[crosstool-ng/crosstool-ng] bc9ed3: Adds Raspberry Pi 3 sample config

[Bryan Hundven]

> On Mar 10, 2016, at 1:20 PM, Thomas Petazzoni <thomas.petazzoni@free-electrons.com> wrote:
> 
> Hello,
> 
> On Wed, 02 Mar 2016 12:11:45 -0800, Bryan Hundven wrote:
> 
>>  Changed paths:
>>    A samples/armv8-rpi3-linux-gnueabihf/crosstool.config
>>    A samples/armv8-rpi3-linux-gnueabihf/reported.by
> 
> I think it is not a good idea to have a configuration named after a
> board, as the discussion generated around this addition shows.
> 
> Indeed, an ARMv8 processor can run both in 32 bits mode or 64 bits mode
> depending on the use cases. So a single board like the RPi3 can
> require the use of either an ARM toolchain, or an AArch64 toolchain.
> 
> So, I think you should stick to configurations for processor cores, not
> boards. So:
> 
> 	arm-cortex-a15
> 	arm-cortex-a7
> 	aarch64-cortex-a53
> 	aarch64-cortex-a72
> 	...
> 
> Then, a RPi3 user can chose either an arm-* toolchain or an aarch64-*
> toolchain depending on what he wants to do.

I can agree with that. I’ll look into renaming the samples soon!

Cheers,

-Bryan
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 496 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <http://sourceware.org/pipermail/crossgcc/attachments/20160311/e7231fff/attachment.sig>