[setup - the official Cygwin setup program] branch topic/libsolv, created. release_2.881-36-gff0bb3d

jturney@sourceware.org jturney@sourceware.org
Fri Sep 29 17:37:00 GMT 2017


        at  ff0bb3d00edcf431501a379e63a9246406322f02 (commit)


https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=ff0bb3d00edcf431501a379e63a9246406322f02

commit ff0bb3d00edcf431501a379e63a9246406322f02
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Fri Sep 29 14:46:46 2017 +0100

    Use solver for initial pick list when upgrading
    
    Use the solver to determine initial pick list for Curr or Test, rather than
    directly picking packages. Thus the solver's initial solution in the pending
    view should be the first thing the user sees.
    
    Note: Keep is magical, and the package db pick list gets reset by
    ChooserPage::keepClicked(), rather than going through changeTrust().
    
    We don't unify these two paths, because the trust level passed to
    changeTrust() gets recorded in PickView::defTrust and used by the line
    picker in some mysterious way, and seems to only be expected to be
    TRUST_CURR or TRUST_TEST.  There's probably a subtle bug here, in that the
    line picker might behave differently depending on if Curr or Test was
    selected before Keep.
    
    Drop passing upgrade flag to solver run after the user has made their
    selections: the picker selection now reflects what the user is asking for.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=ebd587a795e529473127897db159abc74e2e02a7

commit ebd587a795e529473127897db159abc74e2e02a7
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Fri Sep 29 14:18:44 2017 +0100

    Make removeEmptyCategories() explicit, rather than a side effect of defaultTrust()
    
    It's unclear that this can ever do anything.  The list of categories is
    built as we see packages in those categories, so I don't know how we can
    ever get an empty category.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=808105ef8b2bbabbb636345eb8107615c537376f

commit 808105ef8b2bbabbb636345eb8107615c537376f
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Fri May 26 14:30:40 2017 +0100

    Handle 'Source:' lines in setup.ini
    
    This is somewhat awkward:
    
    Storing the source package by Id rather than by name is looking a bit like a
    premature optimization, but being to able to refer to source packages by Id
    is very handy.
    
    If the src pkg isn't seen until after the pkg, we don't know what it's Id
    will be.  So we have to go back and fixup the Ids after we've seen all
    packages.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=786a0b88c5efbde562396241e7130ef1dc359431

commit 786a0b88c5efbde562396241e7130ef1dc359431
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Tue Sep 26 19:43:12 2017 +0100

    Link with libregex rather than libgnurx
    
    Use -lregex rather than -lgnurx, as the Fedora mingw{32,63}-libgnurx
    cross-packages only contain the library under that name.
    
    (The Cygwin mingw63-{i686,x86_64}-libgnurx cross-packages have both names).

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=fa6b1b6b3d733495c8024a67a99c0b1e88fc0474

commit fa6b1b6b3d733495c8024a67a99c0b1e88fc0474
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 16 11:39:40 2017 -0400

    Allow user to refuse the default problem solutions
    
    Add new method SolverSolution::db2trans to change the solver's
    transaction list to reflect the package database.  Use it if the user
    refuses the default problem solutions.  Reinstate warning that this
    could cause breakage.
    
    Remove PrereqPage::OnMessageCmd, which is no longer needed (and which
    disallows clicking Next if the "Accept default problem solutions" box
    is unchecked).

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=b4a62044abb8d9a23a6c9685adb6716f87e8df6b

commit b4a62044abb8d9a23a6c9685adb6716f87e8df6b
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 16 11:32:57 2017 -0400

    Try to improve the solver's default solution
    
    Set the solver flag SOLVER_FLAG_FOCUS_BEST.  This helps in the
    following situation: A required package has an update available.  The
    user chooses uninstall.  Without the flag the default solution is to
    keep the (outdated) package.  With the flag the default is to upgrade.
    It remains to be seen whether the flag has any undesired effects.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=4a20af748124e5d0febf5e8e430946fb69196c79

commit 4a20af748124e5d0febf5e8e430946fb69196c79
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 16 11:28:37 2017 -0400

    Add a ficitious "base" package that requires all Base packages
    
    Modify the solver's problem report so that it refers to "Base
    packages" rather than the "base" package.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=2c010aa36f720cbeccd7db1645ca85a640396ef0

commit 2c010aa36f720cbeccd7db1645ca85a640396ef0
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 16 11:23:04 2017 -0400

    Mention how you can see what packages were added to resolve dependencies

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=0cd3291c5b39d4409302f5e50a6debac071b9d06

commit 0cd3291c5b39d4409302f5e50a6debac071b9d06
Author: Ken Brown <kbrown@cornell.edu>
Date:   Fri Sep 8 11:16:24 2017 -0400

    Add new member function SolverSolution::trans2db
    
    This resets the package database to reflect the solver's transaction
    list.  Call this if the user clicks Back on the Prerequisite page, to
    allow reviewing and making changes before accepting the solver's
    solution.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=9d204326e366f3f65c57569d40dadb597e2594d4

commit 9d204326e366f3f65c57569d40dadb597e2594d4
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 16 10:50:37 2017 -0400

    Factor out SolverTasks::setTasks()
    
    Move the code from prereq.cc that makes a solver task list from packagedb
    state into a new function SolverTasks::setTasks.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=b92c4e88fb7beb9bc572262aa938f8b9d9cf778e

commit b92c4e88fb7beb9bc572262aa938f8b9d9cf778e
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 2 14:35:58 2017 -0400

    Simplify code in install.cc

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=b31880128e9e6115f37453306157df0d52e13a6c

commit b31880128e9e6115f37453306157df0d52e13a6c
Author: Ken Brown <kbrown@cornell.edu>
Date:   Mon Sep 4 16:44:31 2017 -0400

    Fix 'SolverTasks::taskList' typedef
    
    Remove the '&'.  This was causing source installs to all refer to the
    same package, due to the call to q.add(pkg->desired.sourcePackage(),
    SolverTasks::taskInstall) in PrereqChecker::isMet.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=3b8ef4d7d8a415a54e05745ebd9d38a0f95cbeb3

commit 3b8ef4d7d8a415a54e05745ebd9d38a0f95cbeb3
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 2 14:27:52 2017 -0400

    Download only the packages being installed

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=902dd684be14d3882db1221741cea2babebac512

commit 902dd684be14d3882db1221741cea2babebac512
Author: Ken Brown <kbrown@cornell.edu>
Date:   Wed Sep 6 10:44:27 2017 -0400

    Don't create an "_installed_test_" repo
    
    This prevents libsolv from knowing that an installed test release is
    installed, since pool->installed is "_installed".

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=f25f25ca54b1c52294f957802acbadf477e75c41

commit f25f25ca54b1c52294f957802acbadf477e75c41
Author: Ken Brown <kbrown@cornell.edu>
Date:   Tue Sep 5 22:22:23 2017 -0400

    Allow the installation of test packages without setting "Test" globally
    
    Instead of disabling test repos when "Test" is not selected, just give
    them lower priority than ordinary repos.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=4f0e57d5cfdc0c0587858c34f5cfd3d4d8cddbe1

commit 4f0e57d5cfdc0c0587858c34f5cfd3d4d8cddbe1
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 16 10:06:26 2017 -0400

    Ask solver to check dependencies of installed packages

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=02bd4e0c3ccbb1aa3dd8335a2e2d6eebf26ac07a

commit 02bd4e0c3ccbb1aa3dd8335a2e2d6eebf26ac07a
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 2 12:37:29 2017 -0400

    Improve the reading of installed.db
    
    When creating a packageversion for a package listed in installed.db,
    use the information for the installed version rather than the
    "current" version.  Add a new function packagedb::findBinaryVersion to
    help with this.
    
    Get as much information about an installed information as possible
    from the prior reading of setup.ini.
    
    Improve detection of installed test releases.  An installed test
    release might not appear in setup.ini because it is no longer
    available (e.g., it might have been replaced by a newer test release).
    Detect this by comparing its version to the current version.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=56aec9961c767ed994e331d431e5ba66d6f5015a

commit 56aec9961c767ed994e331d431e5ba66d6f5015a
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Fri May 26 14:30:40 2017 +0100

    Add a PackageSpecification() constructor which takes a package name and version

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=e82e7095a795319882defbb8ee0675d73bcd7320

commit e82e7095a795319882defbb8ee0675d73bcd7320
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 16 07:19:55 2017 -0400

    Add SolvableVersion::obsoletes()
    
    v2: Add SolvableVersion::obsoletes(), factor out key-to-deplist code from
    SolvableVersion::depends() as SolvableVersion::deplist()

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=c0849642e227f24a553422ea6a37008b0779ad00

commit c0849642e227f24a553422ea6a37008b0779ad00
Author: Ken Brown <kbrown@cornell.edu>
Date:   Sat Sep 2 11:57:25 2017 -0400

    Fix setup.ini parsing
    
    The IniDBBuilderPackage::process function wasn't fully resetting the
    addPackageData for a new version of a package.  This caused SHA512
    failures among other things.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=b43b697684a19b4b36447b493874cd64ec603c8f

commit b43b697684a19b4b36447b493874cd64ec603c8f
Author: Ken Brown <kbrown@cornell.edu>
Date:   Wed Aug 30 17:36:13 2017 -0400

    Don't override a Keep selection

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=56151ae0050f4e2227608aea053b82642dd4d896

commit 56151ae0050f4e2227608aea053b82642dd4d896
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Mon May 22 18:04:02 2017 +0100

    Add obsoletes: support
    
    Note that we need separate depends and obsoletes nodelists

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=3a076f96b09ef863ea7fcede061723d8eb28d754

commit 3a076f96b09ef863ea7fcede061723d8eb28d754
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Fri May 19 11:26:07 2017 +0100

    Download/checksum/install/uninstall what transaction wants
    
    Some of this goes rather around the houses to avoid lots of churm: In lots
    of cases, we're looking up packagemeta for a given packageversion just so we
    can use the pacakgemeta to access the name, which we could do via
    packageversion just as easily.
    
    We do actually need packagmeta for a couple of things: To note the package
    as installed/uninstalled, and to note postinstalls scripts.
    
    If IncludeSource is on source packages installs will have been added to the
    task list in post-processing, so we don't need to handle that specially
    anymore.
    
    Source packages to be installed are kept in a separate queue as they are
    installed differently to binary packages (root is /usr/src, install isn't
    recorded, etc.)

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=f02c77316dbde7bb09d94629c24ff7e889229e1a

commit f02c77316dbde7bb09d94629c24ff7e889229e1a
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Sat Apr 29 15:43:52 2017 +0100

    Use solver to check for problems and produce a list of package transactions
    
    Convert chooser UI selections into a SolverTaskList
    
    Apply SolverSolution to that task list (with choice of keep, upgrade,
    upgrade with test, IncludeSource) to produce a vector of SolverTransactions.
    Store a solution object in packagedb
    
    The transaction list returned by the solver is postprocessed to add
    reinstall and IncludeSource actions
    
    Very crudely present solver problems in the PrereqChecker page UI, as text.
    Change tickbox to say "accept default solutions" and don't allow to preceed
    unless those solutions are accepted (ideally we would have a UI to choose
    solutions).  Remove warning about missing dependencies.
    
    Also pass initial trust state to PrereqChecker
    
    v2:
    Fix comment typo (kbrown)
    Tweak comment in OnActivate() (kbrown)

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=50a044a2491305d871bd0795f5b09e46113f8b22

commit 50a044a2491305d871bd0795f5b09e46113f8b22
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Sat Apr 29 15:39:46 2017 +0100

    Drop in SolvableVersion as a replacement for packageversion

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=13cf2fa2b5e11bf4ed145aa51817804dfdeab214

commit 13cf2fa2b5e11bf4ed145aa51817804dfdeab214
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Fri Apr 28 17:39:26 2017 +0100

    Remove packageversion class
    
    Remove packageversion, _packageversion, defaultversion classes

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=25f7bd1371e8068f62d95171088b6a383d96edbe

commit 25f7bd1371e8068f62d95171088b6a383d96edbe
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Fri Apr 28 15:26:05 2017 +0100

    Remove cygpackage class
    
    v2:
    Fix typo in bootstrap.sh (kbrown)

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=b7f7bb4491a8c555f996123c2b5474110ca8b70b

commit b7f7bb4491a8c555f996123c2b5474110ca8b70b
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Fri Apr 7 21:52:17 2017 +0100

    Change to using a libsolv pool for storing package information
    
    Add class SolverVersion, a wrapper around a Solvable Id. The interface is
    similar to class packageversion, the name change is just to make sure I've
    got everything.
    
    Place test packages into separate repos.
    
    Expressing that curr: packages are preferred to prev: ones when that is not
    the version number ordering should be done with epoch numbers.
    
    Wire up various bits of data in packageversion to Solvable attributes,
    including sourcepackage, stability, archive (packagesource) and depends.
    
    Store sourcePackage() by the id rather than name, for much faster lookup.
    
    SolverVersions for the same package can be ordered and compared by evr.
    
    Factor out packagedb:addBinary() and also use it in IniDBBuilder, rather
    that inlining the process of adding a package there. Add an analagous
    packagedb:addSource() to do the same thing for source packages.
    
    Change to reading installed.db after setup.ini's have been read, so we can
    supplement the installed.db packages with information from setup.ini.
    
    Make packagemeta::add_version() check for successful insertion of version.
    Record the version at a stability level. The last version wins in setting
    curr/test.
    
    Use a Solver object inside packagedb
    
    XXX: All SolvableVersion methods need to check for null solvable?

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=17ade2556ca4ebc824d25a10a864c3f1826f0d66

commit 17ade2556ca4ebc824d25a10a864c3f1826f0d66
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Mon Apr 24 20:17:36 2017 +0100

    Store package stability in class packageversion

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=752459c6cad36493daef38e46f8eba0a3bffd253

commit 752459c6cad36493daef38e46f8eba0a3bffd253
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Wed Apr 26 16:22:30 2017 +0100

    Hoist scan() up from packageversion to packagemeta

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=eb54ff88c506b96c580d5d1ea709945a6b8a52a2

commit eb54ff88c506b96c580d5d1ea709945a6b8a52a2
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Tue Apr 25 23:44:08 2017 +0100

    Hoist uninstall up to Installer::uninstallOne()
    
    This calls packagemeta, which applies to packageversion (which delegates
    through packageversion_ to cygpackage) to return lines from the .lst.gz file
    (pretending that we know it contains a file list for that specific version)
    and to remove the .lst.gz file when done.
    
    Move this all up into Installer::uninstallOne(), where it's all in the same
    place as the operation it is reversing, Installer::installOne().

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=e845067673b82c5d78c9e0c223806189cdbdbb2c

commit e845067673b82c5d78c9e0c223806189cdbdbb2c
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Wed Apr 26 15:20:14 2017 +0100

    Hoist pick() up to packagemeta
    
    We are always writing packagemeta.desired.pick(bool, packagemeta).  This
    kind of suggests something not quite right.
    
    The pick flag means install/reinstall, so despite being stored per
    packageversion, is only significant to download/install for the desired
    version.
    
    There's a slight wrinkle in that we want to also set/clear this flag for the
    source packageversion.  We can't change this to point to packagemeta rather
    than packageversion, as that may not be the same for all versions, so
    instead just track this flag separately as srcpicked.
    
    Note that there is still a complicated mapping between the state of desired
    and pick and the action represented in the UI:
    
    desired == empty, installed == desired : skip
    desired == empty, installed != desired : uninstall
    desired == installed, pick == true     : reinstall
    desired == installed, pick == false    : keep
    desired != installed, pick == true     : upgrade
    desired != installed, pick == false    : invalid

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=7ef1781d3ad388a0d1066969edcf317012423cc5

commit 7ef1781d3ad388a0d1066969edcf317012423cc5
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Tue May 23 22:19:15 2017 +0100

    Hoist addScript() etc. up from packageversion to packagemeta
    
    We're only interesting in storing scripts and later running them from the
    desired version as we install it, so despite being stored per
    packageversion, this is only significant for the desired version.
    
    Hoist it up from packageversion to packagemeta.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=613b94663b9b008296545b077375934954930b83

commit 613b94663b9b008296545b077375934954930b83
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Sat May 20 16:17:44 2017 +0100

    Factor out reading installed.db
    
    Rather that doing implicitly the first time a packagedb is constructed, do
    it explicitly at a certain point in time that is early enough.

https://sourceware.org/git/gitweb.cgi?p=cygwin-apps/setup.git;h=dde47fb19969d178f8402c81824a9daacd66a7e7

commit dde47fb19969d178f8402c81824a9daacd66a7e7
Author: Jon Turney <jon.turney@dronecode.org.uk>
Date:   Fri May 5 12:36:42 2017 +0100

    Opaque how PackageDepends is stored
    
    We want to be more opaque about how the PackageDepends for a packageversion
    is stored, so rather than exposing a pointer to a PackageDepends object
    inside class packageversion, access it by value.
    
    This also makes us be more explicit about set/get of package depends()
    
    Fix some iterations to deal with depends() returning a value rather than a
    pointer.
    
    Also adjust dumpPackageDepends() appropriately
    Also remove useless debug showing the dependency list before we build it.





More information about the Cygwin-apps-cvs mailing list