cygORBitCosNaming-0.dll" v0.0 ts=2005/8/1 21:29 16k 2006/04/25 C:\cygwin\bin\cygORBitCosNaming-2-0.dll - os=4.0 img=1.0 sys=4.0 "cygORBitCosNaming-2-0.dll" v0.0 ts=2006/4/25 3:22 5k 2005/08/01 C:\cygwin\bin\cygORBitutil-0.dll - os=4.0 img=1.0 sys=4.0 "cygORBitutil-0.dll" v0.0 ts=2005/8/1 20:51 1706k 2004/08/02 C:\cygwin\bin\cygosp-4.dll - os=4.0 img=1.0 sys=4.0 "cygosp-4.dll" v0.0 ts=2004/8/2 15:51 326k 2004/08/02 C:\cygwin\bin\cygospgrove-0.dll - os=4.0 img=1.0 sys=4.0 "cygospgrove-0.dll" v0.0 ts=2004/8/2 17:07 1922k 2004/08/02 C:\cygwin\bin\cygostyle-0.dll - os=4.0 img=1.0 sys=4.0 "cygostyle-0.dll" v0.0 ts=2004/8/2 17:07 12k 2006/03/24 C:\cygwin\bin\cygpanel-8.dll - os=4.0 img=1.0 sys=4.0 "cygpanel-8.dll" v0.0 ts=2006/3/24 7:16 15k 2001/04/25 C:\cygwin\bin\cygpanel5.dll - os=4.0 img=1.0 sys=4.0 "cygpanel5.dll" v0.0 ts=2001/4/25 6:27 12k 2002/01/09 C:\cygwin\bin\cygpanel6.dll - os=4.0 img=1.0 sys=4.0 "cygpanel6.dll" v0.0 ts=2002/1/9 6:03 19k 2003/08/09 C:\cygwin\bin\cygpanel7.dll - os=4.0 img=1.0 sys=4.0 "cygpanel7.dll" v0.0 ts=2003/8/9 10:24 198k 2005/07/18 C:\cygwin\bin\cygpango-1.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygpango-1.0-0.dll" v0.0 ts=2005/7/18 12:26 134k 2005/07/18 C:\cygwin\bin\cygpangoft2-1.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygpangoft2-1.0-0.dll" v0.0 ts=2005/7/18 12:28 33k 2005/07/18 C:\cygwin\bin\cygpangowin32-1.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygpangowin32-1.0-0.dll" v0.0 ts=2005/7/18 12:29 36k 2005/07/18 C:\cygwin\bin\cygpangox-1.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygpangox-1.0-0.dll" v0.0 ts=2005/7/18 12:27 22k 2005/07/18 C:\cygwin\bin\cygpangoxft-1.0-0.dll - os=4.0 img=1.0 sys=4.0 "cygpangoxft-1.0-0.dll" v0.0 ts=2005/7/18 12:29 109k 2006/02/10 C:\cygwin\bin\cygpcre-0.dll - os=4.0 img=1.0 sys=4.0 "cygpcre-0.dll" v0.0 ts=2006/2/10 2:37 299k 2006/02/10 C:\cygwin\bin\cygpcrecpp-0.dll - os=4.0 img=1.0 sys=4.0 "cygpcrecpp-0.dll" v0.0 ts=2006/2/10 2:38 7k 2006/02/10 C:\cygwin\bin\cygpcreposix-0.dll - os=4.0 img=1.0 sys=4.0 "cygpcreposix-0.dll" v0.0 ts=2006/2/10 2:37 1249k 2005/12/30 C:\cygwin\bin\cygperl5_8.dll - os=4.0 img=1.0 sys=4.0 "cygperl5_8.dll" v0.0 ts=2005/12/30 1:48 52k 2006/06/06 C:\cygwin\bin\cygpgtypes.dll - os=4.0 img=1.0 sys=4.0 "cygpgtypes.dll" v0.0 ts=2006/6/6 7:36 1063k 2005/10/13 C:\cygwin\bin\cygplot-2.dll - os=4.0 img=1.0 sys=4.0 "cygplot-2.dll" v0.0 ts=2005/10/13 15:30 1229k 2005/10/13 C:\cygwin\bin\cygplotter-2.dll - os=4.0 img=1.0 sys=4.0 "cygplotter-2.dll" v0.0 ts=2005/10/13 16:22 224k 2005/07/11 C:\cygwin\bin\cygpng10.dll - os=4.0 img=1.0 sys=4.0 "cygpng10.dll" v0.0 ts=2005/7/12 0:45 230k 2005/07/11 C:\cygwin\bin\cygpng12.dll - os=4.0 img=1.0 sys=4.0 "cygpng12.dll" v0.0 ts=2005/7/12 0:50 170k 2002/01/21 C:\cygwin\bin\cygpng2.dll - os=4.0 img=1.0 sys=4.0 "cygpng2.dll" v0.0 ts=2002/1/21 1:05 22k 2002/06/09 C:\cygwin\bin\cygpopt-0.dll - os=4.0 img=1.0 sys=4.0 "cygpopt-0.dll" v0.0 ts=2002/6/9 6:45 94k 2006/02/17 C:\cygwin\bin\cygpq.dll - os=4.0 img=1.0 sys=4.0 "cygpq.dll" v0.0 ts=2006/2/17 7:21 575k 2004/10/10 C:\cygwin\bin\cygproj-0.dll - os=4.0 img=1.0 sys=4.0 "cygproj-0.dll" v0.0 ts=2004/10/10 23:57 514k 2005/10/14 C:\cygwin\bin\cygpstoedit-0.dll - os=4.0 img=1.0 sys=4.0 "cygpstoedit-0.dll" v0.0 ts=2005/10/14 16:05 6018k 2005/08/11 C:\cygwin\bin\cygqt-mt-3.dll - os=4.0 img=1.0 sys=4.0 "cygqt-mt-3.dll" v0.0 ts=2005/8/11 23:06 202k 2005/08/11 C:\cygwin\bin\cygqui-1.dll - os=4.0 img=1.0 sys=4.0 "cygqui-1.dll" v0.0 ts=2005/8/11 23:13 108k 2001/06/28 C:\cygwin\bin\cygreadline4.dll - os=4.0 img=1.0 sys=4.0 "cygreadline4.dll" v0.0 ts=2001/1/7 4:34 148k 2003/08/10 C:\cygwin\bin\cygreadline5.dll - os=4.0 img=1.0 sys=4.0 "cygreadline5.dll" v0.0 ts=2003/8/11 0:16 152k 2006/03/25 C:\cygwin\bin\cygreadline6.dll - os=4.0 img=1.0 sys=4.0 "cygreadline6.dll" v0.0 ts=2006/3/25 14:05 709k 2006/08/28 C:\cygwin\bin\cygruby18.dll - os=4.0 img=1.0 sys=4.0 "cygruby18.dll" v0.0 ts=2006/8/28 18:10 78k 2004/10/13 C:\cygwin\bin\cygsasl2-2.dll - os=4.0 img=1.0 sys=4.0 "cygsasl2-2.dll" v0.0 ts=2004/10/13 23:50 380k 2003/12/13 C:\cygwin\bin\cygsmi-2.dll - os=4.0 img=1.0 sys=4.0 "cygsmi-2.dll" v0.0 ts=2003/12/13 0:57 129k 2005/08/15 C:\cygwin\bin\cygspeex-1.dll - os=4.0 img=1.0 sys=4.0 "cygspeex-1.dll" v0.0 ts=2005/8/15 10:57 230k 2006/06/01 C:\cygwin\bin\cygssl-0.9.7.dll - os=4.0 img=1.0 sys=4.0 "cygssl-0.9.7.dll" v0.0 ts=2006/6/1 16:50 214k 2006/06/01 C:\cygwin\bin\cygssl-0.9.8.dll - os=4.0 img=1.0 sys=4.0 "cygssl-0.9.8.dll" v0.0 ts=2006/6/1 17:08 28k 2004/11/15 C:\cygwin\bin\cygstartup-notification-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygstartup-notification-1-0.dll" v0.0 ts=2004/11/15 3:59 140k 2006/07/14 C:\cygwin\bin\cygsvn_client-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_client-1-0.dll" v0.0 ts=2006/7/14 22:26 27k 2006/07/14 C:\cygwin\bin\cygsvn_delta-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_delta-1-0.dll" v0.0 ts=2006/7/14 22:17 23k 2006/07/14 C:\cygwin\bin\cygsvn_diff-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_diff-1-0.dll" v0.0 ts=2006/7/14 22:25 14k 2006/07/14 C:\cygwin\bin\cygsvn_fs-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_fs-1-0.dll" v0.0 ts=2006/7/14 22:20 127k 2006/07/14 C:\cygwin\bin\cygsvn_fs_base-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_fs_base-1-0.dll" v0.0 ts=2006/7/14 22:19 89k 2006/07/14 C:\cygwin\bin\cygsvn_fs_fs-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_fs_fs-1-0.dll" v0.0 ts=2006/7/14 22:17 9k 2006/07/14 C:\cygwin\bin\cygsvn_ra-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_ra-1-0.dll" v0.0 ts=2006/7/14 22:26 86k 2006/07/14 C:\cygwin\bin\cygsvn_ra_dav-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_ra_dav-1-0.dll" v0.0 ts=2006/7/14 22:26 20k 2006/07/14 C:\cygwin\bin\cygsvn_ra_local-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_ra_local-1-0.dll" v0.0 ts=2006/7/14 22:21 58k 2006/07/14 C:\cygwin\bin\cygsvn_ra_svn-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_ra_svn-1-0.dll" v0.0 ts=2006/7/14 22:21 106k 2006/07/14 C:\cygwin\bin\cygsvn_repos-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_repos-1-0.dll" v0.0 ts=2006/7/14 22:21 135k 2006/07/14 C:\cygwin\bin\cygsvn_subr-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_subr-1-0.dll" v0.0 ts=2006/7/14 22:17 28k 2006/07/14 C:\cygwin\bin\cygsvn_swig_perl-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_swig_perl-1-0.dll" v0.0 ts=2006/7/14 22:33 30k 2006/07/14 C:\cygwin\bin\cygsvn_swig_py-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_swig_py-1-0.dll" v0.0 ts=2006/7/14 22:30 38k 2006/07/14 C:\cygwin\bin\cygsvn_swig_ruby-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_swig_ruby-1-0.dll" v0.0 ts=2006/7/14 22:36 154k 2006/07/14 C:\cygwin\bin\cygsvn_wc-1-0.dll - os=4.0 img=1.0 sys=4.0 "cygsvn_wc-1-0.dll" v0.0 ts=2006/7/14 22:25 228k 2005/08/15 C:\cygwin\bin\cygt1-5.dll - os=4.0 img=1.0 sys=4.0 "cygt1-5.dll" v0.0 ts=2005/8/15 15:44 16k 2005/08/15 C:\cygwin\bin\cygt1x-5.dll - os=4.0 img=1.0 sys=4.0 "cygt1x-5.dll" v0.0 ts=2005/8/15 15:45 65k 2005/08/21 C:\cygwin\bin\cygtasn1-2.dll - os=4.0 img=1.0 sys=4.0 "cygtasn1-2.dll" v0.0 ts=2005/8/21 15:20 247k 2004/12/07 C:\cygwin\bin\cygtidy-0-99-0.dll - os=4.0 img=1.0 sys=4.0 "cygtidy-0-99-0.dll" v0.0 ts=2004/12/7 14:34 304k 2005/07/10 C:\cygwin\bin\cygtiff-5.dll - os=4.0 img=1.0 sys=4.0 "cygtiff-5.dll" v0.0 ts=2005/7/11 0:18 281k 2003/02/24 C:\cygwin\bin\cygtiff3.dll - os=4.0 img=1.0 sys=4.0 "cygtiff3.dll" v0.0 ts=2003/2/24 4:58 282k 2003/08/11 C:\cygwin\bin\cygtiff4.dll - os=4.0 img=1.0 sys=4.0 "cygtiff4.dll" v0.0 ts=2003/8/11 3:32 281k 2005/07/10 C:\cygwin\bin\cygtiffxx-5.dll - os=4.0 img=1.0 sys=4.0 "cygtiffxx-5.dll" v0.0 ts=2005/7/11 0:21 27k 2005/10/23 C:\cygwin\bin\cygungif-4.dll - os=4.0 img=1.0 sys=4.0 "cygungif-4.dll" v0.0 ts=2005/10/23 21:11 45k 2006/04/15 C:\cygwin\bin\cygusb0.dll - os=4.0 img=1.0 sys=4.0 "cygusb0.dll" v0.0 ts=2006/4/15 11:41 174k 2005/08/14 C:\cygwin\bin\cygvorbis-0.dll - os=4.0 img=1.0 sys=4.0 "cygvorbis-0.dll" v0.0 ts=2005/8/14 20:15 1125k 2005/08/14 C:\cygwin\bin\cygvorbisenc-2.dll - os=4.0 img=1.0 sys=4.0 "cygvorbisenc-2.dll" v0.0 ts=2005/8/14 20:20 42k 2005/08/14 C:\cygwin\bin\cygvorbisfile-3.dll - os=4.0 img=1.0 sys=4.0 "cygvorbisfile-3.dll" v0.0 ts=2005/8/14 20:20 154k 2004/08/11 C:\cygwin\bin\cygWand-6.dll - os=4.0 img=1.0 sys=4.0 "cygWand-6.dll" v0.0 ts=2004/8/11 7:04 314k 2005/08/10 C:\cygwin\bin\cygwmf-0-2-7.dll - os=4.0 img=1.0 sys=4.0 "cygwmf-0-2-7.dll" v0.0 ts=2005/8/10 14:54 150k 2005/08/10 C:\cygwin\bin\cygwmflite-0-2-7.dll - os=4.0 img=1.0 sys=4.0 "cygwmflite-0-2-7.dll" v0.0 ts=2005/8/10 14:53 152k 2006/02/08 C:\cygwin\bin\cygwnck-1-18.dll - os=4.0 img=1.0 sys=4.0 "cygwnck-1-18.dll" v0.0 ts=2006/2/8 3:10 35k 2006/07/14 C:\cygwin\bin\cygxdelta-2.dll - os=4.0 img=1.0 sys=4.0 "cygxdelta-2.dll" v0.0 ts=2006/7/14 14:48 2689k 2002/11/16 C:\cygwin\bin\cygxerces-c21.dll - os=4.0 img=1.0 sys=4.0 "cygxerces-c21.dll" v0.0 ts=2002/11/16 4:07 2984k 2003/02/07 C:\cygwin\bin\cygxerces-c22.dll - os=4.0 img=1.0 sys=4.0 "cygxerces-c22.dll" v0.0 ts=2003/2/7 18:50 3006k 2003/10/12 C:\cygwin\bin\cygxerces-c23.dll - os=4.0 img=1.0 sys=4.0 "cygxerces-c23.dll" v0.0 ts=2003/10/12 3:36 3520k 2003/12/16 C:\cygwin\bin\cygxerces-c24.dll - os=4.0 img=1.0 sys=4.0 "cygxerces-c24.dll" v0.0 ts=2003/12/16 19:45 3416k 2004/02/21 C:\cygwin\bin\cygxerces-c25.dll - os=4.0 img=1.0 sys=4.0 "cygxerces-c25.dll" v0.0 ts=2004/2/21 6:49 457k 2006/07/16 C:\cygwin\bin\cygXmHTML-0.dll - os=4.0 img=1.0 sys=4.0 "cygXmHTML-0.dll" v0.0 ts=2006/7/16 11:32 95k 2005/10/13 C:\cygwin\bin\cygxmi-0.dll - os=4.0 img=1.0 sys=4.0 "cygxmi-0.dll" v0.0 ts=2005/10/13 15:33 408k 2005/08/01 C:\cygwin\bin\cygxml-1.dll - os=4.0 img=1.0 sys=4.0 "cygxml-1.dll" v0.0 ts=2005/8/1 20:43 1065k 2006/06/09 C:\cygwin\bin\cygxml2-2.dll - os=4.0 img=1.0 sys=4.0 "cygxml2-2.dll" v0.0 ts=2006/6/9 20:10 45k 2006/04/18 C:\cygwin\bin\cygXpm-noX4.dll - os=4.0 img=1.0 sys=4.0 "cygXpm-noX4.dll" v0.0 ts=2006/4/18 6:06 193k 2006/06/09 C:\cygwin\bin\cygxslt-1.dll - os=4.0 img=1.0 sys=4.0 "cygxslt-1.dll" v0.0 ts=2006/6/9 21:15 65k 2005/08/23 C:\cygwin\bin\cygz.dll - os=4.0 img=1.0 sys=4.0 "cygz.dll" v0.0 ts=2005/8/23 3:03 78k 2005/11/10 C:\cygwin\bin\cygzvt-2.dll - os=4.0 img=1.0 sys=4.0 "cygzvt-2.dll" v0.0 ts=2005/11/10 21:06 1831k 2006/07/30 C:\cygwin\bin\cygwin1.dll - os=4.0 img=1.0 sys=4.0 "cygwin1.dll" v0.0 ts=2006/7/30 19:21 Cygwin DLL version info: DLL version: 1.5.21 DLL epoch: 19 DLL bad signal mask: 19005 DLL old termios: 5 DLL malloc env: 28 API major: 0 API minor: 156 Shared data: 4 DLL identifier: cygwin1 Mount registry: 2 Cygnus registry name: Cygnus Solutions Cygwin registry name: Cygwin Program options name: Program Options Cygwin mount registry name: mounts v2 Cygdrive flags: cygdrive flags Cygdrive prefix: cygdrive prefix Cygdrive default prefix: Build date: Sun Jul 30 14:21:47 EDT 2006 Shared id: cygwin1S4 26k 2005/09/21 C:\cygwin\usr\X11R6\bin\cygDtPrint-1.dll - os=4.0 img=1.0 sys=4.0 "cygDtPrint-1.dll" v0.0 ts=2005/9/22 0:31 20k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygfontenc-1.dll - os=4.0 img=1.0 sys=4.0 "cygfontenc-1.dll" v0.0 ts=2005/10/26 20:14 282k 2003/10/28 C:\cygwin\usr\X11R6\bin\cygfreetype-9.dll - os=4.0 img=1.0 sys=4.0 "cygfreetype-9.dll" v0.0 ts=2003/10/18 7:44 34k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygFS-6.dll - os=4.0 img=1.0 sys=4.0 "cygFS-6.dll" v0.0 ts=2005/10/26 18:52 357k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygGL-1.dll - os=4.0 img=1.0 sys=4.0 "cygGL-1.dll" v0.0 ts=2005/10/26 19:30 441k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygGLU-1.dll - os=4.0 img=1.0 sys=4.0 "cygGLU-1.dll" v0.0 ts=2005/10/26 19:48 140k 2004/08/06 C:\cygwin\usr\X11R6\bin\cygglut-3.dll - os=4.0 img=1.0 sys=4.0 "cygglut-3.dll" v0.0 ts=2004/8/6 15:43 74k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygICE-6.dll - os=4.0 img=1.0 sys=4.0 "cygICE-6.dll" v0.0 ts=2005/10/26 18:11 74k 2005/09/21 C:\cygwin\usr\X11R6\bin\cygMrm-2.dll - os=4.0 img=1.0 sys=4.0 "cygMrm-2.dll" v0.0 ts=2005/9/22 0:30 8k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygoldX-6.dll - os=4.0 img=1.0 sys=4.0 "cygoldX-6.dll" v0.0 ts=2005/10/26 18:09 1662k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygOSMesa-4.dll - os=4.0 img=1.0 sys=4.0 "cygOSMesa-4.dll" v0.0 ts=2005/10/26 19:32 28k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygSM-6.dll - os=4.0 img=1.0 sys=4.0 "cygSM-6.dll" v0.0 ts=2005/10/26 18:12 63k 2005/09/21 C:\cygwin\usr\X11R6\bin\cygUil-2.dll - os=4.0 img=1.0 sys=4.0 "cygUil-2.dll" v0.0 ts=2005/9/22 0:31 884k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygX11-6.dll - os=4.0 img=1.0 sys=4.0 "cygX11-6.dll" v0.0 ts=2005/10/26 18:07 8k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXau-6.dll - os=4.0 img=1.0 sys=4.0 "cygXau-6.dll" v0.0 ts=2005/10/26 17:31 250k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXaw-6.dll - os=4.0 img=1.0 sys=4.0 "cygXaw-6.dll" v0.0 ts=2005/10/26 18:33 354k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXaw-7.dll - os=4.0 img=1.0 sys=4.0 "cygXaw-7.dll" v0.0 ts=2005/10/26 18:39 360k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXaw-8.dll - os=4.0 img=1.0 sys=4.0 "cygXaw-8.dll" v0.0 ts=2005/10/26 18:45 275k 2004/01/13 C:\cygwin\usr\X11R6\bin\cygXaw3d-7.dll - os=4.0 img=1.0 sys=4.0 "cygXaw3d-7.dll" v0.0 ts=2004/1/13 22:17 7k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXcomposite-1.dll - os=4.0 img=1.0 sys=4.0 "cygXcomposite-1.dll" v0.0 ts=2005/10/26 20:04 30k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXcursor-1.dll - os=4.0 img=1.0 sys=4.0 "cygXcursor-1.dll" v0.0 ts=2005/10/26 20:03 8k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXdamage-1.dll - os=4.0 img=1.0 sys=4.0 "cygXdamage-1.dll" v0.0 ts=2005/10/26 20:02 16k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXdmcp-6.dll - os=4.0 img=1.0 sys=4.0 "cygXdmcp-6.dll" v0.0 ts=2005/10/26 17:34 7k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXevie-1.dll - os=4.0 img=1.0 sys=4.0 "cygXevie-1.dll" v0.0 ts=2005/10/26 20:01 50k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXext-6.dll - os=4.0 img=1.0 sys=4.0 "cygXext-6.dll" v0.0 ts=2005/10/26 18:14 15k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXfixes-3.dll - os=4.0 img=1.0 sys=4.0 "cygXfixes-3.dll" v0.0 ts=2005/10/26 20:02 56k 2004/03/11 C:\cygwin\usr\X11R6\bin\cygXft-1.dll - os=4.0 img=1.0 sys=4.0 "cygXft-1.dll" v0.0 ts=2003/11/18 1:42 63k 2004/03/23 C:\cygwin\usr\X11R6\bin\cygXft-2.dll - os=4.0 img=1.0 sys=4.0 "cygXft-2.dll" v0.0 ts=2004/3/23 22:20 26k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXi-6.dll - os=4.0 img=1.0 sys=4.0 "cygXi-6.dll" v0.0 ts=2005/10/26 18:48 121k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygxkbfile-1.dll - os=4.0 img=1.0 sys=4.0 "cygxkbfile-1.dll" v0.0 ts=2005/10/26 18:54 11k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygxkbui-1.dll - os=4.0 img=1.0 sys=4.0 "cygxkbui-1.dll" v0.0 ts=2005/10/26 18:54 1185k 2005/09/21 C:\cygwin\usr\X11R6\bin\cygXm-2.dll - os=4.0 img=1.0 sys=4.0 "cygXm-2.dll" v0.0 ts=2005/9/22 0:27 74k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXmu-6.dll - os=4.0 img=1.0 sys=4.0 "cygXmu-6.dll" v0.0 ts=2005/10/26 18:22 10k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXmuu-1.dll - os=4.0 img=1.0 sys=4.0 "cygXmuu-1.dll" v0.0 ts=2005/10/26 18:23 26k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXp-6.dll - os=4.0 img=1.0 sys=4.0 "cygXp-6.dll" v0.0 ts=2005/10/26 18:27 54k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXpm-4.dll - os=4.0 img=1.0 sys=4.0 "cygXpm-4.dll" v0.0 ts=2005/10/26 18:26 10k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXrandr-2.dll - os=4.0 img=1.0 sys=4.0 "cygXrandr-2.dll" v0.0 ts=2005/10/26 19:58 30k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXrender-1.dll - os=4.0 img=1.0 sys=4.0 "cygXrender-1.dll" v0.0 ts=2005/10/26 19:52 7k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXRes-1.dll - os=4.0 img=1.0 sys=4.0 "cygXRes-1.dll" v0.0 ts=2005/10/26 20:00 38k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygxrx-6.dll - os=4.0 img=1.0 sys=4.0 "cygxrx-6.dll" v0.0 ts=2005/10/26 21:13 24k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygxrxnest-6.dll - os=4.0 img=1.0 sys=4.0 "cygxrxnest-6.dll" v0.0 ts=2005/10/26 21:14 283k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXt-6.dll - os=4.0 img=1.0 sys=4.0 "cygXt-6.dll" v0.0 ts=2005/10/26 18:19 27k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXTrap-6.dll - os=4.0 img=1.0 sys=4.0 "cygXTrap-6.dll" v0.0 ts=2005/10/26 20:00 17k 2005/10/27 C:\cygwin\usr\X11R6\bin\cygXtst-6.dll - os=4.0 img=1.0 sys=4.0 "cygXtst-6.dll" v0.0 ts=2005/10/26 18:49 578k 2006/03/24 C:\cygwin\lib\lapack\cygblas.dll - os=4.0 img=1.0 sys=4.0 "cygblas.dll" v0.0 ts=2006/3/24 5:30 4887k 2006/03/24 C:\cygwin\lib\lapack\cyglapack.dll - os=4.0 img=1.0 sys=4.0 "cyglapack.dll" v0.0 ts=2006/3/24 5:30 No Cygwin services found. Cygwin Package Information Last downloaded files to: C:\Documents and Settings\irj\Desktop Last downloaded files from: http://www.mirrorservice.org/sites/sourceware.org/pub/cygwin Package Version _update-info-dir 00426-1 a2ps 4.13-1 aalib 1.4rc5-1 aalib-devel 1.4rc5-1 alternatives 1.3.20a-2 antiword 0.34-2 apache 1.3.33-2 apache2 2.2.2-1 apache2-devel 2.2.2-1 apache2-manual 2.2.2-1 apr 0.9.7-1 apr-util 0.9.7-1 apr1 1.2.7-1 aprutil1 1.2.7-1 ash 20040127-3 aspell 0.50.3-1 aspell-de 0.50.2-1 aspell-dev 0.50.3-1 aspell-doc 0.50.3-1 aspell-en 0.51.0-1 aspell-pl 0.50.2-1 astyle 1.15.3-3 atk 1.10.3-1 atk-devel 1.10.3-1 atk-doc 1.10.3-1 atk-runtime 1.10.3-1 audiofile 0.2.6-2 autoconf 2.59-2 autoconf2.1 2.13-1 autoconf2.5 2.59-2 automake 1.7.9-2 automake1.4 1.4p6-3 automake1.5 1.5-1 automake1.6 1.6.3-2 automake1.7 1.7.9-2 automake1.8 1.8.5-2 automake1.9 1.9.6-1 autossh 1.4a-1 base-files 3.7-1 base-passwd 2.2-1 bash 3.1-6 bash-completion 20060301-1 bashdb 3.1_0.05-1 bc 1.06-2 binutils 20060817-1 bison 2.3-1 boost 1.33.1-2 boost-devel 1.33.1-2 bsflite 0.81p2-1 byacc 1.9-1 bzip2 1.0.3-1 bzr 0.8.2-1 c-client 2002e-3 c3270 3.3.4p7-1 cabextract 1.1-1 cadaver 0.22.3-1 cairo 1.0.2-1 cairo-doc 1.0.2-1 catdoc 0.94.2-2 catgets 1.0-1 ccache 2.2-1 ccdoc 0.8.41-2 ccrypt 1.7-1 cgoban 1.9.14-2 check 0.9.2-2 checkx 0.1.0-1 chere 0.6-4 chkconfig 1.2.24h-1 clamav 0.88.4-1 clear 1.0-2 clisp 2.39-2 cmake 2.4.3-1 cocom 0.995-1 compface 1.5.2-1 coreutils 5.97-1 cpio 2.6-5 cppunit 1.9.14-1 cramfs 1.1-1 cron 3.0.1-19 crypt 1.1-1 ctags 5.6-1 ctetris 0.30-1 curl 7.15.4-1 curl-devel 7.15.4-1 cvs 1.11.17-1 cvsutils 0.2.3-1 cygport 0.2.4-1 cygrunsrv 1.17-1 cygutils 1.3.0-1 cygwin 1.5.21-2 cygwin-doc 1.4-4 cygwin-x-doc 1.0.4-1 cyrus-sasl 2.1.19-3 d 1.2.0-1 ddd 3.3.9-1 dejagnu 20021217-2 desktop-file-utils 0.10-1 diffstat 1.43-1 diffutils 2.8.7-1 distcc 2.18.3-1 dmalloc 5.4.2-2 docbook-xml412 4.1.2-1 docbook-xml42 4.2-3 docbook-xml43 4.3-1 docbook-xml44 4.4-1 docbook-xsl 1.69.1-1 doxygen 1.4.6-1 dpkg 1.10.4-2 e2fsimage 0.2.0-2 e2fsprogs 1.35-3 ec-fonts-mftraced 1.0.8-4 ed 0.2-1 editrights 1.01-1 ELFIO 1.0.2-1 emacs 21.2-13 emacs-el 21.2-13 emacs-X11 21.2-13 email 2.5.0-1 enscript 1.6.4-1 epstool 3.08-1 esound 0.2.36-1 exif 0.6.9-2 exim 4.63-1 expat 1.95.8-1 expect 20030128-1 fcgi 2.4.0-2 fetchmail 6.3.1-1 fftw3 3.0.1-2 fftw3-dev 3.0.1-2 fftw3-doc 3.0.1-2 figlet 2.2-1 file 4.16-1 findutils 4.3.0-2 flac 1.1.2-1 flac-devel 1.1.2-1 flex 2.5.4a-3 fltk 1.1.4-2 fontconfig 2.2.2-1 fortune 1.99.1-1 freeglut 2.2.0-1 freetype2 2.1.9-1 fvwm 2.4.7-3 gail 1.8.8-1 gawk 3.1.5-4 gcc 3.4.4-1 gcc-ada 3.4.4-1 gcc-core 3.4.4-1 gcc-g++ 3.4.4-1 gcc-g77 3.4.4-1 gcc-gdc 3.4.4-1 gcc-gpc 3.3.3-3 gcc-java 3.4.4-1 gcc-mingw 20040810-1 gcc-mingw-ada 20050522-1 gcc-mingw-core 20050522-1 gcc-mingw-g++ 20050522-1 gcc-mingw-g77 20050522-1 gcc-mingw-gdc 20050522-1 gcc-mingw-gpc 20040810-1 gcc-mingw-java 20050522-1 gcc-mingw-objc 20050522-1 gcc-objc 3.4.4-1 GConf2 2.14.0-2 GConf2-devel 2.14.0-2 GConf2-doc 2.14.0-2 gd 2.0.33-1 gdb 20060706-2 gdbm 1.8.3-7 gdk-pixbuf 0.22.0-4 gdk-pixbuf-devel 0.22.0-4 gdk-pixbuf-doc 0.22.0-4 geoip 1.3.14-1 gettext 0.14.5-1 gettext-devel 0.14.5-1 ghostscript 8.50-1 ghostscript-base 8.50-1 ghostscript-x11 8.50-1 glib 1.2.10-3 glib-devel 1.2.10-3 glib2 2.10.3-1 glib2-devel 2.10.3-1 glib2-doc 2.10.3-1 glib2-runtime 2.10.3-1 glitz 0.4.4-2 gmp 4.1.4-2 gnome-common 2.12.0-1 gnome-icon-theme 2.14.2-1 gnome-keyring 0.4.8-1 gnome-libs 1.4.2-3 gnome-libs-devel 1.4.2-3 gnome-libs-doc 1.4.2-3 gnome-mime-data 2.4.2-1 gnome-themes 2.14.2-1 gnome-vfs2 2.12.2-1 gnome-vfs2-devel 2.12.2-1 gnome-vfs2-doc 2.12.2-1 gnubg 0.14.3-1 gnugo 3.7.10-1 gnupg 1.4.2.1-1 gnuplot 4.0.0-1 gnutls 1.0.25-2 gnutls-devel 1.0.25-2 gnutls-doc 1.0.25-2 gperf 2.7.2-1 grace 5.1.19-1 GraphicsMagick 1.0.6-1 grep 2.5.1a-2 groff 1.18.1-2 gsl 1.8-1 gsl-apps 1.8-1 gsl-devel 1.8-1 gsl-doc 1.8-1 gtk+ 1.2.10-2 gtk+-devel 1.2.10-2 gtk-doc 1.5-1 gtk-engines 0.12-2 gtk2-x11 2.6.10-1 gtk2-x11-devel 2.6.10-1 gtk2-x11-doc 2.6.10-1 gtk2-x11-engines 2.6.7-1 gtk2-x11-runtime 2.6.10-1 gtypist 2.7-2 guile 1.6.7-4 guile-devel 1.6.7-4 guile-doc 1.6.7-4 gv 3.6.1-1 gvim 7.0.035-1 gzip 1.3.5-2 help2man 1.35.1-1 hexedit 1.2.10-1 hicolor-icon-theme 0.5-1 httptunnel 3.3-1 ImageMagick 6.0.4-1 imlib 1.9.14-3 indent 2.2.9-1 inetutils 1.3.2-35 initscripts 0.9-1 intltool 0.35.0-1 ioperm 0.4-1 irc 20010101-3 jasper 1.701.0-1 jbigkit 1.5-3 jgraph 8.3-1 jikes 1.22-1 joe 3.5-1 jpeg 6b-11 keychain 2.5.3.1-1 lablgtk2 2.4.0-2 lapack 3.0-5 lcms 1.14-1 less 381-1 lesstif 0.94.4-1 lftp 3.5.1-1 libaa1 1.4rc5-1 libao 0.8.6-1 libao-devel 0.8.6-1 libao2 0.8.6-1 libapr0 0.9.7-1 libapr1 1.2.7-1 libaprutil0 0.9.7-1 libaprutil1 1.2.7-1 libart_lgpl 1.4.2-3 libart_lgpl2 2.3.17-1 libaspell15 0.50.3-1 libaudiofile-devel 0.2.6-2 libaudiofile0 0.2.6-2 libbonobo2 2.14.0-1 libbonobo2-devel 2.14.0-1 libbonobo2-doc 2.14.0-1 libbonoboui2 2.10.1-1 libbz2_0 1.0.2-1 libbz2_1 1.0.3-1 libcairo2 1.0.2-1 libcharset1 1.9.2-2 libclamav-devel 0.88.4-1 libclamav1 0.88.4-1 libcroco06 0.6.1-1 libcroco06-devel 0.6.1-1 libcurl3 7.15.4-1 libdb4.1 4.1.25-1 libdb4.2 4.2.52-1 libdb4.3 4.3.28-1 libdb4.3-devel 4.3.28-1 libecpg5 8.1.4-2 libEMF 1.0.3-1 libEMF-devel 1.0.3-1 libEMF1 1.0.3-1 libesound-devel 0.2.36-1 libesound0 0.2.36-1 libexif 0.6.12-1 libexif10 0.6.9-2 libfcgi-devel 2.4.0-2 libfcgi0 2.4.0-2 libFLAC++5 1.1.2-1 libFLAC7 1.1.2-1 libfontconfig-devel 2.2.2-1 libfontconfig1 2.2.2-1 libfpx 1.2.0.12-1 libfreetype2-devel 2.1.9-1 libfreetype26 2.1.9-1 libgc 6.4-1 libgcrypt 1.2.1-1 libgd-devel 2.0.33-1 libgd2 2.0.33-1 libgdbm 1.8.0-5 libgdbm-devel 1.8.3-7 libgdbm3 1.8.3-3 libgdbm4 1.8.3-7 libgeotiff 1.2.2-1 libgeotiff-devel 1.2.2-1 libgeotiff1 1.2.2-1 libgettextpo0 0.14.5-1 libggi2 2.2.1-1 libggi2-devel 2.2.1-1 libggi2-display-aa 2.2.1-1 libggi2-display-file 2.2.1-1 libggi2-display-terminfo 2.2.1-1 libggi2-display-x 2.2.1-1 libggi2-samples 2.2.1-1 libggimisc2 2.2.1-1 libggimisc2-devel 2.2.1-1 libggimisc2-samples 2.2.1-1 libggiwmh0 0.3.1-1 libggiwmh0-devel 0.3.1-1 libggiwmh0-display-x 0.3.1-1 libggiwmh0-samples 0.3.1-1 libgii1 1.0.1-1 libgii1-devel 1.0.1-1 libgii1-input-x 1.0.1-1 libglade2 2.5.1-1 libglitz-glx1 0.4.4-2 libglitz1 0.4.4-2 libgnome 1.4.2-3 libgnome2 2.12.0.1-1 libgnome2-devel 2.12.0.1-1 libgnome2-doc 2.12.0.1-1 libgnomecanvas2 2.12.0-1 libgnomecanvas2-devel 2.12.0-1 libgnomecanvas2-doc 2.12.0-1 libgnomecanvaspixbuf 0.22.0-4 libgnomeprint22 2.10.3-1 libgnomeprintui22 2.10.2-1 libgnomesupport 1.4.2-3 libgnomeui 1.4.2-3 libgnomeui2 2.12.1-1 libgnomeui2-devel 2.12.1-1 libgnomeui2-doc 2.12.1-1 libgnorba 1.4.2-3 libgnutls11 1.0.25-2 libgpg-error 1.1-1 libGraphicsMagick-devel 1.0.6-1 libGraphicsMagick0 1.0.6-1 libgtkhtml2 2.6.3-2 libgtkhtml2-devel 2.6.3-2 libgtkxmhtml 1.4.2-3 libguile12 1.6.7-4 libguile16 1.7.2-3 libiconv 1.9.2-2 libiconv2 1.9.2-2 libIDL 0.5.17-2 libIDL2 0.8.6-1 libintl 0.10.38-3 libintl1 0.10.40-1 libintl2 0.12.1-3 libintl3 0.14.5-1 libjpeg62 6b-11 libjpeg6b 6b-8 libkpathsea3 2.0.2-15 libkpathsea4 3.0.0-3 libltdl3 1.5.22-1 libMagick-devel 6.0.4-1 libMagick6 6.0.4-1 libmcrypt 2.5.7-2 libmcrypt-devel 2.5.7-2 libmng 1.0.9-1 libncurses-devel 5.5-2 libncurses5 5.2-1 libncurses6 5.2-8 libncurses7 5.3-4 libncurses8 5.5-2 libneon24 0.24.7-2 libneon25 0.25.5-1 libnetpbm-devel 10.33-1 libnetpbm10 10.33-1 libogg 1.1.2-1 libogg-devel 1.1.2-1 libogg0 1.1.2-1 libOggFLAC++2 1.1.2-1 libOggFLAC3 1.1.2-1 libopencdk8 0.5.7-1 libopenldap2 2.1.25-1 libopenldap2_2_7 2.2.26-2 libpcre0 6.6-1 libpgtypes2 8.1.4-2 libplot2 2.4.1-1 libplotter2 2.4.1-1 libpng 1.2.8-2 libpng10 1.0.18-2 libpng10-devel 1.0.18-2 libpng12 1.2.8-2 libpng12-devel 1.2.8-2 libpng2 1.0.12-1 libpopt0 1.6.4-4 libpq3 7.4.5-1 libpq4 8.0.7-1 libproj-devel 4.4.8-1 libproj0 4.4.8-1 libreadline4 4.1-2 libreadline5 4.3-5 libreadline6 5.1-5 libsasl2 2.1.19-3 libsasl2-devel 2.1.19-3 libsigsegv 2.4-1 libsmi 0.4.2-1 libspeex1 1.1.10-1 libtasn1 0.2.15-1 libtiff-devel 3.7.3-1 libtiff3 3.6.0-2 libtiff4 3.6.0-5 libtiff5 3.7.3-1 libtool1.5 1.5.22-1 libungif 4.1.4-1 libungif4 4.1.4-1 libusb-win32 0.1.10.1-3 libvorbis 1.1.1-1 libvorbis-devel 1.1.1-1 libvorbis0 1.1.1-1 libvorbisenc2 1.1.1-1 libvorbisfile3 1.1.1-1 libwmf 0.2.8.4-1 libwnck 2.12.3-1 libwnck-devel 2.12.3-1 libwnck-doc 2.12.3-1 libwnck1_18 2.12.3-1 libxdelta2 1.1.3-3 libxerces-c21 2.1.0-1 libxerces-c22 2.2.0-1 libxerces-c23 2.3.0-4 libxerces-c24 2.4.0-4 libxerces-c25 2.5.0-1 libXft 2.1.6-1 libXft-devel 2.1.6-1 libXft1 1.0.0-1 libXft2 2.1.6-1 libxmi0 2.4.1-1 libxml 1.8.17-2 libxml2 2.6.26-1 libxml2-devel 2.6.26-1 libxml2-doc 2.6.26-1 libxml2-python 2.6.26-1 libxslt 1.1.17-1 libxslt-devel 1.1.17-1 libxslt-doc 1.1.17-1 libzvt 1.4.2-3 lighttpd 1.4.9-1 lilypond 2.6.4-1 lilypond-doc 2.6.4-1 links 0.99pre14-1 login 1.9-7 lynx 2.8.5-4 m4 1.4.6-1 make 3.81-1 man 1.5p-1 mathomatic 12.6.3-1 mc 4.6.1-2 mhash 0.9.2-1 mined 2000.12-3 mingw-bzip2 1.0.3-1 mingw-libbz2_1 1.0.3-1 mingw-runtime 3.10-1 mingw-zlib 1.2.2-2 minires 1.00-1 minires-devel 1.00-1 mktemp 1.5-3 monotone 0.29-1 mt 2.3.1-1 mtd 20050419-1 mutt 1.4.2.1i-1 naim 0.11.8.2-1 nano 1.2.2-1 nasm 0.98.39-1 ncftp 3.1.7-1 ncurses 5.5-2 ncurses-demo 5.5-2 nedit 5.5-1 neon 0.25.5-1 netcat 1.10-2 netpbm 10.33-1 netpbm-doc 10.33-1 nfs-server 2.3-4 Numeric 24.2-1 ocaml 3.08.1-1 octave 2.1.73-1 octave-doc 2.1.73-1 octave-forge 2006.03.17-1 octave-headers 2.1.73-1 octave-htmldoc 2.1.73-1 octave-info 2.1.73-1 octave-otags 2.1.73-1 openbox 0.99.1-4 opencdk 0.5.7-1 opengl 1.1.0-8 openjade 1.3.3-1 openldap 2.2.26-2 openldap-devel 2.2.26-2 OpenSP 1.5.1-1 openssh 4.3p2-3 openssl 0.9.8b-1 openssl-devel 0.9.8b-1 openssl097 0.9.7j-1 ORBit 0.5.17-2 ORBit-devel 0.5.17-2 ORBit2 2.14.0-1 ORBit2-devel 2.14.0-1 ORBit2-doc 2.14.0-1 orpie 1.4.3-1 pango 1.8.1-1 pango-devel 1.8.1-1 pango-doc 1.8.1-1 pango-runtime 1.8.1-1 par 1.52-1 patch 2.5.8-8 patchutils 0.2.31-1 pcre 6.6-1 pcre-devel 6.6-1 pcre-doc 6.6-1 pdksh 5.2.14-3 perl 5.8.7-5 perl-ExtUtils-Depends 0.205-1 perl-ExtUtils-PkgConfig 1.07-1 perl-libwin32 0.26-1 perl-Tk 804.027-4 perl-Win32-GUI 1.03-1 perl_manpages 5.8.7-5 pine 4.58-1 pinfo 0.6.8-1 ping 1.0-1 pkg-config 0.20-1 pkgconfig 0.17.2-3 ploticus 2.32-1 ploticus-common 2.32-1 ploticus-doc 2.32-1 plotutils 2.4.1-1 plotutils-devel 2.4.1-1 plotutils-doc 2.4.1-1 popt 1.6.4-4 postgresql 8.0.7-1 postgresql-client 8.0.7-1 pr3287 3.3.4p7-1 procmail 3.22-10 procps 3.2.6-1 proftpd 1.2.10-1 proj 4.4.8-1 psmisc 21.5-3 pstoedit 3.42-1 pstoedit-devel 3.42-1 psutils 1.17-1 pygtk2 2.6.3-1 pylibxml2 2.6.26-1 pylibxslt 1.1.17-1 python 2.4.3-1 qt3 3.3.4-2 qt3-bin 3.3.4-2 qt3-devel 3.3.4-2 qt3-doc 3.3.4-2 quilt 0.43-1 rcs 5.7-3 readline 5.1-5 rebase 2.4.3-1 rlwrap 0.24-1 robots 2.0-4 rpm 4.1-2 rpm-build 4.1-1 rpm-doc 4.1-1 rsync 2.6.6-1 ruby 1.8.5-1 run 1.1.10-1 rxvt 20050409-3 rxvt-unicode-common 7.7-4 rxvt-unicode-X 7.7-4 s3270 3.3.4p7-1 sed 4.1.5-2 shared-mime-info 0.17-1 sharutils 4.5.3-1 shutdown 1.7-1 singular-base 3.0.2-1 singular-help 3.0.2-1 singular-icons 3.0.2-1 singular-share 3.0.2-1 singular-surf 3.0.0-2 smartmontools 5.36-1 speex 1.1.10-1 speex-devel 1.1.10-1 splint 3.1.1-1 squid 2.4.STABLE7-1 ssmtp 2.60.9-3 startup-notification 0.8-1 stow 1.3.3-1 stunnel 4.14-2 subversion 1.3.2-1 subversion-apache2 1.3.2-1 subversion-devel 1.3.2-1 subversion-perl 1.3.2-1 subversion-python 1.3.2-1 subversion-ruby 1.3.2-1 suite3270 3.3.4p7-1 sunrpc 4.0-3 SWI-Prolog 5.2.6-1 swig 1.3.29-2 syslog-ng 1.6.11-1 sysvinit 2.84-4 t1lib 5.1.0-1 t1lib-x11 5.1.0-1 tar 1.15.91-1 tcl3270 3.3.4p7-1 tcltk 20060202-1 tcm 2.20-1 tcp_wrappers 7.6-1 tcsh 6.14.00-5 termcap 20050421-1 terminfo 5.5_20060323-1 tetex 3.0.0-3 tetex-base 3.0.0-3 tetex-bin 3.0.0-3 tetex-devel 3.0.0-3 tetex-doc 3.0.0-3 tetex-extra 3.0.0-3 tetex-tiny 3.0.0-3 tetex-x11 3.0.0-3 texi2html 1.76-1 texinfo 4.8-3 TeXmacs 1.0.6-1 tidy 041206-1 tiff 3.7.3-1 time 1.7-1 tin 1.8.2-1 tinyirc 1.1-1 tnef 1.3.4-1 transfig 3.2.4-2 ttcp 19980512-1 typespeed 0.4.4-2 tzcode 2005r-2 ucl 1.01-1 unison2.10.2 2.10.2-6 unison2.12.0 2.12.0-4 unison2.13 2.13.16-1 unison2.17 2.17.1-1 unison2.9.1 2.9.1-3 unison2.9.20 2.9.20-3 units 1.77-1 unzip 5.50-5 upx 1.24-1 util-linux 2.12r-2 uw-imap 2002e-3 uw-imap-imapd 2002e-3 uw-imap-util 2002e-3 vim 7.0.076-1 vorbis-tools 1.1.1-5 w32api 3.7-1 w3m 0.5.1-1 wget 1.10.2-1 which 1.7-1 whois 4.7.11-1 WindowMaker 0.90.0-2 WordNet 2.1-1 wtf 0.0.4-6 X-start-menu-icons 1.0.4-1 X-startup-scripts 1.0.11-1 x2x 1.30-2 x3270 3.3.4p7-1 Xaw3d 1.5D-5 xdelta 1.1.3-3 xdelta-devel 1.1.3-3 xemacs 21.4.19-1 xemacs-emacs-common 21.4.19-1 xemacs-mule-sumo 2005-12-08-1 xemacs-sumo 2005-12-08-1 xemacs-tags 21.4.19-1 xerces-c 2.5.0-1 xerces-c-devel 2.5.0-1 xerces-c-doc 2.5.0-1 xfig 3.2.4-6 xfig-lib 3.2.4-6 XFree86-lib-compat 4.3.0-2 xgraph 12.1-1 xinetd 2.3.9-1 XmHTML 1.1.7-2 xmlto 0.0.18-1 xmon 1.5.6-1 xorg-x11-base 6.8.99.901-1 xorg-x11-bin 6.8.99.901-1 xorg-x11-bin-dlls 6.8.99.901-1 xorg-x11-bin-lndir 6.8.99.901-1 xorg-x11-devel 6.8.99.901-1 xorg-x11-etc 6.8.99.901-1 xorg-x11-f100 6.8.99.901-1 xorg-x11-fcyr 6.8.99.901-1 xorg-x11-fenc 6.8.99.901-1 xorg-x11-fnts 6.8.99.901-1 xorg-x11-fscl 6.8.99.901-1 xorg-x11-fsrv 6.8.99.901-1 xorg-x11-libs-data 6.8.99.901-1 xorg-x11-man-pages 6.8.99.901-1 xorg-x11-man-pages-html 6.8.99.901-1 xorg-x11-nest 6.8.99.901-1 xorg-x11-vfb 6.8.99.901-1 xorg-x11-xwin 6.8.99.901-1 xorg-x11-xwin-gl 6.8.99.901-1 xpdf 3.01-2 xpm-nox 4.2.0-5 xsri 2.1.0-1 xterm 202-1 xwinwm 0.0.5-1 zip 2.3-6 zlib 1.2.3-1 zsh 4.3.2-1 Use -h to see help about each section -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From reply-to-list-only-lh-x@cygwin.com Wed Sep 13 17:05:00 2006 From: reply-to-list-only-lh-x@cygwin.com (Larry Hall (Cygwin X)) Date: Wed, 13 Sep 2006 17:05:00 -0000 Subject: XWIn.exe , compile In-Reply-To: <28291880.1158148341609.JavaMail.root@fep1> References: <28291880.1158148341609.JavaMail.root@fep1> Message-ID: <45083A67.8070701@cygwin.com> Iztok wrote: > Hi; > > I would like to re-compile the XWin.exe in order to make some changes for multi_window mode; > but I have a lot of troubles compiling the x-stuff; > Could you tell me, where I could find the compile-process description ? > Did you look at the FAQ? -- Larry Hall http://www.rfk.com RFK Partners, Inc. (508) 893-9779 - RFK Office 216 Dalton Rd. (508) 893-9889 - FAX Holliston, MA 01746 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From henry.thorpe@att.net Fri Sep 15 03:00:00 2006 From: henry.thorpe@att.net (henry.thorpe@att.net) Date: Fri, 15 Sep 2006 03:00:00 -0000 Subject: multi-window mode breaks USB drive auto-mount in Windows XP Message-ID: <091520060300.21652.450A173B0007D1DC0000549421603759640A9F9D01089BD2979D020A08@att.net> I tried Googling netnews and the web, the Cygwin website, and the mailing lists, but haven't seen anything about this. If I have Cygwin-X running in multi-window mode using this command in my startxwin.bat: start XWin -multiwindow -clipboard -emulate3buttons and I plug in my external USB drive (a WD600), the drive isn't completely mounted according to Windows Explorer. The drive doesn't show up under "My Computer", but I do see it under the "Safely Remove Hardware" tray icon, and I can CD in a command.com window to it. But, it only accepts 8.3 style filenames in the command shell. If I exit XWin, "safely remove" the drive, unplug the USB, and plug it back in, it mounts correctly, showing up in Explorer under "My Computer", supports proper FAT32 long filenames, etc. I can reliably reproduce this-- it's definitely a side effect of having XWin running. I'm at a total loss for why this is happening, or even how it can happen... does XWin intercept the "disk mounted" message from the USB drivers to Explorer and the volume subsystem, and somehow not pass it on? Note that this is on an HP nc6230 laptop, using just the built-in keyboard and trackpad (i.e., no external USB keyboard nor mouse). And, it's not just the USB drive-- I see the same behaviour with USB dongles, USB MP3 players, my 3G iPod, etc. Any suggestions on how to debug this, or any other insights will be greatly appreciated. TIA, Henry -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From egonpin@gmail.com Fri Sep 15 21:26:00 2006 From: egonpin@gmail.com (mr Ed) Date: Fri, 15 Sep 2006 21:26:00 -0000 Subject: Fwd: error with font in xTerm In-Reply-To: References: Message-ID: WinX.log (WW) /tmp mounted int textmode _XSERVTransmkdir: ERROR: euid != 0,directory /tmp/.X11-unix will not be created. (II) XF86Config is not supported (II) See http://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information winAdjustVideoModeShadowGDI - Using Windows display depth of 32 bits per pixel winAllocateFBShadowGDI - Creating DIB with width: 1024 height: 768 depth: 32 winInitVisualsShadowGDI - Masks 00ff0000 0000ff00 000000ff BPRGB 8 d 24 bpp 32 null screen fn ReparentWindow null screen fn RestackWindow InitQueue - Calling pthread_mutex_init InitQueue - pthread_mutex_init returned InitQueue - Calling pthread_cond_init InitQueue - pthread_cond_init returned winInitMultiWindowWM - Hello winMultiWindowXMsgProc - Hello winInitMultiWindowWM - Calling pthread_mutex_lock () winMultiWindowXMsgProc - Calling pthread_mutex_lock () MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shared memory support in the kernel (--) Setting autorepeat to delay=500, rate=31 (--) winConfigKeyboard - Layout: "0000040A" (0000040a) (--) Using preset keyboard for "Spanish (Spain, Traditional Sort)" (40a), type "4" (--) 3 mouse buttons found Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list! Fatal server error: could not open default font 'fixed' --------------------- Where, I can download, and how install this font to run xTerm, Release: 6.8.99.901-4 xwin started command-line : /usr/X11R6/bin/XWin -multiwindow -clipboard -silent-dup-error -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From lionelbuk@yahoo.co.uk Fri Sep 15 23:09:00 2006 From: lionelbuk@yahoo.co.uk (Lionel B) Date: Fri, 15 Sep 2006 23:09:00 -0000 Subject: Fwd: error with font in xTerm In-Reply-To: References: Message-ID: mr Ed wrote: > /.../ > > Fatal server error: > could not open default font 'fixed' See the Cygwin/X FAQ: http://x.cygwin.com/docs/faq/cygwin-x-faq.html#q-error-font-eof -- Lionel B -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From mattpout@radiouk.com Sat Sep 16 12:18:00 2006 From: mattpout@radiouk.com (Wyatt) Date: Sat, 16 Sep 2006 12:18:00 -0000 Subject: Best cumsshots on best lubricious Girls. Message-ID: <2192347667.20020125163720@zmvew> skillful Teen in haardcore ! http://yavrpsdhladek.com -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From pmajana1@yahoo.de Sat Sep 16 16:45:00 2006 From: pmajana1@yahoo.de (Princess Mary Ajana) Date: Sat, 16 Sep 2006 16:45:00 -0000 Subject: Hello! Message-ID: -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From saryazdi@mech.sharif.edu Sun Sep 17 10:02:00 2006 From: saryazdi@mech.sharif.edu (81302901) Date: Sun, 17 Sep 2006 10:02:00 -0000 Subject: stock error Message-ID: <3599.81.31.171.5.1158483959.squirrel@mech.sharif.edu> Hi, I'm tryin to install cygwin/X on WindowsXP. When I run startxwin.bat, I get error messages and Xwin doesn't start. Thanks for your help. Maryam In error massage box has been written: A fatal error has occurred and Cygwin/X will now exit. Please open /tmp/Xwin.log for more information. Below is the Xwin.log file: Vendor: The Cygwin/X Project Release:6.8.2.0-4 Contact:cygwin-xfree@cygwin.com Xwin was started with the following command- line: /usr/X11R6/bin/XWin- multiwindow-clipboard-silent-dup-error ddxProcessArgument - Initializing default screens winInitializeDefaultScreens - w 800 h 600 winInitializeDefaultScreens - Returning _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet _XSERVTransOpen: transport open failed for inet/home-i3h73d292v:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet _XSERVTransSocketOpenCOTSServer: Unable to open socket for local _XSERVTransOpen: transport open failed for local/home-i3h73d292v:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for local Fatal server error: Cannot establish any listening sockets - Make sure an X server isn't already running winDeinitMultiWindowWM - Noting shutdown in progress -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From reply-to-list-only-lh-x@cygwin.com Sun Sep 17 22:45:00 2006 From: reply-to-list-only-lh-x@cygwin.com (Larry Hall (Cygwin X)) Date: Sun, 17 Sep 2006 22:45:00 -0000 Subject: stock error In-Reply-To: <3599.81.31.171.5.1158483959.squirrel@mech.sharif.edu> References: <3599.81.31.171.5.1158483959.squirrel@mech.sharif.edu> Message-ID: <450DCFDE.1040908@cygwin.com> 81302901 wrote: > Hi, > I'm tryin to install cygwin/X on WindowsXP. > When I run startxwin.bat, I get error messages and Xwin doesn't start. > Thanks for your help. > Maryam > > In error massage box has been written: > > A fatal error has occurred and Cygwin/X will now exit. > Please open /tmp/Xwin.log for more information. > > Below is the Xwin.log file: > > Vendor: The Cygwin/X Project > Release:6.8.2.0-4 > Contact:cygwin-xfree@cygwin.com > Xwin was started with the following command- line: > > /usr/X11R6/bin/XWin- multiwindow-clipboard-silent-dup-error > > ddxProcessArgument - Initializing default screens > winInitializeDefaultScreens - w 800 h 600 > winInitializeDefaultScreens - Returning > _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet > _XSERVTransOpen: transport open failed for inet/home-i3h73d292v:0 > _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet > _XSERVTransSocketOpenCOTSServer: Unable to open socket for local > _XSERVTransOpen: transport open failed for local/home-i3h73d292v:0 > _XSERVTransMakeAllCOTSServerListeners: failed to open listener for local > > Fatal server error: > Cannot establish any listening sockets - Make sure an X server isn't > already running ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Does the above describe your situation? Perhaps you have already started the X server? -- Larry Hall http://www.rfk.com RFK Partners, Inc. (508) 893-9779 - RFK Office 216 Dalton Rd. (508) 893-9889 - FAX Holliston, MA 01746 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From saferber1@auna.com Mon Sep 18 07:47:00 2006 From: saferber1@auna.com (=?iso-8859-1?Q?Salvador_Fern=E1ndez?=) Date: Mon, 18 Sep 2006 07:47:00 -0000 Subject: Cygwin/X Message-ID: "A fatal error has ocurred and Cygwin/X will now exit." Please Help me. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From reply-to-list-only-lh-x@cygwin.com Mon Sep 18 14:46:00 2006 From: reply-to-list-only-lh-x@cygwin.com (Larry Hall (Cygwin X)) Date: Mon, 18 Sep 2006 14:46:00 -0000 Subject: Cygwin/X In-Reply-To: References: Message-ID: <450EB148.20409@cygwin.com> Salvador Fern??ndez wrote: > "A fatal error has ocurred and Cygwin/X will now exit." > Please Help me. Sure thing. Please read and follow the problem reporting guidelines found here: > Problem reports: http://cygwin.com/problems.html -- Larry Hall http://www.rfk.com RFK Partners, Inc. (508) 893-9779 - RFK Office 216 Dalton Rd. (508) 893-9889 - FAX Holliston, MA 01746 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From reply-to-list-only-lh-x@cygwin.com Tue Sep 19 15:00:00 2006 From: reply-to-list-only-lh-x@cygwin.com (Larry Hall (Cygwin X)) Date: Tue, 19 Sep 2006 15:00:00 -0000 Subject: fontconfig & imagemagick In-Reply-To: <195b3f1f0609182119t4b1f183fr2fe102ba61f965e2@mail.gmail.com> References: <195b3f1f0609182119t4b1f183fr2fe102ba61f965e2@mail.gmail.com> Message-ID: <45100603.9000700@cygwin.com> Wynfield Henman wrote: > While building ImageMagick ImageMagick-6.2.9, I found out the the > currently distributed > cygwin fontconfig version to be too old (version 2.2 or so). and two > years of developed have resulted in a (as of now) fontconfig-2.4.1. > > I found that this also builds well in the cygwin developement > environment and seems to be aware of installing the > usr/bin/cygfontconfig-1.dll files as well (As long as x-windows is not > running). > > New version of fontconfig as found at: http://fontconfig.org/release/ > > New version of ImageMagick found at: > ftp://ftp.imagemagick.org/pub/ImageMagick/ > > I don't know how to find out who is in charge of the fontcont, but it > should be updated for everyone. I don't beleive I found ImageMagick > in cygwin's respository, but is was a > straight process to build. This is really an X issue and should be discussed on the X list. I've reset the Reply-To, etc. to that list. Please follow-up there as you see fit. Also, right now, there is no X maintainer so if you're looking for updates, you'll need to find a volunteer or create the update yourself. If you do the latter, perhaps you would consider becoming the maintainer? :-) -- Larry Hall http://www.rfk.com RFK Partners, Inc. (508) 893-9779 - RFK Office 216 Dalton Rd. (508) 893-9889 - FAX Holliston, MA 01746 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Wolfram.Schwenzer@sac.aok.de Wed Sep 20 15:27:00 2006 From: Wolfram.Schwenzer@sac.aok.de (Schwenzer, Wolfram / DVIT-RZ-SYS) Date: Wed, 20 Sep 2006 15:27:00 -0000 Subject: German keybord in cygwin/x Message-ID: <4665E93F6B5A934C86C1281B9F1CF6DE117843@DS030101.sac.aok.de> Hi, in my xterm I can't use a german keybord, so I set a -kblayout de but I have the same anger. Can you help me? Best Rigards Wolfram _XSERVTransmkdir: ERROR: euid != 0,directory /tmp/.X11-unix will not be created. (II) XF86Config is not supported (II) See http://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information winAdjustVideoModeShadowGDI - Using Windows display depth of 16 bits per pixel winAllocateFBShadowGDI - Creating DIB with width: 1280 height: 1024 depth: 16 winInitVisualsShadowGDI - Masks 0000f800 000007e0 0000001f BPRGB 6 d 16 bpp 16 null screen fn ReparentWindow null screen fn RestackWindow InitQueue - Calling pthread_mutex_init InitQueue - pthread_mutex_init returned InitQueue - Calling pthread_cond_init InitQueue - pthread_cond_init returned winInitMultiWindowWM - Hello winInitMultiWindowWM - Calling pthread_mutex_lock () winMultiWindowXMsgProc - Hello winMultiWindowXMsgProc - Calling pthread_mutex_lock () MIT-SHM extension disabled due to lack of kernel support error opening security policy file /usr/X11R6/lib/X11/xserver/SecurityPolicy XFree86-Bigfont extension local-client optimization disabled due to lack of shared memory support in the kernel (--) Setting autorepeat to delay=500, rate=31 (--) winConfigKeyboard - Layout: "00000407" (00000407) (--) Using preset keyboard for "German (Germany)" (407), type "4" (++) XKB: layout: "de" (EE) Couldn't load XKB keymap, falling back to pre-XKB keymap (--) 3 mouse buttons found Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list! winInitMultiWindowWM - pthread_mutex_lock () returned. winProcEstablishConnection - Hello winInitClipboard () winClipboardProc - Hello winProcEstablishConnection - winInitClipboard returned. DetectUnicodeSupport - Windows NT/2000/XP winClipboardProc - DISPLAY=127.0.0.1:0.0 winMultiWindowXMsgProc - pthread_mutex_lock () returned. winInitMultiWindowWM - pthread_mutex_unlock () returned. winMultiWindowXMsgProc - pthread_mutex_unlock () returned. winInitMultiWindowWM - DISPLAY=127.0.0.1:0.0 winMultiWindowXMsgProc - DISPLAY=127.0.0.1:0.0 winClipboardProc - XOpenDisplay () returned and successfully opened the display. winMultiWindowXMsgProc - XOpenDisplay () returned and successfully opened the display. winInitMultiWindowWM - XOpenDisplay () returned and successfully opened the display. winDeinitMultiWindowWM - Noting shutdown in progress winClipboardProc - winClipboardFlushWindowsMessageQueue trapped WM_QUIT message, exiting main loop. winClipboardProc - XDestroyWindow succeeded. FreeFontPath: FPE "/usr/X11R6/lib/X11/fonts/misc/" refcount is 2, should be 1; fixing. winMultiWindowXMsgProcIOErrorHandler! winDeinitMultiWindowWM - Noting shutdown in progress -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From aptosca@esseff.org Wed Sep 20 17:51:00 2006 From: aptosca@esseff.org (aptosca) Date: Wed, 20 Sep 2006 17:51:00 -0000 Subject: 100% core utilization on dual core x64 Message-ID: <000001c6dcdd$24f113e0$9f01000a@windows.esseff.org> My desktop is a dual core Athlon running Windows XP Pro x64. On a pretty regular basis, Xwin seems to go into some kind of a tight loop, taking up 100% utilization of one core. I don't always notice when it happens right away so I'm not sure what is triggering it. I have seen it happen when pasting from xemacs to windows-native firefox. I've also seen it happen to xterm, though significantly less frequently. I'd say with X it happens every day or two. I have to shut down X and restart it. Never had this happen on a dual processor machine. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Paolo.Ciceroni@b-source.ch Thu Sep 21 14:15:00 2006 From: Paolo.Ciceroni@b-source.ch (Paolo.Ciceroni@b-source.ch) Date: Thu, 21 Sep 2006 14:15:00 -0000 Subject: Swiss German keyboard layout not recognized Message-ID: Hello, could you please tell me how to change the keyboard layout to Swiss German, which is correctly recognized by any application running within Windows except X/CygWin ? That's the relevant excerpt from my /tmp/XWin.log (--) winConfigKeyboard - Layout: "0000100C" (0000100c) (--) Using preset keyboard for "French (Switzerland)" (100c), type "4" Kind regards, Paolo. IMPORTANT: This e-mail transmission is intended for the named addressee(s) only. Its contents are private, confidential and protected from disclosure and should not be read, copied or disclosed by any other person. If you are not the intended recipient, we kindly ask you to notify the sender immediately by telephone (+41 (0)58 806 50 00), to redirect the message to the account "info@b-source.ch" and to delete this e-mail. E-mail transmissions may be intercepted, altered or read by unauthorized persons and may contain viruses. Therefore, it is recommended that you use regular mail or courier services for any information intended to be confidential. However, by sending us messages through e-mail, you authorize and instruct us to correspond by e-mail in the relevant matter. Thank you. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From V.Haisman@sh.cvut.cz Thu Sep 21 16:45:00 2006 From: V.Haisman@sh.cvut.cz (=?UTF-8?B?VsOhY2xhdiBIYWlzbWFu?=) Date: Thu, 21 Sep 2006 16:45:00 -0000 Subject: Cygwin X server is renicing remote tasks or something... Message-ID: <4512C1B8.5010004@sh.cvut.cz> Hi, I have noticed that always, sooner or later, all processes that use Cygwin X server to display anything end up with nice value 5. And that often means they get really choppy or completely impossible to use. It happens only when I use Cygwin X server, when I use some *nix and X server there then it works fine. If it has any relevance, I use X over SSH tunnel, SSH client being PuTTY. -- wilx -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 542 bytes Desc: OpenPGP digital signature URL: From M.Janczak@adbglobal.com Fri Sep 22 12:45:00 2006 From: M.Janczak@adbglobal.com (Mariusz Janczak) Date: Fri, 22 Sep 2006 12:45:00 -0000 Subject: startx failure, on fresh install References: Message-ID: Hi, I had the same problem and as you said there was not any response on this forum. But I have found solution that works for me. While running the cygwin setup you have an option that set the default text file type. While installation it have to be set as recommended - unix/binary. After installation you can change it to the DOS/text type. Best regards, -- Mariusz Janczak -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From pechtcha@cs.nyu.edu Sun Sep 24 14:11:00 2006 From: pechtcha@cs.nyu.edu (Igor Peshansky) Date: Sun, 24 Sep 2006 14:11:00 -0000 Subject: cygwin as X terminal(s) ? In-Reply-To: <200609241022.k8OAMvXa022538@sd.skydive1.com> References: <200609241022.k8OAMvXa022538@sd.skydive1.com> Message-ID: This is an X-specific question, and needs to go to the Cygwin/X list. Redirecting. On Sun, 24 Sep 2006, Richard Foulk wrote: > Aloha, > > As someone pointed out you can use Cygwin with X as an X terminal. > For remote admin of a linux/unix box that's pretty handy. By invoking > this command from Cygwin before starting X: > > x -broadcast > > you get a window that contains the whole remote desktop. Is there a way > to create multiple separate such windows/desktops on one Cygwin system? > That would be mighty handy for admining multiple machines. Try "X :0 -broadcast", "X :1 -broadcast", etc. For more information, see "man XWin". HTH, Igor -- http://cs.nyu.edu/~pechtcha/ |\ _,,,---,,_ pechtcha@cs.nyu.edu | igor@watson.ibm.com ZZZzz /,`.-'`' -. ;-;;,_ Igor Peshansky, Ph.D. (name changed!) |,4- ) )-,_. ,\ ( `'-' old name: Igor Pechtchanski '---''(_/--' `-'\_) fL a.k.a JaguaR-R-R-r-r-r-.-.-. Meow! "Las! je suis sot... -Mais non, tu ne l'es pas, puisque tu t'en rends compte." "But no -- you are no fool; you call yourself a fool, there's proof enough in that!" -- Rostand, "Cyrano de Bergerac" -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From pechtcha@cs.nyu.edu Sun Sep 24 14:16:00 2006 From: pechtcha@cs.nyu.edu (Igor Peshansky) Date: Sun, 24 Sep 2006 14:16:00 -0000 Subject: cygwin as X terminal(s) ? In-Reply-To: References: <200609241022.k8OAMvXa022538@sd.skydive1.com> Message-ID: On Sun, 24 Sep 2006, Igor Peshansky wrote: > This is an X-specific question, and needs to go to the Cygwin/X list. > Redirecting. > > On Sun, 24 Sep 2006, Richard Foulk wrote: > > > Aloha, > > > > As someone pointed out you can use Cygwin with X as an X terminal. > > For remote admin of a linux/unix box that's pretty handy. By invoking > > this command from Cygwin before starting X: > > > > x -broadcast > > > > you get a window that contains the whole remote desktop. Is there a way > > to create multiple separate such windows/desktops on one Cygwin system? > > That would be mighty handy for admining multiple machines. > > Try "X :0 -broadcast", "X :1 -broadcast", etc. For more information, see > "man XWin". Oops, sorry, I meant "man Xserver". Also, you might want to investigate the "-query" option instead of "-broadcast", to have finer grained control of which machines you'll be connecting to. Igor -- http://cs.nyu.edu/~pechtcha/ |\ _,,,---,,_ pechtcha@cs.nyu.edu | igor@watson.ibm.com ZZZzz /,`.-'`' -. ;-;;,_ Igor Peshansky, Ph.D. (name changed!) |,4- ) )-,_. ,\ ( `'-' old name: Igor Pechtchanski '---''(_/--' `-'\_) fL a.k.a JaguaR-R-R-r-r-r-.-.-. Meow! "Las! je suis sot... -Mais non, tu ne l'es pas, puisque tu t'en rends compte." "But no -- you are no fool; you call yourself a fool, there's proof enough in that!" -- Rostand, "Cyrano de Bergerac" -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From mp.griffin@qut.edu.au Mon Sep 25 06:02:00 2006 From: mp.griffin@qut.edu.au (mp.griffin@qut.edu.au) Date: Mon, 25 Sep 2006 06:02:00 -0000 Subject: Why don't I get an xterm ?? Message-ID: <20060925160033.AZA61002@mail-msgstore02.qut.edu.au> Hello, I've recently installed cygwin (with ALL of the x11 stuff) and am trying to open up an xterm, though to no success. I get a pile of messages from startXWin.sh (which to my novice eyes are unintelligible, there is something in there about XF86Config and I've tried reading the cygwin docs on this but the discussion is totally beyond me). Despite this when I type in xterm afterwards I get absolutely no response. I've attached the error messages below. Is there further information that you need, or do you have any advice ?? Mark ps. if it's at all relevant I'm also using a Swiss keyboard. ------------------------------------------------------- $ startxwin.sh & [1] 13024 Mark@marks-laptop ~ $ Welcome to the XWin X Server Vendor: The Cygwin/X Project Release: 6.8.99.901-4 Contact: cygwin-xfree@cygwin.com XWin was started with the following command line: XWin -multiwindow -clipboard -silent-dup-error _XSERVTransmkdir: ERROR: euid != 0,directory /tmp/.X11-unix will not be created. winValidateArgs - g_iNumScreens: 1 iMaxConsecutiveScreen: 1 (II) XF86Config is not supported (II) See http://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information winDetectSupportedEngines - Windows NT/2000/XP winDetectSupportedEngines - DirectDraw installed winDetectSupportedEngines - DirectDraw4 installed winDetectSupportedEngines - Returning, supported engines 00000007 winSetEngine - Multi Window or Rootless => ShadowGDI winAdjustVideoModeShadowGDI - Using Windows display depth of 32 bits per pixel winAllocateFBShadowGDI - Creating DIB with width: 1280 height: 800 depth: 32 winFinishScreenInitFB - Masks: 00ff0000 0000ff00 000000ff winInitVisualsShadowGDI - Masks 00ff0000 0000ff00 000000ff BPRGB 8 d 24 bpp 32 null screen fn ReparentWindow null screen fn RestackWindow InitQueue - Calling pthread_mutex_init InitQueue - pthread_mutex_init returned InitQueue - Calling pthread_cond_init InitQueue - pthread_cond_init returned winInitMultiWindowWM - Hello winInitMultiWindowWM - Calling pthread_mutex_lock () winMultiWindowXMsgProc - Hello winMultiWindowXMsgProc - Calling pthread_mutex_lock () MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shar ed memory support in the kernel (--) Setting autorepeat to delay=500, rate=31 (--) winConfigKeyboard - Layout: "00000807" (00000807) (--) Using preset keyboard for "German (Switzerland)" (807), type "4" Rules = "xorg" Model = "pc105" Layout = "de_CH" Variant = "(null)" Options = "(n ull)" 20 [main] XWin 13124 child_copy: linked dll data write copy failed, 0x97C00 0..0x97C040, done 0, windows pid 2277572, Win32 error 487 (EE) Couldn't load XKB keymap, falling back to pre-XKB keymap (--) 3 mouse buttons found Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from li st! winPointerWarpCursor - Discarding first warp: 640 400 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From stepoutcs@earthlink.net Mon Sep 25 21:03:00 2006 From: stepoutcs@earthlink.net (stepoutcs@earthlink.net) Date: Mon, 25 Sep 2006 21:03:00 -0000 Subject: Problems opening a window Message-ID: <24121622.1159218226958.JavaMail.root@elwamui-rustique.atl.sa.earthlink.net> Hello... I have attached the errors and xwin.log file from my server. I am running Windows Server 2003 64bit and am trying to obtain XWindows access to a LINUX server. I was able to get a window to open once, but it was grey...no login windows. Thanks for your help. -------------- next part -------------- A non-text attachment was scrubbed... Name: XWin errors.rtf Type: text/richtext Size: 1063 bytes Desc: not available URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From gpekhimenko@gmail.com Tue Sep 26 15:43:00 2006 From: gpekhimenko@gmail.com (Gennady Pekhimenko) Date: Tue, 26 Sep 2006 15:43:00 -0000 Subject: error Message-ID: <388179783.20060926114323@gmail.com> Hello, I've just installed cygwin with X11 and I have a non-regular error . -- Best regards, Gennady mailto:gpekhimenko@gmail.com -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: out.txt URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From KBarticle889459@aim.com Tue Sep 26 23:52:00 2006 From: KBarticle889459@aim.com (Charli Li) Date: Tue, 26 Sep 2006 23:52:00 -0000 Subject: Why don't I get an xterm ?? In-Reply-To: <20060925160033.AZA61002@mail-msgstore02.qut.edu.au> References: <20060925160033.AZA61002@mail-msgstore02.qut.edu.au> Message-ID: <4519BDE4.3020703@aim.com> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Mark just had to cough out the following stream of bytes from the specified email client, on 9/25/2006 2:02 AM: > Hello, > > I've recently installed cygwin (with ALL of the x11 stuff) and am trying to open up an xterm, though to no success. I get a pile of messages from startXWin.sh (which to my novice eyes are unintelligible, there is something in there about XF86Config and I've tried reading the cygwin docs on this but the discussion is totally beyond me). Despite this when I type in xterm afterwards I get absolutely no response. I've attached the error messages below. Is there further information that you need, or do you have any advice ?? > > Mark > > ps. if it's at all relevant I'm also using a Swiss keyboard. > > > ------------------------------------------------------- > [snip] Try using startxwin.bat, if that helps. These startup files (startxwin.bat; startxwin.sh; startx) are automatically configured to open an xterm after the window managers, XWin.exe, and all that other stuff. Also, try disabling security software, as that can sometimes interfere with Cygwin. HTH, - -- Charli - --- I'm FULL! -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.1 (Cygwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFGb3kKGyf4JaPChgRAraQAJ9NpsKxEWnLw0fu/DinKHzrxfhJ+gCglJ6F rpYD3u43Gt8YNYYn/JKjzaU= =MkrX -----END PGP SIGNATURE----- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From yhbrent@yahoo.com Wed Sep 27 13:52:00 2006 From: yhbrent@yahoo.com (captainmidnight) Date: Wed, 27 Sep 2006 13:52:00 -0000 Subject: cywin/x issues Message-ID: <6527151.post@talk.nabble.com> I have a client who has some gui applications running on a linux box. I am running MS Windows locally, so someone recommended that I try using cygwin. I installed the following packages this morning: 1) the entire base package 2) the entire x11 package 3) the inetutils and openssh packages (since I want to use ssh to connect to the remote machine). Basically, I followed the instructions here: http://x.cygwin.com/docs/ug/setup-cygwin-x-installing.html To ssh into the remote machine, I simply tried the included dos script /usr/X11R6/bin/startxwin.bat And once the xwin shell came up, I executed ssh -X -Y -l and entered my password and got into the remote machine. So far so good. I then tried playing around withsome x apps: xclock and xlogo worked fine (how could they go wrong?). But then I tried executing a medium complex program, gnome-system-monitor, and I ran into the following issues: 1) speed The first time that I played with the gui, it was unbelievably slow, to the point of being unusable. For instance, clicking on the File menu took 2-3 seconds to display the menu choices (which was simply Quit in this case). Later on in the afternoon when I played with the exact same app again, it executed more more quickly. Anyone have any idea why? I am guessing that likely my network connection (a Time Warner cable modem in NYC) was just getting a surge of traffic, or maybe had signal strength issues or something. Perhaps also the remote machine was having a surge of activity at the time (I forgot to check using top when it was problematic, my mistake). Or maybe the first time the program ran, it was downloading remote fonts or something that were cached locally for subsequent executions. I am aware that some personal firewalls are known to cause slow performance; see, for example, some of the posts here: http://blog.gmane.org/gmane.os.cygwin.xfree/day=20040824 I tried looking at my windows networking state with netstat but did not see the loopback issues reported above, so I do not think that my firewall (AVG) is the culprit. 2) warning messages Executing gnome-system-monitor caused a ton of errors like ** (gnome-system-monitor:30353): WARNING **: Unable load icon Failed to open file '/usr/share/pixmaps/ssh-askpass-gnome.png': No such file or directory to appear. I also saw 3 errors like (gnome-system-monitor:30353): Gtk-WARNING **: Attempting to sort on invalid type GdkPixbuf once gnome-system-monitor is up and running. A web search reveals that a few other people have these errors too, e.g.: http://lists.linuxcoding.com/rhl/2005/msg39096.html Is the reason for the above because the remote machine is using an old version of linux? Typing uname -a on the remote machine gave ... 2.6.11-1.1369_FC4smp #1 SMP Thu Jun 2 23:08:39 EDT 2005 i686 i686 i386 GNU/Linux Would FC5 cure these errors? 3) fonts The gnome-system-monitor app simply looks horrible. The best description that I can give is that it looks like when you take a screen shot and then save it as a jpeg file instead of as a png file: the text looks weird and sorta smeared. Did I simply fail to configure things properly? And is there a ready cure for the bad looking fonts? 4) XMing better? It looks like cygwin/x has been defunct for a long while now. In contrast, this website http://www.straightrunning.com/XmingNotes/ claims that the XMing program is actively developed and a lot better. Anyone have any experience with it versus cygwin/x? [I initially did not find a cygwin/x mailing list, and posted this message to the general Cygwin Users list. The only response that I got said that that was an inappropriate list, and to try this one. If this too is not the appropriate list, please let me know where to post it.] -- View this message in context: http://www.nabble.com/cywin-x-issues-tf2344901.html#a6527151 Sent from the cygwin-xfree mailing list archive at Nabble.com. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From tundra@tundraware.com Wed Sep 27 18:30:00 2006 From: tundra@tundraware.com (Tim Daneliuk) Date: Wed, 27 Sep 2006 18:30:00 -0000 Subject: WinXP Taskbar Overlaps Maximized xterm Message-ID: <451AC32B.7010204@tundraware.com> I have DAGS and looked at the cygwin FAQ but cannot seem to find this problem addressed, so ... When I maximize an xterm on my WinXP workstation, it gets sized so that the Windows taskbar slighty overlaps the bottom of the xterm window. This makes it very difficult to read the last line on the xterm display. Is there a fix/workaround for this? Tired-Of-Manually-Maximizing-My-xterm-Window-ly Yours, ---------------------------------------------------------------------------- Tim Daneliuk tundra@tundraware.com PGP Key: http://www.tundraware.com/PGP/ -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From r.berber@computer.org Wed Sep 27 19:30:00 2006 From: r.berber@computer.org (=?ISO-8859-1?Q?Ren=E9_Berber?=) Date: Wed, 27 Sep 2006 19:30:00 -0000 Subject: error In-Reply-To: <388179783.20060926114323@gmail.com> References: <388179783.20060926114323@gmail.com> Message-ID: Gennady Pekhimenko wrote: > I've just installed cygwin with X11 and I have a non-regular error . [snip] > 19 [main] X 12268 child_copy: linked dll data write copy failed, 0x3D3000..0x3D4020, done 0, windows pid 2277572, Win32 error 487 [snip] This message was just commented on the main Cygwin list as being the result of running McAfee antivirus. The solution is: disable the "buffer overrun protection" Ref: http://permalink.gmane.org/gmane.os.cygwin/82086 -- Ren? Berber -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From mp.griffin@qut.edu.au Wed Sep 27 20:08:00 2006 From: mp.griffin@qut.edu.au (mp.griffin@qut.edu.au) Date: Wed, 27 Sep 2006 20:08:00 -0000 Subject: Why don't I get an xterm ?? Message-ID: <20060928060607.AZB65217@mail-msgstore02.qut.edu.au> Hi Charlie, Thankyou very much for your email, I very very much appreciate it !!! I have now turned off Norton Internet Security and used startxwin.bat instead. I then set the DISPLAY variable (according to the host name that I get from "hostname". I then type xterm to no effect (ie. it appears in the ps list but there's still no window). I have also tried starting again (after killing the X Manager) and setting the DISPLAY variable first (just in case this made any difference), and I get exactly the same result. Help ?? Also (just as a yes/no/probably question as I know that this is off-topic) but I am also assuming that with a bit of trolling through the Norton stuff that I can find a better way of turning this off every time I want to use cygwin as opposed to doing it manually each time ?? Mark -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From reply-to-list-only-lh-x@cygwin.com Wed Sep 27 20:21:00 2006 From: reply-to-list-only-lh-x@cygwin.com (Larry Hall (Cygwin X)) Date: Wed, 27 Sep 2006 20:21:00 -0000 Subject: WinXP Taskbar Overlaps Maximized xterm In-Reply-To: <451AC32B.7010204@tundraware.com> References: <451AC32B.7010204@tundraware.com> Message-ID: <451ADD54.8060802@cygwin.com> Tim Daneliuk wrote: > I have DAGS and looked at the cygwin FAQ but cannot seem to find this > problem addressed, so ... > > When I maximize an xterm on my WinXP workstation, it gets sized so that > the Windows taskbar slighty overlaps the bottom of the xterm window. > This makes it very difficult to read the last line on the xterm display. > Is there a fix/workaround for this? How xterm maximizes is controlled by the window manager. If you're running in -multiwindow mode, you may want to consider using another window manager that can take into account the task bar (in that environment). An alternative would be to hide your task bar when you're not using it (keeping it always on top probably). -- Larry Hall http://www.rfk.com RFK Partners, Inc. (508) 893-9779 - RFK Office 216 Dalton Rd. (508) 893-9889 - FAX Holliston, MA 01746 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From tundra@tundraware.com Wed Sep 27 20:42:00 2006 From: tundra@tundraware.com (Tim Daneliuk) Date: Wed, 27 Sep 2006 20:42:00 -0000 Subject: WinXP Taskbar Overlaps Maximized xterm In-Reply-To: <451ADD54.8060802@cygwin.com> References: <451AC32B.7010204@tundraware.com> <451ADD54.8060802@cygwin.com> Message-ID: <451AE20B.9070204@tundraware.com> Larry Hall (Cygwin X) wrote: > Tim Daneliuk wrote: >> I have DAGS and looked at the cygwin FAQ but cannot seem to find this >> problem addressed, so ... >> >> When I maximize an xterm on my WinXP workstation, it gets sized so that >> the Windows taskbar slighty overlaps the bottom of the xterm window. >> This makes it very difficult to read the last line on the xterm display. >> Is there a fix/workaround for this? > > > How xterm maximizes is controlled by the window manager. If you're > running in -multiwindow mode, you may want to consider using another > window manager that can take into account the task bar (in that But doesn't -multiwindow mode effectively use the native WinXP window management system (that should know about its own task bar size)? > environment). An alternative would be to hide your task bar when > you're not using it (keeping it always on top probably). > > -- ---------------------------------------------------------------------------- Tim Daneliuk tundra@tundraware.com PGP Key: http://www.tundraware.com/PGP/ -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From tundra@tundraware.com Wed Sep 27 20:50:00 2006 From: tundra@tundraware.com (Tim Daneliuk) Date: Wed, 27 Sep 2006 20:50:00 -0000 Subject: WinXP Taskbar Overlaps Maximized xterm In-Reply-To: <451AE20B.9070204@tundraware.com> References: <451AC32B.7010204@tundraware.com> <451ADD54.8060802@cygwin.com> <451AE20B.9070204@tundraware.com> Message-ID: <451AE413.20600@tundraware.com> Tim Daneliuk wrote: > Larry Hall (Cygwin X) wrote: >> Tim Daneliuk wrote: >>> I have DAGS and looked at the cygwin FAQ but cannot seem to find this >>> problem addressed, so ... >>> >>> When I maximize an xterm on my WinXP workstation, it gets sized so that >>> the Windows taskbar slighty overlaps the bottom of the xterm window. >>> This makes it very difficult to read the last line on the xterm display. >>> Is there a fix/workaround for this? >> >> >> How xterm maximizes is controlled by the window manager. If you're >> running in -multiwindow mode, you may want to consider using another >> window manager that can take into account the task bar (in that > > But doesn't -multiwindow mode effectively use the native WinXP window > management system (that should know about its own task bar size)? > A bit more poking around and I discovered that this behavior is font-size sensitive. If I start xterm with either an -fn 10x20 argument or select the "Huge" font option once xterm has started, I get this problem of the xterm window being slightly overwritten by the taskbar when xterm is maximized. With smaller fonts, this problem disappears. I dunno if that helps figuring out what is going on or not ... -- ---------------------------------------------------------------------------- Tim Daneliuk tundra@tundraware.com PGP Key: http://www.tundraware.com/PGP/ -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From aaron@folmsbee.com Wed Sep 27 20:50:00 2006 From: aaron@folmsbee.com (Aaron) Date: Wed, 27 Sep 2006 20:50:00 -0000 Subject: Cygwin X fails to start References: <200609052200.k85LxxYa021597@flpvm23.prodigy.net> <44FF1905.3090207@hegemony.com> Message-ID: Michael A. LaBrot hegemony.com> writes: > > I, too, experienced the "could not open default font 'fixed'" problem > and the FAQ did not help me either. I was able to run X after changing > the Cygwin "Default Text File Type" from "DOS/text" to "Unix/binary" > during setup. Consider this a bug report. > Running installer again, selecting 'unix/binary' then reinstalling all fonts fixed this for me. Just changing to unix/binary didn't do the trick, needed to reinstall fonts after that as well. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From reply-to-list-only-lh-x@cygwin.com Wed Sep 27 21:04:00 2006 From: reply-to-list-only-lh-x@cygwin.com (Larry Hall (Cygwin X)) Date: Wed, 27 Sep 2006 21:04:00 -0000 Subject: WinXP Taskbar Overlaps Maximized xterm In-Reply-To: <451AE413.20600@tundraware.com> References: <451AC32B.7010204@tundraware.com> <451ADD54.8060802@cygwin.com> <451AE20B.9070204@tundraware.com> <451AE413.20600@tundraware.com> Message-ID: <451AE76A.80201@cygwin.com> Tim Daneliuk wrote: > Tim Daneliuk wrote: >> Larry Hall (Cygwin X) wrote: >>> Tim Daneliuk wrote: >>>> I have DAGS and looked at the cygwin FAQ but cannot seem to find this >>>> problem addressed, so ... >>>> >>>> When I maximize an xterm on my WinXP workstation, it gets sized so that >>>> the Windows taskbar slighty overlaps the bottom of the xterm window. >>>> This makes it very difficult to read the last line on the xterm >>>> display. >>>> Is there a fix/workaround for this? >>> >>> >>> How xterm maximizes is controlled by the window manager. If you're >>> running in -multiwindow mode, you may want to consider using another >>> window manager that can take into account the task bar (in that >> >> But doesn't -multiwindow mode effectively use the native WinXP window >> management system (that should know about its own task bar size)? >> > > > A bit more poking around and I discovered that this behavior is font-size > sensitive. If I start xterm with either an -fn 10x20 argument or select > the "Huge" font option once xterm has started, I get this problem of > the xterm window being slightly overwritten by the taskbar when xterm > is maximized. With smaller fonts, this problem disappears. I dunno > if that helps figuring out what is going on or not ... > > Can't say whether Windows is reporting the right size or not. There's a similar issue with KDE and xterm on RHEL 3. So it could also be an upstream problem in xterm, if it still exits in the current version. You might want to check that out. I don't see the problem with konsole. -- Larry Hall http://www.rfk.com RFK Partners, Inc. (508) 893-9779 - RFK Office 216 Dalton Rd. (508) 893-9889 - FAX Holliston, MA 01746 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From Fred.Stecher@ATK.COM Wed Sep 27 22:19:00 2006 From: Fred.Stecher@ATK.COM (Stecher, Fred) Date: Wed, 27 Sep 2006 22:19:00 -0000 Subject: XF86Config file Message-ID: <392A592C9667924E9AA094DAFBF67E2A02AFA2D9@mn07se02.atk.com> On CYGWIN is there a config file equivalent to XF86Config? Thanks, Fred Stecher -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From reply-to-list-only-lh-x@cygwin.com Wed Sep 27 23:18:00 2006 From: reply-to-list-only-lh-x@cygwin.com (Larry Hall (Cygwin X)) Date: Wed, 27 Sep 2006 23:18:00 -0000 Subject: XF86Config file In-Reply-To: <392A592C9667924E9AA094DAFBF67E2A02AFA2D9@mn07se02.atk.com> References: <392A592C9667924E9AA094DAFBF67E2A02AFA2D9@mn07se02.atk.com> Message-ID: <451B06B0.2020903@cygwin.com> Stecher, Fred wrote: > On CYGWIN is there a config file equivalent to XF86Config? How about '/etc/X11/xorg.conf'? -- Larry Hall http://www.rfk.com RFK Partners, Inc. (508) 893-9779 - RFK Office 216 Dalton Rd. (508) 893-9889 - FAX Holliston, MA 01746 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From dickey@his.com Thu Sep 28 00:41:00 2006 From: dickey@his.com (Thomas Dickey) Date: Thu, 28 Sep 2006 00:41:00 -0000 Subject: WinXP Taskbar Overlaps Maximized xterm In-Reply-To: <451AE76A.80201@cygwin.com> References: <451AC32B.7010204@tundraware.com> <451ADD54.8060802@cygwin.com> <451AE20B.9070204@tundraware.com> <451AE413.20600@tundraware.com> <451AE76A.80201@cygwin.com> Message-ID: <20060927203302.Y4258@mail101.his.com> On Wed, 27 Sep 2006, Larry Hall (Cygwin X) wrote: > There's a similar issue with KDE and xterm on RHEL 3. So it could also be "is" doesn't appear to be the right tense, since RHEL 3 was released a few years ago and is not the current version. iirc, cygwin's still distributing xterm patch #202, which is more recent than RHEL 3 (mid-2005). I made improvements to the layout in the latter part of 2005, so it would for example maximize as expected. On the other hand, it still doesn't re-maximize if the font size is changed while maximized. > an upstream problem in xterm, if it still exits in the current version. > You might want to check that out. I don't see the problem with konsole. given that konsole was developed as part of KDE, that's understandable... -- Thomas E. Dickey http://invisible-island.net ftp://invisible-island.net -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From tundra@tundraware.com Thu Sep 28 00:51:00 2006 From: tundra@tundraware.com (Tim Daneliuk) Date: Thu, 28 Sep 2006 00:51:00 -0000 Subject: WinXP Taskbar Overlaps Maximized xterm In-Reply-To: <20060927203302.Y4258@mail101.his.com> References: <451AC32B.7010204@tundraware.com> <451ADD54.8060802@cygwin.com> <451AE20B.9070204@tundraware.com> <451AE413.20600@tundraware.com> <451AE76A.80201@cygwin.com> <20060927203302.Y4258@mail101.his.com> Message-ID: <451B1C65.3010006@tundraware.com> Thomas Dickey wrote: > On Wed, 27 Sep 2006, Larry Hall (Cygwin X) wrote: > >> There's a similar issue with KDE and xterm on RHEL 3. So it could >> also be > > "is" doesn't appear to be the right tense, since RHEL 3 was released a few > years ago and is not the current version. > > iirc, cygwin's still distributing xterm patch #202, which is more recent > than RHEL 3 (mid-2005). I made improvements to the layout in the latter > part of 2005, so it would for example maximize as expected. On the > other hand, it still doesn't re-maximize if the font size is changed > while maximized. Well, the problem I am seeing is when I initially maximize xterm with a large font already selected. (I would not expect it necessarily to work properly if I changed fonts once already maximized.) > >> an upstream problem in xterm, if it still exits in the current version. >> You might want to check that out. I don't see the problem with konsole. > > given that konsole was developed as part of KDE, that's understandable... > -- ---------------------------------------------------------------------------- Tim Daneliuk tundra@tundraware.com PGP Key: http://www.tundraware.com/PGP/ -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From r.berber@computer.org Thu Sep 28 01:09:00 2006 From: r.berber@computer.org (=?ISO-8859-1?Q?Ren=E9_Berber?=) Date: Thu, 28 Sep 2006 01:09:00 -0000 Subject: XF86Config file In-Reply-To: <451B06B0.2020903@cygwin.com> References: <392A592C9667924E9AA094DAFBF67E2A02AFA2D9@mn07se02.atk.com> <451B06B0.2020903@cygwin.com> Message-ID: Larry Hall (Cygwin X) wrote: > Stecher, Fred wrote: >> On CYGWIN is there a config file equivalent to XF86Config? > > How about '/etc/X11/xorg.conf'? Where did that file came from? Its not from a Cygwin installation (just checked http://cygwin.com/cgi-bin2/package-grep.cgi?grep=xorg.conf). The answer to the OP is no (as shown in the messages when X starts and stored in /tmp/XWin.log: "(II) XF86Config is not supporte"), but look at the comments in /usr/X11R6/bin/startxwin.bat (i.e. you can specify your own -- don't know if it works but that's what the file says). -- Ren? Berber -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From reply-to-list-only-lh-x@cygwin.com Thu Sep 28 01:33:00 2006 From: reply-to-list-only-lh-x@cygwin.com (Larry Hall (Cygwin X)) Date: Thu, 28 Sep 2006 01:33:00 -0000 Subject: WinXP Taskbar Overlaps Maximized xterm In-Reply-To: <20060927203302.Y4258@mail101.his.com> References: <451AC32B.7010204@tundraware.com> <451ADD54.8060802@cygwin.com> <451AE20B.9070204@tundraware.com> <451AE413.20600@tundraware.com> <451AE76A.80201@cygwin.com> <20060927203302.Y4258@mail101.his.com> Message-ID: <451B2655.8010000@cygwin.com> Thomas Dickey wrote: > On Wed, 27 Sep 2006, Larry Hall (Cygwin X) wrote: > >> There's a similar issue with KDE and xterm on RHEL 3. So it could >> also be > > "is" doesn't appear to be the right tense, since RHEL 3 was released a few > years ago and is not the current version. > > iirc, cygwin's still distributing xterm patch #202, which is more recent > than RHEL 3 (mid-2005). I made improvements to the layout in the latter > part of 2005, so it would for example maximize as expected. On the > other hand, it still doesn't re-maximize if the font size is changed > while maximized. > >> an upstream problem in xterm, if it still exits in the current version. >> You might want to check that out. I don't see the problem with konsole. > > given that konsole was developed as part of KDE, that's understandable... > Don't get too hung up on my references to KDE and RHEL 3. They were what I had available at the time to test and respond with. The points I wanted to make were that this issue isn't necessarily a Cygwin-specific one and that there may be fixes available in later versions of these tools as a result. -- Larry Hall http://www.rfk.com RFK Partners, Inc. (508) 893-9779 - RFK Office 216 Dalton Rd. (508) 893-9889 - FAX Holliston, MA 01746 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From ajcaruana@gmail.com Thu Sep 28 09:33:00 2006 From: ajcaruana@gmail.com (Alan James Caruana) Date: Thu, 28 Sep 2006 09:33:00 -0000 Subject: XWin Message-ID: Hi, I have thoroughly searched through the FAQ and could not find any solution to my problem. First, can XWin run directly in Windows (not through Cygxwin) ? If it can, obviously it would have to be compiled again. Secondly, my main problem is that I have compiled XWin under Windows. but it is not starting due to a fonts problem. It is giving the problem I saw in many posts of this list i.e. Fatal server error: could not open default font 'fixed' Although I saw this error in many posts, none of the posts I saw said that someone was trying to compile it and/or run it directly from windows. Any help would be greatly appreciated. Regards Alan Caruana -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From dickey@his.com Thu Sep 28 10:01:00 2006 From: dickey@his.com (Thomas Dickey) Date: Thu, 28 Sep 2006 10:01:00 -0000 Subject: WinXP Taskbar Overlaps Maximized xterm In-Reply-To: <451B1C65.3010006@tundraware.com> References: <451AC32B.7010204@tundraware.com> <451ADD54.8060802@cygwin.com> <451AE20B.9070204@tundraware.com> <451AE413.20600@tundraware.com> <451AE76A.80201@cygwin.com> <20060927203302.Y4258@mail101.his.com> <451B1C65.3010006@tundraware.com> Message-ID: <20060928055635.L98651@mail101.his.com> On Wed, 27 Sep 2006, Tim Daneliuk wrote: > Thomas Dickey wrote: >> On Wed, 27 Sep 2006, Larry Hall (Cygwin X) wrote: >> >>> There's a similar issue with KDE and xterm on RHEL 3. So it could also be >> >> "is" doesn't appear to be the right tense, since RHEL 3 was released a few >> years ago and is not the current version. >> >> iirc, cygwin's still distributing xterm patch #202, which is more recent >> than RHEL 3 (mid-2005). I made improvements to the layout in the latter >> part of 2005, so it would for example maximize as expected. On the other >> hand, it still doesn't re-maximize if the font size is changed while >> maximized. > > Well, the problem I am seeing is when I initially maximize xterm with a > large font already selected. (I would not expect it necessarily to work > properly if I changed fonts once already maximized.) I tested xterm #220 last night to check (since I had not looked at cygwin in particular when making the layout fixes), and it did not overlap the taskbar. That's the current version on my ftp site. I'm working on #221, for a fix which does not appear to affect cygwin, so #220 is probably what you should use. That's source - configuring/compiling it is not that hard... -- Thomas E. Dickey http://invisible-island.net ftp://invisible-island.net -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From kris.thielemans@csc.mrc.ac.uk Thu Sep 28 14:56:00 2006 From: kris.thielemans@csc.mrc.ac.uk (Kris Thielemans) Date: Thu, 28 Sep 2006 14:56:00 -0000 Subject: Problem with xterm menu displaying too small Message-ID: Hi On one of the PCs that I use, I have a problem that the menu that xterm displays if you control-click (left,middle or right), e.g. to change the font-size, is too small. It shows only 2 lines, and not all characters. Anyone knows how to fix this? Thanks Kris PS: I'm pretty up-to-date with cygwin and xfree. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From romain.r.clement@bnpparibas.com Thu Sep 28 15:31:00 2006 From: romain.r.clement@bnpparibas.com (romain.r.clement@bnpparibas.com) Date: Thu, 28 Sep 2006 15:31:00 -0000 Subject: [INFO][ENGINE] Xwin + clipboard & nested calls Message-ID: Hello, I've just noticed something by running the following : # XWin -multiwindow -clipboard -engine 2 -silent-dup-error & # export DISPLAY=localhost:0.0 # xhost +inet: ... The X/Cygwin X server runs smoothly just as wanted without any warning message anymore. I use W32/XP PRO SP1 on HP Compaq with PIV@2.80GHz for work purposes. Before I got a bunch of the same message displaying ":winClipboardWindowProc - WM_DRAWCLIPBOARD - Nested calls detected. Bailing." in the cygterm emulator. Maybe, this piece of information would help you to make your FAQ more accurate. Best regards, Romain. This message and any attachments (the "message") is intended solely for the addressees and is confidential. If you receive this message in error, please delete it and immediately notify the sender. Any use not in accord with its purpose, any dissemination or disclosure, either whole or partial, is prohibited except formal approval. The internet can not guarantee the integrity of this message. BNP PARIBAS (and its subsidiaries) shall (will) not therefore be liable for the message if modified. --------------------------------------------- Ce message et toutes les pieces jointes (ci-apres le "message") sont etablis a l'intention exclusive de ses destinataires et sont confidentiels. Si vous recevez ce message par erreur, merci de le detruire et d'en avertir immediatement l'expediteur. Toute utilisation de ce message non conforme a sa destination, toute diffusion ou toute publication, totale ou partielle, est interdite, sauf autorisation expresse. L'internet ne permettant pas d'assurer l'integrite de ce message, BNP PARIBAS (et ses filiales) decline(nt) toute responsabilite au titre de ce message, dans l'hypothese ou il aurait ete modifie. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From reply-to-list-only-lh-x@cygwin.com Thu Sep 28 16:07:00 2006 From: reply-to-list-only-lh-x@cygwin.com (Larry Hall (Cygwin X)) Date: Thu, 28 Sep 2006 16:07:00 -0000 Subject: XWin In-Reply-To: References: Message-ID: <451BF33E.6020203@cygwin.com> Alan James Caruana wrote: > Hi, > > I have thoroughly searched through the FAQ and could not find any > solution to my problem. First, can XWin run directly in Windows (not > through Cygxwin) ? If it can, obviously it would have to be compiled > again. That's Xming. Different project. See > Secondly, my main problem is that I have compiled XWin under Windows. > but it is not starting due to a fonts problem. It is giving the > problem I saw in many posts of this list i.e. > > Fatal server error: > could not open default font 'fixed' > > Although I saw this error in many posts, none of the posts I saw said > that someone was trying to compile it and/or run it directly from > windows. You mean you're not using Cygwin? If that's the case, you're off-topic for this list. Try Xming. -- Larry Hall http://www.rfk.com RFK Partners, Inc. (508) 893-9779 - RFK Office 216 Dalton Rd. (508) 893-9889 - FAX Holliston, MA 01746 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From dickey@his.com Thu Sep 28 16:30:00 2006 From: dickey@his.com (Thomas Dickey) Date: Thu, 28 Sep 2006 16:30:00 -0000 Subject: Problem with xterm menu displaying too small In-Reply-To: <20060928145620.456A94F8C24@smtp502.his.com> References: <20060928145620.456A94F8C24@smtp502.his.com> Message-ID: <20060928122930.A60235@mail101.his.com> On Thu, 28 Sep 2006, Kris Thielemans wrote: > Hi > > On one of the PCs that I use, I have a problem that the menu that xterm > displays if you control-click (left,middle or right), e.g. to change the > font-size, is too small. It shows only 2 lines, and not all characters. http://invisible-island.net/xterm/xterm.faq.html#tiny_menus -- Thomas E. Dickey http://invisible-island.net ftp://invisible-island.net -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From tundra@tundraware.com Thu Sep 28 19:15:00 2006 From: tundra@tundraware.com (Tim Daneliuk) Date: Thu, 28 Sep 2006 19:15:00 -0000 Subject: New Bash Release Broken? Message-ID: <451C1F5D.2050001@tundraware.com> It is my habit to update the entire cygwin installation at least once a week. Earlier today, I updated and got the new version of bash, 3.1.17(8). It appears broken. The .profile I have happily used for years gives it fits (the same .profile works fine if I invoke ksh instead of bash) and other shell scripts that used to work, no longer do. The shell typically produces errors like: : invalid option name ': not a valid identifier : command not found : command not found : command not found : command not found : command not found -bash: /cygdrive/c/usr/home/tundra/.profile: line 15: syntax error near unexpect'd token `{ 'bash: /cygdrive/c/usr/home/tundra/.profile: line 15: `{ In this case, the "script" was .profile and the first 15 lines look like this: set -o ignoreeof export ignoreeof export EDITOR=emacs export MACHINE=`uname -n` export PAGER=less export TZ=CST6CDT TERM=vt100 # Function definitions function PyD { cd $HOME/Dev/python/$1 } Ideas anyone? Is there a change to bash syntax and I just didn't get the memo? -- ---------------------------------------------------------------------------- Tim Daneliuk tundra@tundraware.com PGP Key: http://www.tundraware.com/PGP/ -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From reply-to-list-only-lh-x@cygwin.com Thu Sep 28 19:44:00 2006 From: reply-to-list-only-lh-x@cygwin.com (Larry Hall (Cygwin X)) Date: Thu, 28 Sep 2006 19:44:00 -0000 Subject: New Bash Release Broken? In-Reply-To: <451C1F5D.2050001@tundraware.com> References: <451C1F5D.2050001@tundraware.com> Message-ID: <451C2620.6030400@cygwin.com> Tim Daneliuk wrote: > It is my habit to update the entire cygwin installation at least once a > week. > Earlier today, I updated and got the new version of bash, 3.1.17(8). > It appears broken. The .profile I have happily used for years gives it > fits (the same .profile works fine if I invoke ksh instead of bash) and > other shell scripts that used to work, no longer do. The shell typically > produces errors like: > > : invalid option name > ': not a valid identifier > : command not found > : command not found > : command not found > : command not found > : command not found > -bash: /cygdrive/c/usr/home/tundra/.profile: line 15: syntax error near > unexpect'd token `{ > 'bash: /cygdrive/c/usr/home/tundra/.profile: line 15: `{ > > In this case, the "script" was .profile and the first 15 lines look > like this: > > set -o ignoreeof > export ignoreeof > export EDITOR=emacs > export MACHINE=`uname -n` > export PAGER=less > export TZ=CST6CDT > > > TERM=vt100 > > > # Function definitions > > function PyD > { > cd $HOME/Dev/python/$1 > } > > > Ideas anyone? Is there a change to bash syntax and I just didn't get > the memo? That's one way to put it. -- Larry Hall http://www.rfk.com RFK Partners, Inc. (508) 893-9779 - RFK Office 216 Dalton Rd. (508) 893-9889 - FAX Holliston, MA 01746 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From tundra@tundraware.com Thu Sep 28 19:50:00 2006 From: tundra@tundraware.com (Tim Daneliuk) Date: Thu, 28 Sep 2006 19:50:00 -0000 Subject: New Bash Release Broken? In-Reply-To: <451C2620.6030400@cygwin.com> References: <451C1F5D.2050001@tundraware.com> <451C2620.6030400@cygwin.com> Message-ID: <451C2775.5090804@tundraware.com> Larry Hall (Cygwin X) wrote: >> >> Ideas anyone? Is there a change to bash syntax and I just didn't get >> the memo? > > > That's one way to put it. > > > > That was it all right ... guess I better subscribe to -announce ... and thanks for the prompt reply ... -- ---------------------------------------------------------------------------- Tim Daneliuk tundra@tundraware.com PGP Key: http://www.tundraware.com/PGP/ -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From reply-to-list-only-lh-x@cygwin.com Thu Sep 28 20:01:00 2006 From: reply-to-list-only-lh-x@cygwin.com (Larry Hall (Cygwin X)) Date: Thu, 28 Sep 2006 20:01:00 -0000 Subject: New Bash Release Broken? In-Reply-To: <451C2775.5090804@tundraware.com> References: <451C1F5D.2050001@tundraware.com> <451C2620.6030400@cygwin.com> <451C2775.5090804@tundraware.com> Message-ID: <451C29F8.5020704@cygwin.com> Tim Daneliuk wrote: > Larry Hall (Cygwin X) wrote: > > >>> >>> Ideas anyone? Is there a change to bash syntax and I just didn't get >>> the memo? >> >> >> That's one way to put it. >> >> >> >> > > That was it all right ... guess I better subscribe to -announce ... > and thanks for the prompt reply ... > No problem. Thanks for timing your email so well with my email reading time-slice. ;-) Subscribing to the announce list is a great idea. Announcements also get forwarded to the main list but if you just want to keep on top of announcements, the announce list is a nice, low-volume way to do it. -- Larry Hall http://www.rfk.com RFK Partners, Inc. (508) 893-9779 - RFK Office 216 Dalton Rd. (508) 893-9889 - FAX Holliston, MA 01746 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From c.lanconelli@isac.cnr.it Thu Sep 28 22:34:00 2006 From: c.lanconelli@isac.cnr.it (Christian Lanconelli) Date: Thu, 28 Sep 2006 22:34:00 -0000 Subject: xterm does't start Message-ID: <40496.81.208.83.219.1159482823.squirrel@mail.isac.cnr.it> Hi all, why "xterm" can't start anyway after a common update? Startxwin.sh script appears to run the graphic environment, so that programs like, oclock, xclock work correctly. Here is the cygcheck -svr report attached Thank you bye Christian Lanconelli -------------- next part -------------- A non-text attachment was scrubbed... Name: cygcheck.out Type: application/octet-stream Size: 42840 bytes Desc: not available URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From knellis@syntek-usa.com Fri Sep 29 16:50:00 2006 From: knellis@syntek-usa.com (Kenneth Nellis) Date: Fri, 29 Sep 2006 16:50:00 -0000 Subject: stifling XWin.exe.stackdump Message-ID: <002101c6e3e6$f7dae960$be32000a@idirect.net> I write to share the solution to a problem I didn't know I had until I tripped over it this morning. For various reasons, I have not upgraded to the 6.8.99.901 versions of Xwindows. Each time I opened a new xterm window with startxwin.bat after the XWin.exe server was already running, I was generating a XWin.exe.stackdump file in the "My Documents" folder. This event was responsible for 2+ seconds burst of disk activity. By removing write access to the file (chmod -w), writing to this file is stifled, eliminating the burst of activity. An interesting aside: Before removing write access to the file, I attempted to stifle the disk activity by redirecting it to the bit bucket: $ ln -sf /dev/null XWin.exe.stackdump What resulted, however, is that the sym-link was converted to a Windows shortcut and the file with the same name was created. So, in both the Cygwin and the Windows worlds, I add two entries with the exact same name. Here's the before and after "ls" output: Before: $ ls -ld XWin.* lrwxrwxrwx 1 knellis sweng 9 Sep 29 12:19 XWin.exe.stackdump -> /dev/null $ After: $ ls -ld XWin.* -rwx------+ 1 knellis sweng 1249 Sep 29 12:21 XWin.exe.stackdump -rwx------+ 1 knellis sweng 1249 Sep 29 12:21 XWin.exe.stackdump $ For the curious, "cygcheck -svr" output is attached. --Ken Nellis -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: cygcheck.out.txt URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From gg@urxn.at Fri Sep 29 20:53:00 2006 From: gg@urxn.at (Gerhard Gonter) Date: Fri, 29 Sep 2006 20:53:00 -0000 Subject: windows patch breaks cygwin/x Message-ID: <451D87A6.1040701@urxn.at> FYI, after installing the windows patch for ms06-055 [1], Cygwin/X didn't start anymore. After removing that patch, Cygwin/X worked again. The text on the M$ page doesn't explain what the patch does, but the patch is clearly b0rked. REF: [1] http://support.microsoft.com/?kbid=925486 -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From scott@ohelp.com Fri Sep 29 23:03:00 2006 From: scott@ohelp.com (Scott Fordin) Date: Fri, 29 Sep 2006 23:03:00 -0000 Subject: 1.5.21: startxwin.sh works, startxwin.bat does not work Message-ID: <451DA615.6070206@ohelp.com> Hi, I just rebuilt my Win2K machine and did a fresh install of all packages in the Cygwin and Cygwin-X 1.5.21 distributions. When I tried running the C:\cygwin\lib\Singular\startxserver.bat script, the X server startup failed with the following error: ----------------------------- Snip ----------------------------- 'C:\cygwin\lib\lapack' is not recognized as an internal or external command, operable program or batch file. ----------------------------- Snip ----------------------------- I then tried the /usr/X11R6/bin/startxwin.bat script and got the same error. Two things are weird about this: 1. /usr/X11R6/bin/startxwin.sh works just fine; it's only the bat file that fails. 2. The same Cygwin/Cygwin-X distribution works just fine on my XP machine. I even tried installing Cygwin on my Win2K machine using the packages that I had downloaded to my XP machine. I've tried totally removing and reinstalling Cygwin a couple of times already. I'm running Windows 2000 SP4 on an AMD Athlon64 3500+ with 2GB DDR RAM and an ATI Sapphire Radeon 9600 Atlantis with 256MB SDRAM. Output from cygcheck -s -v -r > cygcheck.out is attached. Thanks in advance for any assistance you may be able to provide. Cheers, Scott Fordin -------------- next part -------------- A non-text attachment was scrubbed... Name: cygcheck.out Type: application/octet-stream Size: 76725 bytes Desc: not available URL: -------------- next part -------------- -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From r.berber@computer.org Fri Sep 29 23:19:00 2006 From: r.berber@computer.org (=?ISO-8859-1?Q?Ren=E9_Berber?=) Date: Fri, 29 Sep 2006 23:19:00 -0000 Subject: 1.5.21: startxwin.sh works, startxwin.bat does not work In-Reply-To: <451DA615.6070206@ohelp.com> References: <451DA615.6070206@ohelp.com> Message-ID: Scott Fordin wrote: > I just rebuilt my Win2K machine and did a fresh install of all > packages in the Cygwin and Cygwin-X 1.5.21 distributions. > > When I tried running the C:\cygwin\lib\Singular\startxserver.bat -----------------------------------------^^^^^^^^^^^^^^^^^^^^^^^^^ That is not from the Cygwin distribution. You seem to have installed something else on top of Cygwin. > script, the X server startup failed with the following error: > > ----------------------------- Snip ----------------------------- > 'C:\cygwin\lib\lapack' is not recognized as an internal or external > command, operable program or batch file. > ----------------------------- Snip ----------------------------- So? That means the above .bat file is trying to execute something else that also doesn't come with Cygwin... and is not even an executable. > I then tried the /usr/X11R6/bin/startxwin.bat script and got the > same error. If you received the same error message then something, not Cygwin, messed up your installation. Same error probably means you executed the same file, are they really named startxserver.bat and startxwin.bat, or is just a typo? > Two things are weird about this: > > 1. /usr/X11R6/bin/startxwin.sh works just fine; it's only the > bat file that fails. > > 2. The same Cygwin/Cygwin-X distribution works just fine on > my XP machine. I even tried installing Cygwin on my Win2K > machine using the packages that I had downloaded to my XP > machine. > > I've tried totally removing and reinstalling Cygwin a couple of > times already. Did you check what was left on the above directory? If Cygwin did not install whatever is there it will not delete it. [snip] -- Ren? Berber -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From scott@ohelp.com Sat Sep 30 00:06:00 2006 From: scott@ohelp.com (Scott Fordin) Date: Sat, 30 Sep 2006 00:06:00 -0000 Subject: 1.5.21: startxwin.sh works, startxwin.bat does not work In-Reply-To: References: <451DA615.6070206@ohelp.com> Message-ID: <451DB516.1010403@ohelp.com> Thanks for replying, Ren??. My responses are embedded inline. Ren?? Berber wrote: >> When I tried running the C:\cygwin\lib\Singular\startxserver.bat > -----------------------------------------^^^^^^^^^^^^^^^^^^^^^^^^^ > That is not from the Cygwin distribution. Dunno. I ran the latest official Cygwin setup.exe, and chose to install *all* the packages at one of the mirrors listed in the install window: ftp://ftp-stud.fht-esslingen.de/pub/Mirrors/sources.redhat.com/cygwin The Singular stuff came with that. > You seem to have installed something else on top of Cygwin. Nope. Just the stuff that came through the Cygwin install. >> ----------------------------- Snip ----------------------------- >> 'C:\cygwin\lib\lapack' is not recognized as an internal or external >> command, operable program or batch file. >> ----------------------------- Snip ----------------------------- > > So? That means the above .bat file is trying to execute something > else that also doesn't come with Cygwin... and is not even an > executable. Again. Dunno. It's what came with the distro. >> I then tried the /usr/X11R6/bin/startxwin.bat script and got the >> same error. > > If you received the same error message then something, not Cygwin, > messed up your installation. Same error probably means you executed > the same file, are they really named startxserver.bat and > startxwin.bat, or is just a typo? Nope. Two different files. startxserver.bat came with the Singular stuff. startxwin.bat is the standard batch file included with Cygwin in /usr/X11R6/bin. Again, the two things to remember here are that startxwin.sh works just fine, and this exact same distro -- Singular stuff included -- works just fine on my XP machine. Moreover, before I rebuilt this Win2K box, this distribution worked just fine as well. >> I've tried totally removing and reinstalling Cygwin a couple of >> times already. > > Did you check what was left on the above directory? If Cygwin did > not install whatever is there it will not delete it. I completely deleted the Cygwin directories, which included the Singular stuff. Thanks again, Scott -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From r.berber@computer.org Sat Sep 30 01:09:00 2006 From: r.berber@computer.org (=?ISO-8859-1?Q?Ren=E9_Berber?=) Date: Sat, 30 Sep 2006 01:09:00 -0000 Subject: 1.5.21: startxwin.sh works, startxwin.bat does not work In-Reply-To: <451DB516.1010403@ohelp.com> References: <451DA615.6070206@ohelp.com> <451DB516.1010403@ohelp.com> Message-ID: Scott Fordin wrote: > Thanks for replying, Ren?. My responses are embedded inline. > > Ren? Berber wrote: >>> When I tried running the C:\cygwin\lib\Singular\startxserver.bat >> -----------------------------------------^^^^^^^^^^^^^^^^^^^^^^^^^ >> That is not from the Cygwin distribution. > > Dunno. I ran the latest official Cygwin setup.exe, and chose to > install *all* the packages at one of the mirrors listed in the > install window: > > ftp://ftp-stud.fht-esslingen.de/pub/Mirrors/sources.redhat.com/cygwin > > The Singular stuff came with that. You are right. I just checked http://cygwin.com/packages and the startxserver.bat comes with singular-icons (strange, but then I don't use Singular). [snip] >> So? That means the above .bat file is trying to execute something >> else that also doesn't come with Cygwin... and is not even an >> executable. > > Again. Dunno. It's what came with the distro. OK, it seems that the startxserver is not even a valid script (I haven't tested, I don't have Singular, I'm saying that from the result you had). Question: Why were you trying to start XWin with that bat file? I don't know what it is for, but seems redundant. >>> I then tried the /usr/X11R6/bin/startxwin.bat script and got the same >>> error. [snip] Now to the real problem: are the files different? They should be. There is no reference to the Singular directory in the normal startxwin.bat file... check for symbolic or hard links, perhaps Singular's (post)installation is doing something wrong. I see no other explanation for getting the same error message. -- Ren? Berber -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/ From net61b@gmail.com Sat Sep 30 09:08:00 2006 From: net61b@gmail.com (B52) Date: Sat, 30 Sep 2006 09:08:00 -0000 Subject: Fwd: windows patch breaks cygwin/x In-Reply-To: <3a24bfbb0609300205p1d780412ld181321b6b2a0d6@mail.gmail.com> References: <451D87A6.1040701@urxn.at> <3a24bfbb0609300205p1d780412ld181321b6b2a0d6@mail.gmail.com> Message-ID: <3a24bfbb0609300208w29e7169bq8e68ace4cca661b8@mail.gmail.com> On 9/30/06, Gerhard Gonter wrote: > FYI, > after installing the windows patch for ms06-055 [1], Cygwin/X didn't > start anymore. After removing that patch, Cygwin/X worked again. The > text on the M$ page doesn't explain what the patch does, but the patch > is clearly b0rked. > > REF: > [1] http://support.microsoft.com/?kbid=925486 I have KB925486 installed on my XP also but my Cygwin/X seems to work fine... -- Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple Problem reports: http://cygwin.com/problems.html Documentation: http://x.cygwin.com/docs/ FAQ: http://x.cygwin.com/docs/faq/